Vetroo K1 Pangolin Mid-Tower ATX PC Gaming Case, Dual Tempered Glass, USB 3.0 I/O Panel High Airflow Computer Case Max 360mm Water Cooler Support (Fans are not Included)

I really like this case, upgraded from a NZXT H510 - CA-H510B-BR compact mid tower. System specs: Ryzen 9 5950x, Red Devin 6900xt, 1000w psu, I was struggling with my thermal temps. I have 4 120mm fans and a MSI 360 liquid cooler. The case itself is very easy to work with, panels remove making it easier to install fans and radiator. All in all, if you have a high wattage set up, this case is for you. Excellent airflow, and the fighter jet inspired design is very stylish. YES you'll still need to support your graphics card, but not as much. I added an LED bracket I found on Amazon. Excellent air flow, very well made. Very happy with this case..

The K1 case was exactly as I expected from the listing. The metal feels solid and well put together. Much larger case than my original Corsair case and as such, easier to install components. The cable management was the only part of this build that was a monster. Because both sides of the case are glass, you are going to have to spend much more time routing and securing cables than you would with a case that has a solid rear panel. Same thing for the PSU compartment which is also open and directly adjacent to the in front fans. This would be my only complaint. The design of this location for the PSU is a little cramped but again with patience and a modular PSU it can be installed and not look like a total rats nest. To aid in the cable management, as there are no attachment points for cables on the back of this case, highly recommend this kit https://www.amazon.com/dp/B08F77YVYB/ref=cm_sw_r_apan_glt_i_dl_TEFNDZCCBHVWM49MR18T?_encoding=UTF8&psc=1. The adhesive tie downs give you custom attachment points where you need them and make the task of running those wires less of pain.

I do like the uniqueness of this case. I have built 100s of PCs in the last 25 years and this is a good looking case but definitely not the easiest one to use and pricey, for that price it could have came with fans. The cons I have are not a big deal because it's something you only have to deal with once or very rarely. What matters is my wife loves it and it happy with the way it looks. I just wanted to point out if you're fine with the many minor cons it's still not a bad case to have. Pros -Looks good, lots of room for fans -Easy to assemble the side panels -Lots of air flow. -The tilt down is neat change -The front connection cables are long Cons -I don't like that I have take the side panel off to get to the PS. -I don't like I only had room for one SATA drive, I did mostly use M.2's but still... -I don't like how the side you button up with wires is clear as well, I'd prefer a better way to hide that. Perhaps a metal plate to cover it all up, could even put mounting holes on it for additional RBGs, because after all RBGs make your gaming rig go BRRRRRRRRRRR. -Taking inside panels off to mount the fans could have been easier -Would be nice if you could have removed the fins, instead of they are riveted on. If that was an option they could have shipped me a new fin to replaced the damaged one. which leads me too... -shipping box is rather poor design, there isn't good protection on top for the fins which lead to damage from shipping and had to send it back and wait another week to get a replacement leading to having to wait another week just to build my computer

Everything about this case is cool. With the exception of the PSU mounting point and cable water radiator placement. Since my radiator is front mounted 3 fan TT the all the PSU cables rub the fans. It's extremely tight. PSU mounts in a ridiculous position to begin with. Fix for this is simple. Since I'm running a ATX motherboard. I have to move the PSU a inch and a half forward drill a new mounting point that still allows air to flow for the fan. Purchase cable extensions the ones that come with whatever PSU to buy aren't going to be enough. 50cm extensions what your gonna need no way around that. Otherwise is visually stunning to look at and it was fun project.

All around feels like a sturdy high quality case for its money, it looks much cooler than I was expecting in person, but using the diagram in one of the pictures showing 18.9inches tall 15.1inches long and 8inches wide I thought it was gonna be smaller, turns out those measurements are wrong, THE CORRECT MEASUREMENTS are about 22inches tall, 24inches long (front to back) and 9 1/2 inches wide with the glass on.

This is an open platform, and I have to say for it being open, the dust collection was minimal! And maximum airflow.l With 7 fans you can install and room for a 2 fan AIO. I ran a 4090 with a mid ATX and still had room. The wite management on this thing would be my only draw back since their was not much cover or many areas to line up wires. Overall very happy

This case looks amazing however it is very poorly built, to the point where the glass holes do not align with the case itself. The case is very flimsy warping with the slightest of effort. The cable management is barely existent. You can't use 360 AIOs because the pump would be much higher than the radiator, which would reduce the AIOs lifespan. All of this for the very high price of $160, and there are way better cases for that price. I mainly bought this because I wanted something unique, guess I found out why it was so unique.

I love this case. I wanted something different than traditional box. Cable management is tricky so be creative. Not really radiator friendly but it don't really need it cause it is open case. I loved building in this case. The only complaint is the rubber stand offs for the glass don't like to stay on so I glued them on. The case is very sturdy and can handle lots of components to fill it up.

I love the look of this case but it did have a few issues I needed to overcome to get the system built. This is not a list of complaints, more if a list of the ga to know before starting your build. 1. The from fans are open and if you drop a USB stick when plugging it into the front IO you will trash the fan that it falls into.. so I bought some PC fan filter screent to cover them, magnetic worked beat. 2. The power supply cables come out into the bottom front fan from behind so you need tight cable management. 3. There is no cable management built in and with both sides being glass you need a ton of zip ties toanage the cables properly. 4. There is no room for a water AIO cooler. I but a 2 fan one in and had to Dremel off the corners of both fans closest to the motherboard as they covered connectors, this case was designed for air cooling only.

Not everyone's cup.of tea but I'm a coffee drinker anyway the tower seems good quality was well packaged and was delivered without any issues not built the pc yet but hopefully soon

奇抜なデザインだけど高級感がある。配線も取り回しがしやすく、組みやすい造り。一ヶ月で三倍以上の販売価格になっているのは正直驚きました。

高校生の息子と一緒に作成、自作PC教材として購入 通常のケースと違い、右側面の配線を隠せるスペースがほぼ皆無なので、ケーブルマネジメント必須 親切設計では無いので、初めて自作する人には勧めにくいが、どうしてもド派手に光るゲーミングマシンを組んでみたいと言う人ならオススメ。 傾斜したフォルムで斜めレイアウトにガラスのサイドパネルなので、中身をカッコよく魅せられます。 フレームも金属製で高級感アリ。 自分はCPUはi5-12600kで低発熱ですが、このケースに合わせて、液晶モニター付簡易水冷ROG龍神Ⅱをチョイス。 アニメーション表示で各種ステータスも見えて満足 半オープンフレームのようなケースなので、RTX3090の温度も50度台をキープ、冷却性も悪くないです。 プラスでアマゾンでかっこよさげなスペアナをビルトイン、部屋に転がってたLEDテキストケースファンを装着、いかにもなゲーミングPCですが、大満足です

オープンケースで作業性はそこまで悪くないのですが、説明書がない為初心者では厳しいと思います。 今回のレビューで私が星2を付けたのには3つ理由があります。 1.ケース本体のサイズ精度が非常に低く、画像の通りバックパネルを取り付けると端子類の抜き差しが出来なくなる事。 2.アルミのフレームの部分が薄っぺらく、ちょっとした事で変形すると思われる。 全体的に研磨や面取りが甘く、品質が良くない。 3.こちらは私にも非があるのですが、住所を引越し前ので頼んでしまったのでキャンセルして住所変更しようとしたのですが、注文して20分しか経っていないのにも関わらずキャンセル不可の通知が来ました。 その後何度かAmazonを通してキャンセル申請したのですが何れも無視され、注文から6時間後位に発送通知が届きました。 確認不足の私も悪いですか余りに酷い対応だと思います。 不良品の為返品依頼しておりますが、こちらも無視されそうで不安です。(後日返品結果を追記します。) 問題無く返品完了しました。