PLA PRO Filament

The Polymaker PLA PRO 1.75mm filament prints smoothly and delivers parts that feel tougher than standard PLA. Layers bond well, overhangs print clean, and the finish has a consistent matte look that gives projects a professional appearance.It feeds reliably without tangles or jams, and I’ve had consistent diameter across multiple rolls. Prints hold up to stress better than basic PLA, making it a good choice for functional parts and prototypes.I’ve used it regularly for business production, and the quality has been dependable with every order. It works well with Bambu Lab A1/P1S. Sealed in an airtight bag with a desicant inside. Ready to print, no need to dry before printing.Great value for the price!

The media could not be loaded. So to start off, this 3D general FDE polylite PLA pro is pretty amazing and I’m about to buy my 3rd&4th rolls.Dimensional accuracy is slightly better than .05mm where I checked but I didn’t take pictures of my gauge and only checked twice during 1 long (34hr) print about halfway through the roll.It’s got great properties all around, including both impact resistance and rigidity. It’s flexible but still very stiff. I haven’t tested the heat resistance, although it’s not something I’m terribly worried about.It’s super easy to print with and it prints really well with great layer adhesion, some slight warping on steep overhangs and really thin areas if you don’t use fans. I used 30-50% fans and printed relatively slow for anything too crazy and was virtually warp-free. I probably could’ve printed faster tbh but I prefer quality over speed. (The brace and hand stop were printed on an sv06 using the default prusaslicer speed settings with default dynamic overhang speeds and fan at 40% bridges at 100% and they printed perfectly.The only time I had any stringing at all was about a week into using the roll without drying it. I dried it for 6hrs at 55°c in a sunlu dryer box and it was good to go again. So I do recommend keeping it dry or drying it periodically, as it shows more hydrophilic tendencies or symptoms than other PLA plus filaments I’ve used.It has an incredibly awesome matte/flat finish that’s really hard to get with most other PLA plus filaments (that’s probably my favorite feature of this filament tbh), and the color is really great although it’s more of a desert tan than FDE in my opinion. I guess desert tan could be considered a shade of fde these days with how many different shades there are lol but it’s fairly light.All in all it’s absolutely awesome and I’ve almost completely switched over from eSun (except for a couple amazing colors that eSun does best like the olive green *chef’s kiss* and their grey is awesome too).Still giving 5 stars even tho I wish the color was more of a true FDE. Can’t beat the printability or material properties. And that matte finish tho 🤌👌

I've been using Hatchbox PLA, eSUN PLA+, and ELEGOO Plus for the last few years, but I saw a few posts on reddit saying how much better Polymaker PLA Pro is and decided to give it a try. I'm happy to say that the hype was well-deserved. It's by far the best filament I've ever tried. I primarily print small D&D minis with my Ender 5 and when I compare a mini made from Polymaker PLA Pro vs any of the other brands I listed above, the Polymaker PLA Pro minis are stronger with less stringing and a little more detail than any of the other options.The layer adhesion is notably better with a much smoother and clean finish. Because the layer adhesion is so strong thin parts that usually bend or break during printing come out clean and strong. For me, that means I can print minis with thin legs or small tools and they not only come out looking great but have enough strength to be handled. Many of my minis have scales or chainmail and other tiny details that used to be washed out, but now all the small details are there. Some minis have spears or sharp spikes and those used to come out slightly rounded and blunt, using the playmaker they come out so sharp I have to dull them a bit.Usually, I print minis at 130% size so all the details come out, but with this filament, I can print them at their standard size. This saves me a ton of time and filament and the minis are still stronger and less brittle than the other brands I've tried.If I'd known how much better my minis would be I would have been buying this stuff from the start. It's slightly more expensive, but it quickly pays for itself when you have no failures and your prints are strong enough that they don't need to be reprinted. I'm not sponsored or anything, it really is that much better and has really upped the quality of my minis. 10/10

This is the one to use. This is better than Regular/Basic PLA. When printed it feels much stronger than Regular PLA. I have used many spools and in different color and they all print fine. No tangling whatsoever. And my Nozzle does not get any clogs. Always print functional parts and my Bambu is dialed in perfect and parts come out very accurate.

At first I didn’t really like the color, but I’ve since bought 3 rolls of this FDE print general and I will say it is by far my favorite pla+ filament. Prints great, finishes great, super strong, and I’ve found myself printing with this the most. Great stuff! Will definitely purchase more in the future!

Great filament, good color, functional and great value. Have yet to buy a spool that has a tangles . I have not had any clogging issues with polymaker filaments.