Outus 30 Pieces 2.6 x 0.8 x0.1 Inch Silicone Thermal Pad Reusable CPU SSD Thermal Conductive Silicone Pad Each Thick for Gpu Heatsink CPU Chip Heat Conduction or LED Heat Conduction(Light Blue)

Great thermal pads ive used for the last 3 years on basically everything ive redone or own. They will get the job done for pretty much any use that requires a thermal pad. Comes with a couple different thickness make sure you use the same EXACT thickness pad as using th wrong size and lead to catostrophic failures. Great fitment and perfect size for chips and nvme SSDs. Highly durable after 3 years of use and very easy to install.

worked for my RX 6600 strong, sticky and fresh. easy to install and compatible with a lot of lengths strong ish rips easier then normal.

Just used this on my 2015 Prius electric water pump heat exchange. I opened the replacement and it has a pre-existing thermal pad in two areas of the board. I opted to cover the entire board to make it more efficient obviously avoiding any soldered leads as not to cause a short. Should work as I imagine it to. I stacked several layers to conform to the shell mold making up for certain highs and lows for maximum heat displacement. We'll see if it works. Regardless, I'm going to look for other ways to use this Jello type thermal pad on my other R&D projects.

This is my short review of these thermal pads, for the price you paid and you get 30 pcs is a plus, the only thing that I gave this 4 stars is the thickness they are not uniform, some are thin and others are thick not sure if they intentionally done this but overall if just using these for ordinary use this one is recommended.

Good product

Got these, as 6W/mK (lower thermal conductivity), initially to do a thermal mod on a Dell XPS15 9570 laptop. The lower conductivity keeps the processor from heating up the VRMs via the case. They work great so far. I've also used them to do an XPS13 9370 as well as an RX580 graphics card, in all cases using Thermal Grizzly Kryonaut on the CPU/GPU die itself. It's nice to have the different thicknesses, and they're sized to fit an M.2 SSD without cutting. Easy to cut to suit other needs. One side has a stiffer clear backing, while the other has a more flexible translucent one, but it doesn't seem like there's a difference between the sides of the actual thermal pad. I'd recommend peeling the stiff side first before applying, then press/rub before peeling the flexible side: if you do the reverse order it seems more likely to come unstuck. Haven't done serious measurements, or long term endurance testing to see if they break down and get oily early, but they seem to do their job well. If you need moderate thermal conductivity thermal pads, I would recommend this assortment!

Not tried them out yet but i wanted something i could roll up into a ball and these versus paste is what i hoped for and this might do the trick. Yes 3 or 4 thicknesses. Can stack them up for higher fatter tolerances if needed. These are the grey colored ones. Sticky gooey putty.

Got these to address the thermal throttling on the new Apple MacBook Neo's. Just know if you going to use to this with the MacBook Neo the 2.6x0.8x0.1 doesn't 100% cover the logic board but two of these pads covers about 80%. These thermal pads easy to handle, easy to cut to size and does the job! It is sticky on both sides of the thermal pad so be sure to remove the film before applying.

Goed

Good price ! Excellent quality !

Nutze die für die NVMe als Wärmeleitpad. Können aber auch zurecht geschnitten werden und für andere Bauteile (z.B. am PI) verwendet werden.

un produit simple mais qui fais son taff

I bought these as they were cheap and I wanted to fool around with some old hardware. Low and behold, I actually found them incredibly useful! They come in various sizes in the pack (Thickness) so you are bound to find some that work. This coupled with some new thermal paste dropped a new GPU temp by near 30C, on the core and over 30C on the memory modules (which had no thermal pads on and no contact with the heatsink before I put on thermal pads) Overall, I found them to do the job bloody well. I bought 2 different brands and both performed very well. and I tested both on the GPU and they performed similarly. This Grey model feels a bit firmer and were generally more rigid