General Tools UV512C Digital Ultraviolet UVC Light Meter, 220 to 270 nM

I had cataracts and got a lens called LAL+. These are adjustable after you get LAL lenses put in. The problem is that they make you wear UV400 certified glasses until you get the vision updates locked in. This meter is perfect for measuring your glasses and for measuring your environment. The UV frequency you have to avoid with the LAL lenses is between 200 and 400 NM. Specifically 165NM. This meter makes life easy. Great price. With this meter you can buy any UV400 certified pair of glasses and make sure they meet spec.

I like this digital UV meter because it lets me know how strong UV light will be from many sources. For example, somebody says the halogen light at your desk has very strong UV. After I bought this meter, I measured UV light from halogen bulb, CFL bulb, LED light bulb, incandescent light bulb at home and know exactly how much UV light emitted from them with compared to the UV light from the Sun. In this way, I can avoid the source that emits very strong UV light. This meter was built very well. It comes with a hard case although the hard case was not shown in the picture. The wand in this meter need a simple assembly by using five supplied screws but it is very easy. The measurement is very sensitive and the sampling rate seems high because I can see the measured value changes very quickly. It totally met my expectations so I give 5 stars.

This item works very well and accurately.

Needing to test various UV light sources, I purchased the General Tool UV513AB Digital UVAB Meter to provide a greater level of accuracy and precision than a personal UV meter intended for consumers. While I have generally been content with this instrument, the name of the meter is a bit of a misnomer as it is truly a UVA meter calibrated for 365nm, which is well outside the UVB range. Sensitivity drops off significantly in a somewhat asymmetric distribution about 365nm, reaching zero % sensitivity at 280nm and 420nm. An important UVB wavelength - 308 nm - has a spectral sensitivity of only 30%. There is no setting, adjustment or filter to obtain a better measurement of UVB wavelengths. It is some difficult to objectively review and rate such a device because its well and not-so-well understood limitations can be attributed to its modest price. Other laboratory grade UV meters can cost more than three times as much and beyond. So, it is the value and utility that must be discussed. Compared to a personal UV meter such as the Oregon Scientific EB612 Personal UV Monitor, this instrument is quite a powerful tool that is easily worth five times as much. The General Tool UV513AB allows for real time UV measurements in a value that can be interpreted on an absolute scale in universal metrics of mw/cm^2 - not an ambiguous continuum meaningful only to the instrument such as relative intensity of 1 - 20. This is especially helpful when observing the output of UV LEDs whose output can vary based on temperature. There are some deficits that are inexcusable, even at its low price point. Despite being a relatively simple device, the menu navigation is oddly confusing. The manufacturer should have added an additional button or switch to avoid the need to cycle through different functions. It is nice, however, that there are two readouts, including one that is able to show min, max, and average values. The meter also has a data store capability that can be displayed on the secondary reading while the main function is still being displayed. The manual for this meter is poorly written. One of my big concerns is that at least one of the specifications is incorrect. The "High Illumination" spectral range is listed at 0.01 mw/cm^2 to 40.00 mw/cm^2. Yet, I have exceeded 40 mw/cm^2 numerous times, reaching up to 66 mw/cm^2. Given that an almost identical meter is sold by Sper Scientific, my guess is that General Instrument didn't make or design this product. Hence, the manual was probably written by someone else other than the designer or manufacturer. Regarding the fundamental capabilities of the sensor, the 40 mw/cm^2 maximum value is well below the output of many light sources, including UV lasers and high brightness LED modules. Just for reference, readings of greater than 8.5 mw/cm^2 can be reached at the sun's maximum intensity during the day in the Midwestern United States. Like the wavelength sensitivity limitation, the maximum intensity ceiling could be addressed with different filters, which can often be extremely expensive. It would be helpful if General Tool could provide easily attachable and modestly priced filters including bandpass variants to address the wavelength and max intensity issues. Despite all of the limitations, this instrument is a good value - especially when compared to what is offered in the larger scientific instrument market. For example, a small bandpass UV filter used to obtain a better reading on a specific UVB wavelength could cost several hundred dollars from a supplier such as Edmunds Scientific. I would have appreciated a few additional capabilities but the price would be expected to increase dramatically. That being said, this instrument is a solid four stars compared to what is available at both lower and higher price points. Pros Inexpensive Flexible sensor mounting/use with wand High level of precision in the microwatts and reported accuracy of 4% Portable Easy to understanding readings Min, max, average readings with data store Cons Poorly written manual Complex function navigation

A great tool for those with sun photosensitivity. The absolute numbers on the scale mean little to me, but that is no problem; comparing direct light levels at high noon vs. afternoon vs. first light, through a car windshield and a car side window, through home windows, etc. to know how much relative UV is in each situation is very helpful!

General Tools UV513AB Digital UVC Meter, 280-400 nm [THIS IS COPIED FROM THE ITEM DESCRIPTION] I will return this item since the description of the item (copied and pasted above from the Amazon.com website today April 25, 2018 (also see a photo of the website description) does not match the item I received (see photos of item description on the packaging of the device received). There is a deceptive variance! As a novice to measuring UVA, UVB, and UVC, I read the description of the item on Amazon.com as a “UVC Meter.“ Perhaps others might fall for this description as I did. Most of us, I think, would believe that if something says it is a “UVC Meter” then that it means it is a UVC Meter. The item received is only for UVA and UVB measurements. VERY DECEPTIVE. How a seller can say that the item I received is a “UVC Meter“ is beyond comprehension and inexcusable! It seems like the description could be perceived as fraud, no? In case another person is interested, Wikipedia says that UVA spans the wavelength of 315-400 nm. UVB spans the wavelength of 280-325 nm. This item, therefore will measure both UVA and UVB from 280 to 400 nm. I take it from other reviews that separation of UVA measurements from UVB measurements may not be possible. Check on that if it is important. According to Wikipedia, UVC is measured at 100-280 nm, clearly well outside the capabilities of this item as described in its packaging.

This tester has saved me many hundreds of dollars in UV bulbs. It's recommended to change reptile bulbs every 6 months. This meter tells me exactly how much UV my bulbs are making. Most (not all) Zoo med bulbs, in particular, continue to produce acceptable amounts after more than a year of 12-hour days. My reptiles and my wallet are happy. Thank you!

Some of UVA (and UVB) wavelengths are not covered. (Sensitive to some of UVA and some of UVB spectrum) Hopefully remaining coverage could be a reliable proxy. FIELD TESTS: I have tested sensor with regular transparent glass: value dropped by 35% or so. When testing various glasses with UV protection, value dropped 98%. Testing window light with some kind of film (came from the builder), value dropped 60-70%. Since negative control (regular non UVA-blocking glass) did not drop value of UV to 0, this device may be used reliably to aproximate UVA/UVB protection for glasses; measure UV levels indoors.

bought it for sun protection measures. no problem with it so far. easy to use.

Arrived broken. Had to fix by flipping module and switching battery polarity. Works ok now. Limit is 10000uW/cm which is lower than that given off by the sun on a bright day.

The claims online and on the box say 280-400nm, while the provided paperwork states only 290-370nm.

All good