12V CPU Cooling Fan, Extruded Aluminum Heatsink CPU Cooler Hydraulic Bearing 2200RPM High Speed 7015 Silent Fan for

My 12 year old cooling fan died and the heat buildup fried my AMD Quad core 965 cpu. I upgraded to an AMD 6 core and used this fan to replace my old one. I installed the fan on my original heatsink with no problems or modifications. I did not use the low profile heatsink that came with the fan because the 6 core is a 125 watt CPU and my research indicated that the low profile heatsinks were good for 90 watt CPU's. I could not find any CPU wattage information for this unit. It used to make a lot of fan noise when I powered up because the fan automatically ran full speed until the motherboard controller slowed it down. I found a BIOS setting that eliminated that and the CPU normally runs between 26 to 28 degrees C and the fan is very quite.

Works great and easy to install.

You're getting what you pay for. Feels flimsy. Like I could easily bend the metal with my fingers, but when I attached it to the motherboard I was happy with it. It did come pre-thermal pasted which was strange. I read another review where they stated they didn't remove the old thermal paste. I guess they thought it was a used product which it isn't. Size wise it is pretty small. Like just double the squared size of the CPU, which if you're short on space is really nice. Had a heatsink once that was too big for the PC case. Modern PCs are damn near silent. Sound wise It's as loud as a 90s PC. Not that big of a deal.

My desktop computer didn't have an internal fan just the one on the CPU. I was having problems with it shutting down. So I thought it was a bad CPU fan which it was I replaced it and after a while of running my computer shut down again so when I went in there to check I found that the hard disk were really hot. So I got this cooling fan to put into the case. I mounted it underneath the hard disks and I've hadn't had that troublesome. It's quiet and it puts out a lot of air. And it keeps my heart just cool

The fan ran very slowly and never changed speeds. When I touched the fan blades the fan stopped and wouldn't restart automatically (weak motor). I've had cooling fans if you tried to touch the blades while running you'd lose a knuckle! I tried it on two motherboard to verify it wasn't a MB issue. I almost burnt up a CPU with this fan. Bottom line is I returned the fan because I could not trust it.

I have an old, home-built computer that uses an older AMD processor. The original CPU fan had begun making an unacceptable level of noise. I didn't want to spend a lot of money on a fan, but I did want to correct the noise. This fan was inexpensive and was touted as a silent fan, so I bought and installed it. Works just fine. Nice and quiet.

When I boot the computer, the fan is very noisy and takes a minute or so to reach full RPM. This is after the computer has been shut down for a few minutes.

Came with multiple heatsink plates bent and looked like someone had used it as a hockey puck, but what do you expect for $13? I unbent the plates and installed the cooler. It's fairly quiet and seems to work as advertised. Came with a 1.5 gram thermal compound syring, which is almost worth the cost of the unit. I would not buy again, but I'm fairly satisfied with this one-time purchase.

todo perfecto

The new fan needed to be mounted on the old heat sink - easily done. Four screw spacers on the fan had to be removed. It snapped onto the old heat-sink The heat sink that came with the fan was pre-coated with thermal paste. The assembly was packaged sitting on a piece of plastic. I did not realise that it already had the paste applied and put the head sink down on the table and got the paste on the table-top. This was not a problem as I did not need or use the new heat-sink. The new fan is very quiet. Between the old fan and the old heat-sink there was a thick wad of dirt, dust, hair, etc. In the future I'll inspect the new fan (on the old heat-sink) periodically and clean it as needed.

I bought this as a replacement for a 13-year-old Asus desktop computer the fan and even the heatsink were entirely covered in grime and dust and black residue from smoking around it over the years, this product was perfectly easy to install and works well. However, I do believe my PC is attempting to run it at 3200 rpm instead of 2200 rpm causing my computer to restart. So please be aware of this.

Excelente producto y muy útil sin tener que comprar el procesador

Cooling fan is bit noisy, but I use it in headless server which is in a mechanical room - I'm not always around it, so can live with it. But fan noise is a sign that fan will fail eventually. Considering low price and my urgent need for CPU cooler (old failed) - works for me