(2 in 1) Tempered Glass Screen Protector + HD Clear Crystal PET Screen Protective Filter Compatible with 3DS XL/New 3DS XL

The tempered glass for the top screen is perfect, nice smooth edge, no bubbles, perfect clarity. And it was easy enough to me to apply, you should be good as long as you're careful and precise, and you're in a clean environment, I wouldn't apply screen protectors with long sleeves on, don't want any tiny amount of lint or dust flying off between when you clean the screen and apply the protector. The PET film didn't hinder use of the resistive touchscreen and it feels good to use the stylus on, but I do have some bubbles, though I can't exactly fault the protector for that as I dumbly used a paperclip as a stylus years ago gouging the screen, so that is probably why I have a couple bubbles and I really just got this to cover it up and make it feel smooth to use a proper stylus on again, which it does perfectly. I've actually had this applied for a few years now, not constant use y'know it is still a 3DS after all, but I will say, the protectors have held up perfectly. For the money, this is a perfect value I'd say, even though it's price has gone up a bit since bought it, still $15 is totally fair for two custom screen protectors for an older device like the 3DS XL which certainly doesn't have the economies of scale nowadays of something like an iPhone 17 screen protector which'll sell a lot more.

So since the Hori screen protectors have been discontinued, I've been looking for a good substitute. I want to clear the air about these because I think some of the negative reviews here are a bit misinformed. First, this is for the New 3DS XL screens. It won't fit other models. Second, the condition of your screens makes a big difference in how ANY screen protector goes on, including these. New or near mint screens like mine that have been cleaned are going to be easier because nothing will get trapped under there. Third, the bottom screen protector IS a little smaller than the screen, as I see some people saying. This is a GOOD thing. If you look at the touch screen, it's sunken in with like a raised edge, see that? If the protector was cut perfectly, you'd never be able to get it off because of that edge. The top protector is cut to size because it doesn't have that edge. Having said that, if you line up the bottom protector with any of the sides of the screen, the opposite side will have a noticeable gap, probably 2mm. What you want to do is carefully lay it down so that you split the difference and have a little gap on all sides. You won't notice it while playing and you can pull the protector off if you need to. This is easily the hardest part of applying this screen protector, but I don't know if it would be different with any other brand. As for air bubbles and application, I used the cleaning supplies included and took my time. Both screens went on easily with only one small bubble each. Both of those bubbles disappeared after a little while. Just rub them out towards the edges of the screen. Overall, this is a really good product if you take your time. They include two sets of protectors in case you mess up, which is great. My only real criticism is that this set absolutely REQUIRES a good microfiber cloth to clean the screens, get rid of dust, and wipe off the cleaning solution. It's a big oversight that they didn't include one, so you just have to use your own. That's my only gripe.

I used the advice of many previous users and personally, I had no issues applying my screen protector. I put them on my 3ds in a steamy bathroom and tape to align and it came out so good, no dust, no bubbles. I was worried the bottom screen would affect gameplay bc it has most of the discussion in these reviews. Top screen fit perfect, bottom screen causes gaps, but honestly, I personally placed the bottom screen protector lower and not evenly distributed, and all my gaming and modding work just fine! It’s pretty good product so far, I had no issue. I did just receive it but, it does exactly what I need it to do and looks super good. Maybe do a little more research but I would recommend this screen protector as a solid first or second pick.

I have a NES Edition 3DS XL The tempered glass screen is a nice touch and will protect your screen from fingerprints and dust, but it is not a perfect fit leaving a chance for dust or debris to get underneath the protector. The best way is to center the screen protecter as best as possible so the screen is fully covered. The touch screen, screen protecter however is a perfect fit.

Looks decent and putting it on wasn't too hard it only took an hour to get it aligned perfectly.

I hate applying screen protectors but these weren’t too difficult to apply. Top one was sized perfect and went on directly without any bubbles. Bottom one was slightly too short but if you center it, it should cover 95% of the screen. Was more difficult to apply than the top glass one but this is because it’s just plastic. The few small bottom bubbles were easy to push out. Overall I’d highly recommend.

Was initially pretty skeptical of this product given some of the reviews I've read were about how difficult the application was, but I just finished applying mine and I'm pretty satisfied! Didn't even have to use the second set it came with. I used this on my old 3DS XL model, and to whoever says it only fits the New 3DS XL is wrong, because mine fit quite perfectly so I believe its for both. If your screen was already in rough condition before with a lot of scratches or deep ones, it'll probably make applying it way harder and leave inevitable air bubbles, so that's not really the fault in the product itself. The top screen feels nice and sturdy, and the bottom screen protector is thin enough to not hinder the touchscreen detection, but its good enough to protect it from scratches. I've also seen a lot of complaints about the bottom screen protector not fitting completely, but I believe it was designed to have small gaps due to the bottom screen itself having raised edges. This would mean it would be difficult to peel it off if you wanted to remove it. Some helpful tips I have to make the application easier is before actually peeling off the back sticker, align the screen protector how you want it, then place a long enough piece of scotch tape along the top of the screen protector and the outside edge of the screen. This helps the screen protector stay in place while you lift the opposite side and peel off the backing. If you do this right, it should lay itself the way you originally placed it. Also, if you're having issues with getting dust out, I highly recommend using a compressed air can to gently blow any leftover bits out right before you apply it. Doing all this, mine turned out near perfect I'd say. I unfortunately had a bit of dust stuck underneath my touchscreen protector, which left a small air bubble, but the adhesion of the product is pretty good because all of them basically go away after awhile. You could also gently rub at the area with cloth to speed it up. The tiny piece of dust is still there for me, but its hardly noticeable, and the pesky air bubbles are all gone at least! The only negative I have to say about this product really is probably the blue electrostatic sticker it came with. BE WARY WHEN USING IT, especially on the touchscreen. It's extremely sticky and almost feels like you're about to pull the screen off, so I recommend just using a microfiber cloth and an air duster to get any dust out.

Applied both times and it failed to stay on properly. Every attempt also ended with air bubbles that I could not remove. The bottom film doesn't even cover the entire screen. Application was difficult as the screen protectors weren't properly sized and there was no indication or instructions how to to properly apply. I ended up removing them in the end; a waste of $15 that I am never getting back.

tal cual la imagen

Sowohl die obere als auch die untere Folie passen perfekt auf meinen New 3DS XL und machen einen soliden Eindruck. Bei der oberen Folie handelt es sich um Panzerglas und bei der unteren um eine normale Plastikfolie, die aber durch ihre Größe perfekt sitzt und trotzdem noch Spielraum lässt, falls man sie Mal ersetzen muss.

I bought this product for my 3DS XL and I have to say how pleased I am with this product. The package came with 2 glass screen protectors (for the top screen) and 2 normal screen protectors (for the bottom screen), both of which were high quality and easy to fit. I am extremely pleased with this product as I think it's good value for money and the protectors are both high quality. I definitely recommend buying this if you have the older version of the 3DS XL.

Son protectores de pantalla muy buenos y baratos, encima te vienen 2. Lo recomiendo.

Product as described. Arrived pretty quickly! It was easy to apply. The only downside was that both packs including the 'Wet Screen Cleaning Paper' was completely dried out. But, I made it work!