FIDECO USB 3.0 to SATA or IDE Adapter, Hard Drive Adapter Cable Universal for 2.5/3.5 inch SATA HDD/SSD & IDE HDD with 12V Power Adapter

The adapter works as advertised. Got access to 3 of 5 old drives, 2 were no longer functioning. I verified this by connecting them to an old PC. The access time even on a very old drive was reasonably fast on a USB 3.2 port. I was even able to install and run Linux Mint on one of them and it seamed faster than the older PC's access time. I like that the wires in the 4 pin molex power connector have been epoxied or glued in place it provides a much sturdier feel to to the plug. I also like that the USB cable is removable. Though the selection to use a 2 sided USB A type cord leaves me scratching my head. Why in 2024 is this being sold without a USB C port, and I think this is my only issue with this USB to IDE, 2.5 IDE, and SATA connector. The USB C cord is about 3-feet or one meter. It feels of a reasonable quality. And the additional power supply wall wart has about 6-feet or two meter of cord. And has an output of 12 volts at 3000ma, Though the issue with IDE drives are different jumper settings that may need to be set or changed. This device or any other one cannot magically make a old broken drive, or one with the jumpers not set properly work.

I've got some old 3.5 inch IDE hard drives and SATA 3.5 inch hard drives from old potato computers, and this reader was able to read all of them without issues. It also works with 2.5 inch SATA SSD. It is plug and play. Other than a power outlet and an USB port on a computer, you don't need anything else since there is no driver to install

Works great. I have not had to work on an IDE hard drive in years. I used this to get data off an old hard drive and it worked great.

I have had this for a few weeks now. I would gibe a 5 star but I am waiting to see if it goes bad in a few months. I am currently using this for my xbox one's eternal hdd memory from old drives I've taken out of old computers. I'm happy to tell you the connection is very nice and snug for all the connectors, and firm fitting aswell. There is no problems to report. I have basically been running it for 16 plus hours a day depending if I forget to turn it off or not. So it's being used a lot right now. Oh and the only downside is the drive is exposed but it really doesn't matter unless you let dust collect on it. I will return to raise or lower my rating in a few months. I hope this was helpful to someone!

Plug and play. Easy to use. Used on SATA/IDE HDs from 10+ years ago. Was able to to save pics/documents. No additional hardware or software was needed. Satisfied with purchase.

Im an old computer person & always had used hard drives laying around & having to hook up or un hook the hard drives to a pc in order to read what was on the hard drive. Real pain in the neck. Came across some old pc hard drives with no idea what was on them & didn't want to drag out the old pc just to see what stuff was on them so...thought hey maybe technology has improved in this specific field. My go to is always amazon for ideas like this & i was blown away seriously by the products available to complete something in minutes that used to take a half hour to accomplish! Great tech leap & very inexpensive & easy to obtain peice of equipment.

Both SATA and IDE worked with no issues.

This unit is supposed to allow one to connect IDE/PATA and SATA drives to to a computer. It does. I have been unable to connect my DVD drive to my M4 MAC Mini. My Sabrent dock works fine with SATA SSDs and HDDs, but not the DVD. This guy works great! I appreciate the little power switch that lets me turn the drive off. Hook it up, it works.

El producto la verdad me sorprendió bastante, el precio/calidad es super bueno, muy funcional. La verdad esperaba mucho menos y realmente hasta el empaque super bien, por ahora lo prove con un sata 2.5 y va de maravilla sin tanto rollo. Solo debería poner algún disipador al disco ya que si se calientan bastante.

Doesn’t work

Muy buen producto, sencillo de utilizar.

Lo compre para clonar un solo disco y jamas lo he vuelto a utilizar. Funciona como se espera. Mejor tenerlo y no necesitarlo que necesitarlo y no tenerlo.

Funciona muy bien, solo la lectura de información es algo lenta