ArtResin Epoxy Resin – High-Gloss Clear Coat for Artwork - 8 oz (4 oz Resin + 4 oz Hardener) (236 ml)

Bought this out of necessity for my 3D printed sponge holder that develops mold. I was inexperienced and weary of Epoxy Resin but it's blown my expectations and I now see it as a must-have for anyone in the 3D printing hobby. 2-3 layers is all you need to make layer lines virtually vanish and leave a shiny, extremely smooth finish that looks and feels grand. 3D prints typically take a very small amount of Resin making this very cheap, I suggest getting glue applicator syringes to measure out these small amounts. You have about ~30 minutes to work with the Resin after mixing. Drips are easy to catch, and are easily avoided when spread uniformly as the consistency is slightly thicker than paint. A small adjustable butane torch is ideal for removing small air bubbles in the Resin immediately after coating.

Very easy to use and makes a great product. Sets up just like the instructions say. Using a gloved hand(s) to spread the material after applying to the surface with a tongue depressor seemed to work well. I propped my 3D prints up on toothpicks taped flat to a piece of cardboard and slid that into a cardboard box once covered in resin. It will tend to drip over at the slides, so having the toothpicks set away from the edge would be a good idea. Wipe away excess from the edge before it dries completely. Then repeat on the other side if needed.

This is the first time I've used Art Resin. In the past I've used Ice Resin and a brand that I picked up at Michaels. Both of those seemed to intuitively know how to spread out and dome effectively. In working with Art Resin, I found it needed to be coaxed to move to the sides and corners. That in itself is good because it does give you more time to work with the product without it racing ahead of you. Within 24 hours I had a nice hard coat, (although I always wait 72 hours for a full cure). I made a horrible gooey mess of one of the projects and I tried to clean it up...which of course made it much worse. In the future, I'll wait until after it cures to try to fix because Art Resin cleans up nicely and is easy to fix any mistakes. I used this product for a small wood project (about 3" x 9") and some bezel jewelry. I'll order again.

The resin was pretty easy to use for beginners, however I am using it for keychains and deeper things, so I’m not a pro at not having bubbles yet. I also can’t seem to get glitter to not float to the bottom of my pieces, but that’s a me problem, not the product. It’s fairly easy to use and my favorite part is that it’s nontoxic. I still wear protective gear and have a well ventilated area to be safe though. The smell is a little strong, but I’m just sensitive to smells. It’s definitely not a good value for your money though. The bottles are extremely small for how expensive they are. I’ve used the resin a few times to make some keychains and I’m almost empty already. I wish there was more instructions on the best way to get 1v1 pouring though for the mixture. Overall, I really like the resin. It’s fun to play around with, but it is bubbly even with tricks like that warming it up in a hot cup, letting it sit, stirring 3+ minutes slowly, and using a lighter. Still couldn’t pop all the bubbles in the bottom and middle of the keychains. I will be purchasing again unless I can find a cheaper non toxic resin made for thicker projects.

Easy to use, works well and no smell. I knocked off a star because it is so expensive. First time I purchased item it was on sale, but not any longer. I'd like to buy again, but getting tired of how expensive art supplies are becoming.

Love this for jewelry making so easy to use very forgiving moths out nicely

I bought this resin to test before investing in bigger kits (I own an Etsy -WaterLillyArts- ;). ) and I mean it when I say “OFF TO BLICK!” I’m definitely getting a gallon kit of this resin. My only con is sometimes it can be a little too viscous for bubbles to rise and pop so be very vigilant about that but otherwise it fully sets in about 3 days, works well with glitter and ink pigments and is thick enough that when you do use glitter it doesn’t sink to the bottom right away. (Video to show finished product with the resin) I understand why it is expensive but if you are a beginner I would definitely recommend this as it is 100% worth the price

I bought this resin to coat a handmade ramp for my ferrets cage. Being food safe I know it will be less toxic and won’t which chemicals onto their fur or give off toxic fumes. I am personally not a fan of this resin and would not buy it again unless I specifically needed food safe resin again. This resin has so many bubbles in it. I have bought much cheaper resins that don’t produce nearly as many bubbles. This resin is also very runny, which would maybe be helpful if you were using molds, but I had to do multiple extremely thin layers in order to coat my ramp. And even then the resin tripped like no tomorrow. I believe it also said that it starts driving in four hours, but mine took anywhere from 6 to 8 hours, and was still extremely tacky, like if you touched it and pull your finger away, there would be a string coming off. I am really not impressed with this resin at all.

La uso da anni ed è semplicemente perfetta. Effettivamente un po’ costosa, ma la qualità si paga.

大変お気に入り

La mejor y con mas garantias del mercado EU y USA. Resultados expectaculares. La calidad y garantias se pagan. Es mas caro que otras, pero sin demasiada diferencia de precio. Pero en calidad y certificacion oficial insuperable

Es un producto fantástico; el sellado de mis tazas han sido geniales

Ik heb een product ontvangen dat half zo groot is als beschreven, ik ben bedrogen!!!! Ik kan het niet retourneren omdat ze 11 euro te weinig terugbetalen!!!!