ValueMax Mini Grease Gun Kit, 3500 PSI Pistol Grip with 3 OZ Cartridge

This is the best little gun, it holds a small tubes and I always use the “Red N Tacky” in my full size pneumatic guns, I use it in a spray can aerosol were you can shoot this grease into very tight small places and then I use this small hand operated grease gun with a Lucas quick disconnect to attach the fittings and then I have a needle with a ball attachment that screws on to the needle and that way the needle comes often on with great ears you don’t have to really press hard to push it on or pull it out and it’s great if you’re going to lubricate very tight places like needle bearings and things like this comment this little grease gun is very useful to me in my shop and you cannot beat the price everything is well-built, there’s no leaks once you load the cartridge there’s nothing that comes out the bottom of the canister where the fuel rod goes in, it’s very well-made I would suggest when you screw the canister onto the head you put a very light film of red and tacky then after you screw the orange container into the head unit if there’s any residue at all you just put a little alcohol on a paper towel and wipe off the residue the gun stays very clean unless your hands are dirty lolGreat Unit, great price very well-made great addition to your shop

This ValueMax Mini Grease Gun Kit is great!! Made with high quality and one of the best. I never owned one and it has very good directions to get yourself going on your jobs. Very easy to use and gets the job done like a professional. What I really like besides of course the whole kit was the "THANK YOU" card in the box from the manufacturer. They honestly made me feel special and I want to thank them back. Their card really touched my heart. I selected their brand out of all the rest and I got a great product and a very warm thank you.. To get your special TY card you know what to do..

I have an old 14 oz grease gun, but it's the lever action type and the flexible hose is wearing out. Difficult to use the old one.I needed to order some more grease and saw this on line. I figured it would be easier to lubricate my wheel bearings with this small pistol grip grease gun, than wrestling with the lever with one hand, while holding the flexible hose on the zerk fitting with the other (If you ever purchase a 14 oz greaser, make sure it's pistol grip and not lever action). It was MUCH easier.I assembled the long fitting (keeping the short fitting and flexible hose in case I need them later), tightened it and the 4 jaw coupler, and there were no leaks anywhere. I loosened the coupler adjuster to fit over the zerk fitting, then tightened it to help it stay coupled and it worked fine. I then loosened the coupler a bit prior to pulling it off the zerk fitting.I would have rated this a 5 except that the included grease has no specifications saying what it is. It does not include the NLGI rating anywhere, and no listing of the drop point temperature, both of which are needed to determine if the grease meets the required specifications for what you are using it for. I will save the included tube for light duty applications, since all it says on the tube is "light duty applications".I loaded my "go-to" bearing grease, Lucas Red n Tacky, instead, and they loaded fine.Just keep in mind that a 3 oz tube for these smaller grease guns will empty almost 5 times faster than a 14 oz tube.

would leave zero stars if I could. Product claims to support bulk filling and be backed by a guarantee and customer support. Cannot find any way to contact seller. All of the grease got pushed behind the plunger overnight after bulk filling. Either the gun is defective, or it doesn't support bulk filling despite their claim. Instructions are vague and don't mention anything other than cartridge filling. Product is also very cheaply made. Their own white logo immediately rubbed off as I was wiping the packing oil off. Wasted a tube of good grease and returning a very messy gun through amazon is probably too much trouble for $20. I recommend you pass.

I like this grease gun. It's solid and functions as it should. I used it to grease my lawn mower and snow blower recently. I feel confident this tool will out live me.You shouldn't hesitate to buy it.

I used this for two wheel bearings on a 12’ enclosed trailer. I bought this size because you may need it on a mower or something else but did not want to store a bigger gun and grease tube for the just in case. I pumped the hose on a rag before I connected to the zwerk, it took about 25 pumps to “prime”. The kit only comes with one tube of grease , connecting with grease zwerk was very good, almost impossible to remove when I finished. I used a little oil on threads when putting the gun together and used a wrench to tighten the connections. No leaks on gun but I don’t know how much grease is left in the gun for future use.

This grease gun isn’t great. It’s difficult to get the air out of the line, making application challenging. The tube of grease was only 3/4 full at the start. I would not buy this again or recommend it

My husband said it was a very good grease gun for the price he really like it