Bullnose Rudder clamp on boat rudder fits a 1.125" transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured

I added a side trolling motor to my Kayak, I knew it wasn't an optimal placement but seen other people do it so I gave it a try. It was terrible, tracking was lopsided, turns were dangerous, and could only turn left and not right, I had put a time and money adding the mount and was going to end up spending more to make this work but somehow ended up finding this simple yet awesome attachment rudder. Was very quick and easy to install, did add some extra tape since the rod on my watersnake 24lbs was on the thinner side, also had to flip the rudder upside down. Once on the water it completely tamed the trolling motor. Was tracking straight, turns were smooth and was actually able to turn right which was impossible before and left with ease. This saved me a lot of headache, time and money also had a blast at the lake finally. Best $30 i've ever spent.

Perfect fit, kept my boat straight, in even light winds. It makes steering response quicker. Great product!

Excellent addition for the 30lbs thrust Min Kota motor I have. Makes a huge difference in tracking and steering my Saturn raft. It bolts right on to the motor shaft. We'll made product right here in the USA!

I would give it five stars, but I haven’t had it in the water yet. Installation was great. I put it on a Newport NK 180 Pro, and the clips fit perfectly. I trimmed a little off the corner (small end) of the rudder, and it mated right up to the motor. This install on my kayak is still in the trial-and-error phase, so I am still getting it all dialed in. I had the motor mounted too shallow. I was getting some cavitation, especially in reverse. I had to move the motor deeper to install the rudder, so that worked out fine. Now I’m waiting for the weather to warm back up so I can go back and try it all out. Before the NK 180 Pro install, I had a rudder on the back of my kayak. When the motor wasn’t running, I had no control over how my kayak drifted. Hopefully, now I will be able to control my drift as before.

Added sooo much more effective drive power to my trolling motor, even in seriously choppy water. Well worth the ourcase and easy to install.

The rudder installed in minutes and had a firm grip on the motor shaft. I had to cut off the top 2" of the rudder with fine hacksaw blade. This cut was just above the top clamp. This permitted me to raise the motor to my ideal height. Be advised that I am using trolling motor on a 17ft canoe and run the motor closer to the motor mount than most applications would. This modification went very smoothly. I sanded the cut with sandpaper to break the sharp edge. The results are ideal for the canoe. The canoe tracking and handling under power are greatly improved.

Amazing quality American made product, I wish installation instructions were a bit better or had a bar code to video.

Perfect for my trolling motor made the handling a lot better

Used on kayak steering project

Me funcionó muy bien ennla dirección del kayak para el cual lo utilizo, muy buena calidad, muy buen material y se ve muy resistente.

I added this to the trolling motor on my 15ft square-stern canoe. It has made a significant improvement to the handling of the canoe. Very happy with the purchase.

good buy

Solid product, well made.