15 PCS Setup Blocks

Total quality at a great price. If you are looking to buy a set of setup blocks for your woodworking needs, and I highly recommend you do, you have two main choices on Amazon; these red setup blocks by EANOSIC or the blue iGaging setup blocks. I strongly recommend the EANOSIC blocks over the iGaging blocks for the following reasons: I first ordered the iGaging setup blocks for $70 dollars and, although very accurate, the finish was blotchy and several blocks appeared stained or blemished. The color varied greatly from block to block, with some being a deep blue while others were much lighter. Additionally, the set I received had two 3/32" blocks and no 1/4" block; which led me to believe there was no quality control going on at the factory prior to shipping. I used them for a while but ended up giving them away. Next, I ordered a set of the red blocks from EANOSIC for $60 ($10 dollars less then iGaging), and to say I'm pleased with them is an understatement. Both come with a good case that holds the bars in place; however, the EANOSIC case has a larger, more secure latch, making it much easier to open and close. The finish on the EANOSIC blocks is a beautiful uniform bright red color with deep clear white lettering, and they are much easier to read then the blue iGaging blocks. I checked the tolerances with my caliper and they are very accurate for woodworking needs (as were the iGaging blocks). The main feature I absolutely love are the up-and-down arrows on every block (except the two smallest - not enough room), which allows you to instantly know what side to lay down on the table or tool, thus eliminating any chance of an incorrect setup. This feature alone made choosing the EANOSIC setup blocks over the iGaging blocks a no-brainer for me. Setup blocks are a game changer for any new or seasoned woodworker, and are the easiest way to ensure perfect accuracy when setting up your table saw blade or router bit height, or even measuring dado or rabbet depths. You may think you will only use them occasionally, but now that I own a set I find myself reaching for them all the time, and I keep coming up with new ways to use them. GREAT product, thanks EANOSIC.

Very nice kit of setup blocks. A comprehensive set including 1/16" to 3/4" blocks and also plywood dimension blocks. The 1x2x3 block is interesting but probably will not see much action. Lettering is large and easy to see and the anodized red backgrounds are finely done. You get a lot for your money with this kit.

Setup blocks will change your life if you've never used them. The number of things you will use them for will continue to grow. These are well built in a nice foam-lined case with silk screened labels that can take a hit. You won't feel like making Tik-Tok videos with these since they are aluminum, so if showing off your beautiful tools is really important to you then go spend $145 at Woodpeckers for the brass ones. For the working men and women of the world with actual stuff to do, the value proposition here is welcome. Pull the trigger!

Been using these for about a year with no issues. Really makes it easy to get the exact measurements. Setting up table saw, router table they just come in very handy. Made of good solid material, easy to read only thing to be careful is when there around metal they do get scratches.

They are nice... however, not perfect. Less than half were on the money, size wise... the others were btwn .003 and .007 out. For woodworking, that's probably close enough which is why I gave it 4 and not 5 stars. With a little more attention to detail, there's no reason they aren't ALL exact. Instead this company decided.... close enough.

These are dead on balls accurate. I was skeptical of this brand producing high quality machined material, but every block I checked with an my calipers was perfect. I was using a plunge router and needed to plunge 7/16 into a work piece, so I put together a 3/8 and a 1/16 block, not knowing that there was a 7/16 block. I checked the two setup blocks and the depth of the cut with my calipers, and both were perfectly 7/16. Then I saw there was a 7/16 block and measured that and it was identical with the same degree of accuracy. The 1/8 block matches the width of my table saw blade perfectly, which aids in making extremely tight cross laps. I'm always very happy when I get a chance to use these

Never used setup blocks before in my decades of woodworking. Thought I’d give it a try as I’m getting more serious and taking on more challenges. It’s made setting up for my three routers and table saw easier and quicker. It’s gone from a bottom drawer to the top drawer with my other layout tools. I really appreciate the storage box for its functionality and slim design. I can find the correct block quickly and makes setting up accurate and quick. There are much more expensive setup blocks than these but for my money why pay more? I suppose some people need metric and others imperial but 3/8 of an inch is 3/8 of an inch as 50mm is 50mm, so why pay more?

I wasn't sure what to expect with these blocks but was pleasantly surprised. The plastic case is decent. I think it would probably keep locked if dropped. Although it would probably crack. The surface finish on the blocks is nice with no visible machining marks. The anodized finish is nice and consistent. The laser marking is sharp. Best of all these blocks are very accurate. As measured with a decent set of digital calipers, most of the blocks were dead-on for thickness. The biggest deviation was below .001" which starts to get close to the accuracy of my measuring device. For the light setup work that I plan on using these for, I think these will work great. Being aluminum, I suspect they won't hold up to heavy use and abuse, but at this price, you aren't paying for that.

I purchased this set 4 months ago and now wish I'd got one years ago. There are a lot of similar and less expensive options out there but after much reviewing, the Eanosic appeared to have the best reviews at a reasonable price. These blocks did not disapoint; all are 100% accurate fractionally and within a few thou digitally. Perfect for my needs with my wood working hobby. If you need greater accuracy I would suggest that you should expect to pay much more. Can't say how much I like these blocks. I keep finding more and more uses for them (not unexpected), saving me time, making set ups way easier, faster and generally improving my work. Highly recommend and certainly worth paying extra for the 15 piece set.

I never give an almost perfect rating, but these are worth so far. I was debating between these Eanosic and 3 other brands, the Easonic price compared to the others seemed more than fair to me. And the amount of positive reviews on the Easonic made me pull the plug on these and I couldn't be happier! Great quality at a great price. I recently started getting better tools after going the cheap route and having inconsistent results. So it was time I got proper setup tools. If you're looking to buy a set of setup blocks for your woodworking projects, to setup your router, table saw and step up game, I highly recommend you grab these over the others. As I mentioned above, I was looking at 4 brands on Amazon; the Eanosic, Igaging, Kreg and a "no name" model that looks very similar to the EANOSIC but priced lower. They come in a great hardshell case for proper protection and storage, I just wish it was shipped in a box with some protection and not only a thin Amazon bubble envelope... that's my only negative on this, the shipping material. Easonic/Amazon please use something that offers a little more protection on these type of products, I had 2 blocs out of their foam positions. I used my Wen digital caliper to check if they are accurate or not, and they are spot on til' the break a dawn! No complaints here, see the attached pics. For my needs and level of accuracy for the projects I will be doing, these are a great bang for the buck! If you need machiniste accuracy, you might want to look for something else tha will also have the price tag that goes with it... You can't get a Porsche at the price of a Honda Civic! Buy these with confidence, I wish I would have ordered these before xmas when I was looking into them.

I use these all the time for setting up different tools in my shop. They are accurate and the quality is fine.

Nice case. Clear markings, although it is on the surface. Not sure how well it will hold up over time.