FEL-PRO MS 98016 T Engine Intake Manifold Gasket Set for Chevrolet Silverado 1500

Quedan perfecto y son una mejora considerable comparados con los originales, estos al ser de metal no se deforman como los originales de plástico.

If you are doing intake manifold gaskets on a Chevrolet Silverado 1500, this Fel-Pro kit is absolutely the only way to go. What sets this specific kit apart is that it doesn't just stop at the main intake port gaskets. It comes completely loaded with the extra pieces you actually need to finish the job right, including the throttle body gasket and a full set of fuel injector o-rings. Having those extra seals included saves you from making separate trips to the parts store or reusing old, brittle rubber. The quality of the materials is top-tier, the fitment is perfect, and it completely cures the common unmetered vacuum leaks these engines get. Highly recommended package!

Very strong metal gaskets , strong secure fit when pressed into position , makes intake and gasket change on the LS motor a little easier

2000 GMC Sierra 5.3 LTE Z71 212000 miles... I had a lean code on banks 1 and 2 on cold starts and a lumpy idle... several sites suggested it was a leaking intake manifold gasket...as you can see by the attached picture its likely the original gasket that was leaking...it was filthy with several obvious dirt tracks across the sealing surface... so this was my culprit. It took a lot of cleaning, vacuuming and scraping to get that crap out of there but when done it was glorious (wish I'd taken a picture). Anyway I had to dig the dirt and grease and sand off the bolt heads that the gasket slips over but when done the gaskets "snapped" into place. They are considerably more robust than the GM ones with lots of silicone. After reassembly and checking every fastener 3 or 4 times (I didn't want to go in there again). I was done. I cleared the codes and TADA perfect smooth start and no codes on cold start ... which btw is now -37c. I suggest strongly watching several DIY videos on YouTube.. I wouldn't have even tried without watching several. I'd rate it about a 6 out of 10 on the difficulty scale and a 8 on the testing your patience scale...

Genuine felpro intake manifold gasket kit came brand new sealed in original felpro packaging, felpro intake kit #MS98016T is the best intake manifold gasket kit you can buy for cathedral port LS and LT engines. This kit comes with the updated HD style intake manifold gasket that installs onto the cylinder head first rather then the old style that clips onto the bottom on intake manifold first. This kit also comes with new throttle body O-rings for both 3bolt gen3 style throttle bodies and 4 bolt gen4 throttle body, also comes with EGR gaskets, PCV o ring and 8 injector o-rings. There are many knock off brand gasket makers that copy this exact kit out there but you will never beat felpros R&D and high quality gaskets and o rings. The only gasket manufacturer I’ve been using on all my rigs for many years never disappointed one time!