CONDOR Pit-Stop/TrailerStop PS-1500

First off folks, this product, the Condor PS-1500 is everything they said it was and a heck of a lot more! The PS-1500's fit and finish, function, ease of assembly and use are a true 5+ Star all the way and it is "Made in the US of A" too! These guys, Condor Manufacturing and my Supply guys, Big Bad Power Supply are a Hot team. I ordered the PS-1500 from Amazon, best price out there, on Jan 8th 2013 and UPS dropped it on my door step Jan 10th 2013, talk about greased lightning being fast!! The packaging was as strong as the PS-1500 itself. I opened the box with ease, read the directions and assembled it all in about 10 minutes flat. Went so fast, didn't even have time for a beer! I have a full dress Yamaha Midnight Venture with extras, weighing in at about 1,000 lbs. + - and park it in my garage on a flat concrete surface. I laid the PS-1500 in position on the floor, adjusted the cradle to the second whole from the entry end, got my Yamahoppie and pushed it up onto the cradle and forward a touch past center with ease and cha-zam, locked into place solid and fast without hardly any wobble or side movement!! No tie downs required unless you have some spunky youngsters about, I don't, and want a little bit more safety. This puppy is as solid as a rock, function & design and I completely recommend this investment for every bike owner. My bike now takes up one third less room in the garage, makes it easer to clean, polish and maintain than when leaning over on it's kick stand. Should have gotten one of these 50 years ago and made life easer for sure and all those years the wife was picking on me about all the garage space I took up with my bikes, she now smiles and gives me a big wink, saying what a slow learner I am!! ;-) Great product by Condor, Made In The US of A by Americans and a Red Hot Supply Company "BIG Bad Power Sports" ta-boot... Talk about, "Win, Win, Win", this is it boys & girls. Stop looking and start buy-in! V/R Kent M Whitney, USN EOD/CB Very Retired, still riding and pushing 70, "Hot Dog"!

Not cheap but the Condor Pit-Stop is very well made and constructed. I have a V-Star 1300 Deluxe that weighs over 700 lbs and this wheel chock holds my motorcycle very securely. It does take a bit of effort to both roll the motorcycle onto and off of the wheel chock but I can do it solo with little difficulty. For reference I am nearly 70 years old and weigh less than 160 lbs. I do the roll on/roll off while seated astride the motorcycle as I feel much more in control than when standing beside the motorcycle. The stand allows me to check my oil and coolant levels plus it also lets me store my motorcycle parked straight up in my garage which gains some room. If your motorcycle does not have a center stand (like mine) the Condor Pit-Stop is a high quality solution that works very well. Highly recommend!

WOW! I should have bought this way earlier. I love this stand, setup was a breeze, rode my Harley SG CVO onto it, and it just locked in with no issues. Very good build quality with the materials used all around. No need to put your kickstand down, holds the bike firmly in place, and upright. Will definitely be telling all my friends to get one. Having the bike upright I was able to install my new saddle bag liners in a few minutes without any issues. I've ordered a lift as while one bike is on the lift, I can have one of the other bikes on this stand.

Works great for my 2025 HD Heritage and 2015 HD Dyna! I have tried several different wheel chock brands for my 6 bikes of various sizes and this one works the best for my heavier bikes. Granted I have never used it on a really heavy touring bike but would think it would do well with them as well. The Condor wheel chock appears to be identical to the Harley branded wheel chock they sell for $50 more. Probably is overkill for lighted bikes with thinner tires, but easy to get into and out of for larger wider tire bikes (without mounting to the floor), as long as you set it correctly for your bike. Directions could be more helpful in determining where to set the wheel chock for different tire sizes, but a little trial and error and you can get the chock set to the right position for your bike.

Exceeded expectation! Bike is 2025 HD Road Glide with trunk and full tank so about 900 lbs. Condor bought to store bike in home garage. Pit stop came completely assembled and only needed to raise the center piece; took maybe a minute to setup. Very solid build and supported bike with no effort and it looks great! Bike looked much better standing straight up than on jiffy stand. Easier to clean and detail. Hint for heavy bikes like HD I used the 3rd hold to perfectly load motorcycle for proper alignment with track.

This is one of those products that's worth every single penny. Don't be stupid like me and buy a cheap knock-off first, only to realize they're junk, and then buy the Condor. Just buy the Condor first and you'll be glad you did. This thing is built like a tank and will outlast me, my bike, and my garage. My bike rolled right into place on this stand like it was custom built just for me. The stand did NOT slide forward (like the cheap knock-off did). Great product. Built in the USA. Buy it, your bike will love you!

Takes literally 4-6 minutes to put together, if you can pull a few cotter pins. The package is heavy, so watch the back, and contains the device that just needs to be folded up and had the two rods installed. The front tire measurement (or rear) is offered within the instructions but be wary, they are way off imo. For example, the manual said that it would be holes 1 or 2 (closest to the vertical post) for my 2017 Street Bob. No, not even close. I am all the way back to hole #4 or two from the other end. So be careful with your bike. The reality is that this will hold your 650-1,000 pound bike straight, but you need to adjust based on your own gut feelings for safety. I would recommend finding a stud in the garage and a tie down just in case there is "failure" in the garage. The stand does not need to be drilled into your concrete but it does need to be watched. There is mild wobble, but less than your kick stand if hit. Considering the massive amount of weight the bikes endure on a single kick stand, this is a nice way to save your stand. I keep mine down just in cast and lean the bars to the left - you never know if it will fail. I have no idea what people are talking about when they say they can work on their bikes with this stand. Look at it, you get about 1" of lift, if that from the ground, even at the highest point. It really does not lift the bike more than 1/8"-1/4" off your kick stand. So do not think this is raising your bike 4" off the ground, that is not the case, not even remotely. So a heavy, good product for once, but again, holes will be what your rims and wheels allow - manual may not be right. Merely riding onto it requires a bit of getting used to but you can put it right up to the garage wall which is nice.

Works great for both my bikes, one is a 944 lb cruiser and the other smaller. It's easy to switch between the two by just moving the pin. I like how sturdy it feels and how it can be just free standing in the garage or you could attache it to the floor of a trailer if you needed to. Highly recommended if you need a bike chock, and anyone who works on their own bikes certainly does.

Quality isn't cheap. Perfect for holding bike. Leaves hands free to use rear Paddock stand.

Arrived very quickly after ordering. This thing is perfect for my trailer, shop and bike. I have a 2003 Harley Davidson Road King Classic and it fits like a glove! Very solid and sturdy and easy to use alone! The included (didn’t mention this on the Amazon sell page) makes it very simple to attach to the trailer but easily is removed keeping my trailer versatile for other uses! Excellent product!

I currently have it secured to my garage floor Unfortunately very difficult to remove bike from chock,I have to use 6”blocks to stand onto get enough height to push it out of the chock and use front brake to hold it and get back far enough out of chock I own a 2018 RG CVO Harley,so not a lite bike about 960 lbs

Top notch quality, what’s not to like? Holds my 2018 Kawasaki Z900RS SE on my flatbed utility trailer just perfect.

Bought 2 of these for securing our Harleys in our toy hauler 5th wheel. Just finished a 5000 km trip and they worked flawlessly.