Mini Fridge Thermostat, Universal WPF-20 Freezer Thermostat Controller 2pin / Compatible with wpf16 and wpf18【Can Provide Installation Tutorial】

This fixed a Galanz mini fridge that I got for free. Easy fix that only took a few minutes to replace once I had the thermostat. It fit in the original location like a glove, the probe is about 6" longer than the original, but I just put an extra bend in it to fit in the original mount.

It did not have an "off" position that I could tell, the thermostat lead was twice the length I needed. All that's probably on me.

Thermostat works very well. The old one had smaller spade terminals and mounting holes a bit further apart than the new one, both both issues were easily corrected. Recommended.

Works well, easy install. Stock Kenmore knob doesn't fit well on thermostat (can't push it all the way in), maybe they should ship a knob? Knob indicator also seems off by about 270 degrees. The important things are it works, solved my problem and is a great price. Would buy again!

Easy to install and is working great! The original part for the fridge is no longer available. This part works as a direct replacement. Much less expensive than replacing the fridge.

It fit my refer is fixed.

Works great for my mini fridge. I did have to do adjustments to the right screw on the thermostat like 3 full turns to get it not to freeze on dial Number 3 . Also the dial set up is upside down compared to my original. I had to flip it as stated before by 1 reviewer . No biggie. But its working great in My Fireball Whiskey glass door Display mini fridge.

UPDATE 12/2/2024: This thermostat was initially quiet, then it got quite noisy, sometimes giving loud clacks and other times it sounded almost as loud as the doorbell (drove the dog nuts). After several days it quieted to a point were I was almost used to it. It cycled on for 2.5 minutes and then cycled off for 6.5 minutes. That's 2 clacks every 9 minutes. So I'm taking off 2 stars for that. It did keep the 1.7 cu ft Magic Chef at 35° degrees, spot on. The noise eventually got the better of me and I took the old OEM thermostat and shot it full of CRC contact cleaner then let it dry out for a day. The fridge still stays at 35° but now, unless it's very quiet in the room, I don't hear it cycle on/off at all. So I'll keep the one I bought as a spare and just continue to use the OEM because it's so quiet. It also has a longer run time, 6.5 minutes and then it cycles off for 15.25 minutes. There are some adjusters on the thermostat which may modify that swing time. --------------------------------------------------------------------------------- The thermostat in my Magic Chef 1.7 cu ft MCBR170W was working but it was making a loud click when cycling. I took it out once and shook it a few times, thinking it was carbon. That worked for a few months and then it started doing it again. I figured I'd better replace it. The original thermostat (picture) is a CS6448N / WPF16P-100-051, but this thermostat seems to be working just fine so far (1 day). The only things of concern are the 3 connector tabs (for the white, black green wires) are larger than the original so I had to trim them down with my Dremel so I could get the connectors on. The other thing is the sensor that connects to the bottom of the freezer. The original was maybe a foot long and this one is about twice that. I don't think you can cut that down because it's soldered on the end so I just coiled it up and attached to the bottom of the freezer, like the original. It's quiet, it's cooling, I'm happy. I hope I don't have to buy it again. :-)

Works great! My Danby chest freezer model is: DCF500W. The factory thermostat is: Wpf 31R-102 which I can find nowhere. This part replaced it perfectly.

Fonctionne très bien sur mon congelateur. Quand j'ai installé la sonde du thermostat au premier coup j'avais seulement-12°C mais j'avais entré la sonde trop profond dans la gaine. Après l'avoir retiré il reste entre -22°c et -19c° température idéal

Good product

This item works with my compact Kenmore Refrigerator model # 461.90182 and was easy to install. Original thermostat is no longer available.

Solution a un problème. Peu coûteux. Facile a installer,Au lieu de changer frigo