ECHOGEAR SlimView TV Wall Mount for 32" to 80" TVs - 1.25" Low Profile with Pull String Locking System for Cable Access & Included Hardware for DIY Easy Install

This is a fantastic TV mounting bracket at an excellent price! I wanted a slim-profile bracket that would hold our new 65" LED HDTV. I ordered the ECHOGEAR Low Profile Fixed TV Wall Mount Bracket (for 32"-80" TV's), priced at $29.99. (Similar items were listed at over $100 at other big-box electronics-type stores.) This ECHOGEAR product is GREAT! The bracket consists of two heavy-gauge metal pieces that overlap and screw into the wall. Then there are two heavy-gauge metal braces, which each get screwed into the back of the TV, and can then be clipped onto the wall bracket. It arrived promptly with clear instructions and lots of different-sized screws to accommodate different TV manufacturers and bolts for attachment to studs through drywall. (There were instructions for mounting through concrete/cement, but we would have had to go and purchase the bolts/anchors they told you to get, so that would have been a bit of an aggravation if we were ready to mount then discovered we needed to go out and purchase additional tools.) Turns out the screw type and length we needed was one of the only type/size that WASN'T included in the package, but ECHOGEAR customer service was very responsive and said they'd mail out the necessary four screws to us right away. [Update: we were impatient to mount our new TV, and the screws from ECHOGEAR hadn't yet arrived after 1 week, so we were going to go to the hardware store and buy them ourselves, but it turns out those four screws we needed were included with the TV! ] Attaching the bracket to our studs through drywall was a BREEZE. (You will need to have a reliable stud-finder, however.) The bolts provided for bracket attachment to the studs were very large and solid/sturdy. Once the bracket was attached to the wall, and the braces were screwed into the holes in the back of the TV housing, it was so easy to clip/slide the TV over and onto the wall bracket. The TV can be slid on the bracket (on the wall) side-to-side for purposes of fine-tune centering adjustment horizontally once the TV is clipped onto the wall bracket, but there is no movement possible vertically or pivoting once the wall bracket is screwed in. (Note, as we're discussing this, this might be a bit of a potential design flaw; in theory, if the wall bracket wasn't secured close enough to center and you tried to make up for it by sliding the TV over, one could actually slide the TV off the bracket! That being said, we had at least 12 inches on either side of where our braces sit on the bracket, but we are thinking we might stick some putty or clay on the ends of the wall bracket to avoid an inadvertent disaster, should the cleaners or a painter decide to nudge the TV to the side!) The quick-release loops are a nice feature, and those we taped up with painter's masking tape to hide but maintain access. (Depending on where on the screw-hole/supports are located on the back of the TV, the loops may already be hidden by the bottom part of the TV. On the same TV in 55", the support bracket across the back of the TV was more in the middle of the TV; I think for the larger 65", the support bracket is lower due to center of gravity and stability.) The bracket does hold the TV against the wall with a very slim profile, but there's still 2.5" clearance so that HDMI and audio ports could be accessed, if necessary. All in all, very happy with my purchase. Would highly recommend.

I recently purchased a 65" Samsung TV and wanted a low profile mount for it -- after doing some homework, I came upon this EchoGear mount and saw it had fantastic reviews, so I ordered it up and it arrived a few days later. Called up a friend to help with the mounting and we got to work. It didn't take long to find out that the mount did not come with bolts that were long enough for the TV I purchased. So, I called up EchoGears' tech support and got a live human on the phone within seconds and explained the situation. The person I spoke with was super helpful and offered to ship me the required bolts FOR FREE. Holy smokes -- talk about customer service! (It is worth noting the that the mount comes with a huge array of bolts, spacers, washers, etc... I just ended up pulling the short end of the stick with my TV) A couple days after that, the bolts arrived as promised and they worked perfectly. Once the brackets were on the TV, it only took maybe another 25-30 minutes to get wall-side bracket mounted and TV attached. Quality on all of the pieces seemed very high, and my brother-in-law and I agreed the TV was not going anywhere once installed. Very sturdy and secure. Not many products I would say I would give 6 stars to, but this TV mount would qualify. It's certainly not an expensive product, but the bang:buck ratio is very high. Will absolutely recommend EchoGear mounts for friends and family.

This mount is criminally simple to install!! I needed something unique. I needed to mount a 39” TV into a recessed box in a travel trailer. (RV) Most flush mounts of this type require a screw to be tightened up to the bottom rail of the wall bracket. Because this tv was to be in a recessed box it made it impossible for me to get at the underside of the mount from behind the tv while the tv was hung on the wall. Having the spring loaded clips for the bottom rail and the hanging loops to release them was the perfect solution for my needs. The way the wall bracket is made, mounting and centering issues are extremely simple. Screwing the rails onto the back of the tv was even more simple. Hanging the tv was as simple as hooking the top on and gently swinging the bottom into place. Very audible clicks let me know the spring loaded clips had grabbed the bottom rail. That and the fact that the tv wouldn’t swing back out. I did a little test pull on the loops to release the bottom clips. Easy as pie. Nothing about this mount was difficult. I’m very pleased with it! Good quality as well. Sturdy. I’d buy it again and recommend it to anybody. I will say that because of my RV application, I had to purchase some hardware to install the bracket into the wood panel of the tv recess in the RV. No studs for me to find. Just a piece of 1/2” board. I say this because the mount came with an impressive amount of hardware for hanging. You’d be all set for a house. There were what looked like some 3” long 3/8” lag bolts included for securing into studs. At a glance I thought 3/8” anyway. It’s possible they may have been 1/4”. Regardless, much beefier than other hardware I have received with other mounts I have hung in my house. The whole thing made for a very flush mount. Check out some of the photos I posted below.

FANTASTIC!!! If you are in the market for a frame bracket to hang your flat screen TV, then look no further! I was very impressed how well thought out this wall mount is. I chose the one that mounts the TV flat onto the wall, with NO tilt, NO articulating arm, NOTHING. Just flat against the wall. ECHOGEAR does offer other models of wall mounts that provide these capabilities. Everything that you will need to mount your TV onto a wood frame wall with 2X4, or any 2X framing is included with the one I ordered. If you are going to mount this onto a concrete wall, or a masonry wall, then you will need to furnish the anchors yourself. I am not sure if ECHOGEAR offers them with anchors instead for a wood frame wall. The wall mount allows you to anchor onto a 16" or 24" on center wall framing. The wall mount consists of 2 main sections: the square frame that goes on the wall, and the 2 vertical pieces. The two vertical pieces you see, that have the straps on the bottom, are what bolt onto the back of your TV. This kit comes with all the different bolt sizes that most TV's have on them. My TV is a 65" Samsung LED TV. The kit also has some spacers that will allow you to place between the TV and the two vertical frame pieces that allow you to fur out or move the TV a little bit away from the wall. In addition, these spacers provide small clearance for the cords that connect to your TV. I did purchase a 6 piece HDMI kit that has different 90 degree elbows to turn down the cable, instead of coming straight out the back of the TV where this would introduce a clearance problem with the video cable would be interfering with the wall. Turning down the cable with a quick 90 degree connector solved this clearance problem for me. The rectangular frame piece is what bolts to the wall. The horizontal slots are what allow you to adjust the frame horizontally on your wall. Prior to any hole drilling or entry into the wall, I used a stud finder and a level to mark out the center of the studs and where the four holes will locate vertically and horizontally on the wall. The kit comes with four (4) 5/16" x 2 1/4" wood lag bolts and flat washers which I used after drilling a 3/16" pilot hole in the center of the wood studs. I then drove them into the wall with a 1/2" impact gun. Once the square section frame is fastened to the wall, and the 2 vertical pieces are fastened to your TV, you can hang TV. The straps are level to pull down the spring loaded clips that lock your TV onto the square frame. I was unsure about purchasing this frame and read the previous reviews with almost all 5 star ratings. I am very glad and happy that I purchased this wall mount kit. I think you will as well.

While this mount worked well for me, there are some limitations caused by the low price point. First, there is no provision for leveling after it is mounted to the wall, so you need to get it perfectly level when you mount it. This is a little bit trickier because the frame ships in two pieces, and has to be assembled before mounting to the wall. As a result, you can't really place your level along the full length of the frame, but only along the middle piece that holds them together. Given that my frame looked very slightly wonky when assembled, I wasn't entirely confident that the middle piece was perfectly level so I placed the vertical supports (the part that attaches to the TV) on the frame and then used the tops of those supports for leveling. It all worked out but would have been easier with a one piece frame or with leveling adjustments. Still, it does work well now that it is installed and the price is super reasonable.

Easy to mount and, don't tell anyone I had to but, easy to remount too. Perfect, simple design that's easy for DIYers and leaves you confident. If you're like me, you may be looking at the picture and going, "how will I mount the tv center on the wall if this thing goes straight into the studs, which aren't center?" But don't worry - for one thing, you can put the bolts into the studs into any one of the long spaces of the base. This allows you to mount that part of it slightly off-center to the studs, allowing you to center to the wall or furniture rather than just the space of the studs, depending on how wide apart yours are. Secondly, the bars that attach to the TV itself easily slide back and forth along the base affixed to the wall, which serves as a kind of rail, complete with safety stops to keep you from sliding right off. So in other words, you have a lot of "play" once you get the base mounted, and it's very easy to align the TV side to side after you've got it mounted. And boy, is this thing ever FLUSH. This is so close to the wall that I had to take the TV off to get my cables in. But once I did, it fits beautifully.

Great product. Very easy to use and install. I wanted to use this mount as part of a custom install where centering the TV was critical and I needed a very thin application. I was concerned at first about the bolt pattern fitting the 70" and trying to figure out where to set the brackets to best center the TV in the space but when I went to mount the brackets to the TV, there was only one option that worked. With that figured out, I just needed to figure out where to mount the wall bracket to get this where I wanted it and this was just a matter of taking a few careful measurements. This mount is VERY slim which is part of the reason I selected this one. Just know that it can be a challenge plugging in your cables afterward, you may need to hang the TV on the wall mount and tilt out the bottom to access the inputs and this may require a friend to give you an assist. I am very pleased with the result and am actually considering replacing my other mounts with this one.

I love this wall mount. Great price, very simple low profile fixed mount. Frame is well finished, no "ginsu" edges. Very substantial and sturdy, lots of mounting screws included for all kinds of different televisions and easy as can be to install. Latching pull strings are nice, made it easy to pull set off wall. Ran into a slight problem when centering the mount on wall. My TV is 70" using 400x400 vesa pattern with 16" center to center stud spacing. TV takes up virtually all available horizontal space on wall (61" 3/4 TV vs. ~64" wall) and so centering the mount perfectly was a major concern. Due to an unlucky stud configuration relative to center of wall it was not possible to mount in the center and horizontal slide action to compensate after TV was mounted came up a little over an inch short on allowing TV to be perfectly centered on wall. Still turned out great and TV does not extend past the wall edge so I'm a happy camper.. Just wish this mount was two inches wider.

Wall plugs for the screws weren't supplied, I had to buy them separately from a local shop. Also, one of the screw heads broke off when tightening, leaving the rest of the screw in the wall.

Excellent low profile, fixed TV mount. I mounted a 60" flat screen in our media room and it took me all of 30 minutes. Very solid and easy to mount TV once installed. Would highly recommend.

Very happy with item. Ordered 2 and both were easy to install. They give a very low profile look to the TV when mounted. If that's the look you're going for then I would totally recommend. Also, build quality was nice. Does not feel/seem cheap.

Easy to install and well made.

Product is good, easy to install, low profile. Came with all of the hardware. Negatives, the lower bracket release straps are too short when used with a larger TV. My 65 inch, I cant reach them without the assistance from a coat hanger. Shipping was 5 days later than expected and the box was partially destroyed.