RC-N3 N2 N1 N1C Remote Controller 4.7-13 Inch Tablet Holder Mount for DJI Flip,Neo,Air 3S/3/2S/2,Mavic 3 Classic,Mini 4K/5/4 Pro/3/2/2 SE Drone,Extended Control Phone Clip with Lanyard

I’ve tried a couple of tablet holders before and they always felt a little off. This one is different. I’m using it with a stripped-down Samsung Galaxy Tab S6 Lite that I keep dedicated as a monitor, and it works really well. What stood out right away is how it mounts. Instead of putting pressure on the antenna arms, it clips onto the body of the controller. It snaps in clean, goes on easy, and comes off just as easy. Once it’s on, it feels solid and doesn’t shift around while flying. I’m running this setup on my DJI Air 3S with the standard DJI controller, and everything lines up the way it should. The tablet sits in a natural viewing position, which makes it easier to see what’s going on compared to using a phone. The added weight is noticeable after a few batteries, but that’s coming from the tablet, not the mount itself. By the third or fourth flight, you start to feel it in your hands. The included lanyard helps a lot with that. It takes the load off and makes longer sessions more comfortable. Pros: Clips to the controller body, not antenna arms Easy on and off Holds tablet steady without shifting Works well with Galaxy Tab S6 Lite Lanyard included and useful Cons: The tablet adds noticeable weight during longer sessions Summary: This is the first tablet mount I’ve used that didn’t feel awkward or forced. The clip design makes a big difference. It’s been a solid setup for my Air 3S, and I’d buy it again.

Works perfectly! Easy to use and very good construction

After extensively using the Hanatora RC-N1 N2 Remote Controller Tablet Holder with my DJI Mini 2 controller and iPad Mini, I am thoroughly impressed with its performance and build quality. This holder is an excellent addition for anyone looking to expand their drone's remote capabilities by using a larger screen. The holder is easy to install, with a secure and adjustable grip, accommodating the iPad Mini perfectly without any wobble or strain. It provides a solid connection and remains stable even during long flights, ensuring that the iPad doesn’t slip out, adding confidence while operating the drone. The build quality of the Hanatora holder is commendable, featuring a durable and lightweight design. It does not add unnecessary weight to the controller, maintaining comfort and reducing hand fatigue during prolonged use. The adjustable angle is also a notable feature, allowing for optimal screen viewing, which is crucial when flying in different light conditions. The Hanatora Tablet Holder has certainly improved my overall flight experience with the DJI Mini 2, offering better control and an enhanced view of the drone’s surroundings. It has proved to be a reliable and beneficial accessory for both casual and professional drone pilots, making it easier to navigate and control the drone with precision. I would highly recommend the Hanatora RC-N1 N2 Remote Controller 4.7-12.9 Inch Tablet Holder to any DJI Mini 2 users looking to upgrade their setup. It is a top-quality accessory that provides value, reliability, and a superior user experience. This holder has certainly met and exceeded my expectations, earning a well-deserved five-star rating!

FIT: It snaps right into place and stays there. Form and function of the controller are not affected at all. 100% designed for it and nicely done. FEEL: Very well balanced with a Samsung Active3 8" screen in front of the sticks, not above them... just as it should be. FUNCTION: The device clamp is spring actuated and not an active locking screw so smaller tabs like mine will fall out. I added a heavy rubber band and I'm 99% confident that it's not going anywhere. As for the joints being tight... Yes, they're tight. They should be tight. You want them to be tight. They will fatigue and loosen a little bit every time it's folded so don't screw with it. Find your spot and leave it like that if you can. I can't see any way to tighten them back up when they do become sloppy but I don't expect that to happen soon. Maybe 2 seasons of steady use before it becomes an issue and when it does become an issue I would buy this one again or glue the joints where I want them. I give this rig the double Fonzie.

Good sturdy product, fit my phone great! The price was right and I never worried about my phone falling out of it! Very secure. Would def recommend

Very sturdy, stiff, and stable, even with a fairly large Galaxy Tab S6 Lite tablet in a bulky case. Comes with a neck strap and convenient loops to clip it to. One reviewer found that the strap interfered with the control sticks, but I have not had any problem with that. I also tried a simple hook that extends the phone clamp to hold the tablet against the front edge of the controller, as opposed to this one that positions it more over the control sticks. The hook style makes the controller more unbalanced; you have to strain to hold the tablet up, and you can't shift your hands for better leverage because you need to work the control sticks. The hook style is compact and fits in the DJI carrying case, while this one is too bulky to fit in it if you are also carrying the DJI 3-battery charger/power bank that comes with the fly-more combo. But in the end, I'll put up with having to carry the tablet holder separately (in the nice cloth drawstring bag it comes with) in exchange for a more comfortable flying experience.

I use a fold and this let's me open my phone up and use the larger screen and what a difference. The adapter is super easy to put on and take off and is solid as a rock. Phone stays in the cradle and doesnt move at all.

This is the PERFECT mount for a Z Fold phone on a DJI Remote. The mounting method to the DJI remote is solid, and simple. It mounts to the actual body of the remote instead of the slide out spring loaded antenna/phone holder like many others do. I had an extension type tablet holder that was simple to install, but it was too short for the Z fold and would push the power and volume buttons on the edge of the phone. This holder is easy to attach and remove from the DJI Remote. The phone clamp is the perfect size and shape for the Z fold. The spring holds the phone tight, but not too tight. The phone holding clamp can be turned 90 degrees to hold the non-folding edges of the phone, which lines up well with the speaker holes and the USB-C connection, leaving the volume and power buttons reachable at the top making it easy to change the volume on your phone and to unlock it with the power/fingerprint reader if you set it down. If you adjust the holder right, it will balance well enough to set the remote down with the Z Fold attached without worry of it falling over. Out of the box all of the adjustment joints on the holder are super tight. I would be careful adjusting them, the entire thing is plastic except for part of the joints that are metal. You probably can adjust the tightness, there are some nice solid star screws, but I'm just putting it in one position and leaving it there. An awesome deal for the current price I paid ($22). I'm sure this would work great for an iPad mini. It might be a little tight for anything 10inchs or larger.