BrosTrend Dual Band 1200Mbps WiFi Bridge, Convert Your Wired Device to Wireless Network, Works with Any Ethernet-Enabled Devices, WiFi to Ethernet Adapter with Standard RJ45 LAN Port, Easy Setup

The CAT5 cable from my ISP's router to my desk somehow failed after installation of new router. The WiFi-Ethernet bridge was easy to install and connect to ISP's Wifi, and works very well. The only downside is that all devices downstream from the bridge no longer appear as connected devices of the router. The address reservations and port forwarding settings for my devices in the router appear to be working, but changing them could be a challenge. May have to run temporarily a CAT5 cable from my office to the router, make the changes, then go back to WiFi.

Very nice device. Simple to set up. Have used three units for remote printing at different distant locations. Works nicely.

For anyone needing to get ethernet connectivity to a location where WiFi is the only option, this bridge handles it. Reliable, decent speeds, stable connection. Networking gear should solve problems without creating new ones and this does exactly that. A specific tool for a specific need that works well.

the wifi bridge works flawlessly and setup ib a breeze. would have given 5 stars but i can only get 100/100 (Mbps). My PC has a Realtek Gaming 2.5GbE so i wish i could get at least 1Gb.

This is a solid and cheap little WiFi extender and 'ethernet to WiFi' adapter. Both WPS and WiFi GUI setup make this simple to get going. However, I looked at this as a way to boost the speed of my Xbox Series X WiFi, as the built-in adapter doesn't support gigabit WiFi. There is no way to disable the 'bridge' mode on this device, so it always acts as an extender even if you only need an ethernet to WiFi adapter. This slows the bandwidth significantly to about 100mbps in my testing. My Xbox on its own can get 200mbps with the built-in WiFi. Just a note for people who may be trying to use this device for the same purpose. I have nothing bad to say about it and will keep the device on hand for other projects. Older devices that only have ethernet will almost all benefit from a 100mbps connection to the internet.

I purchased this wifi bridge so that I could connect my laser machine to the wifi network. It works great so far. It connects to my router quickly and the speed is good enough for the laser machine. This bridge does broadcast an SSID and because of this, I unplug it when I am not using it. Overall, it works as intended.

The device stopped working in the first hour of use. It was configured correctly and working great, but suddenly stopped working and can no longer be connected to. The power LED remains off while plugged in. The power LED is supposed to remain on while the device is plugged in, so this is definitely a problem with the adapter. It cannot be reset, cannot be reconfigured, and unplugging/replugging does nothing. I hope they reach out to me to replace it, but I will leave this review online until they do. Right now, this device is an expensive paperweight.

I mainly got this as a WiFi to Ethernet bridge but after setting up the WiFi extender and connecting my device to this bridge via the supplied 3’ Ethernet cable it got no signal. So after some troubleshooting this device and mine I tried swapping their cable with a spare one I had. Voila! Everything works fine. Their supplied cable does NOT have all 8 wires but just the green/green-white and the orange/orange-white ones.

I have a Bluesound audio set up which is more stable with a wired internet connection but that was hard to achieve. I bought this device to provide a wired connection and it works perfectly. Set up couldn’t be easier. I plugged it in near my router, paired it with the press of two buttons, moved it to where it was needed and it connected straight away. Perfect!

Este repetidor de señal es una excelente opción para aparatos algo antiguos pero caros como un plotter o una impresora grande que solo tienen el conector USB tipo B y el Ethernet. o también para aquellos que solo pueden conectarse en la banda 2.4. Sincronizas el adaptador a tu wifi con la banda 5.0, lo echufas cerca del disposivo, le pones su cable ethernet y veras la diferencia.

This WiFi to Ethernet adapter works exactly as expected. Setup was quick and easy — just plug and play. It provides a stable and fast connection for devices without built-in WiFi. Great for smart TVs, gaming consoles, or PCs. Compact, efficient, and a solid solution for extending wireless connectivity. Highly recommended!

Bought this so I didn’t have to run a Ethernet cable across my room to my CCTV dvr from my router… I just plugged this into a socked beside my dvr and connect a small Ethernet from dvr to this. Job done !! Excellent signal, easy to connect to WiFi via wps button.

Works fine after 2 years, easy to set up, never any issues. Only down side is this cheaper model has a 100Mbps LAN port. Bought this so that my NAS can connect through wifi reliably. DIdn't disappoint.