7238SB Slug-Buster Knockout Punch Kit with Hex Ratchet Wrench, 1/2" to 2" Punches, and 7/16" and 3/4" Draw Studs, Electrical Conduit Hole Cutter Kit, Low Carbon Steel

Works Great!!!!

I always know when I buy a GreenLee product that it's money well spent. This punch set is no exception. Being from Canada and always seeing this set normally cost around $550 CAD, I jumped on getting this when I saw it for only $300 USD on Amazon.com while I was in the US. I've only used it for 1/2" punches so far and it works like a charm. It leaves a VERY clean hole without any burs or shards that are usually left from a hole saw or stepper bit. The hole is also perfectly sized for the L16 or conduit nipple to fit into. In order to make the initial hole, I recommend that you do have a stepper bit so you can enlarge your initial pilot hole up to the size required to get the bolt through.

I carry the 3/4 and 1" mostly in my bag, with the equivalent size Knipex Pliers Wrench to the ratchet. The pliers wrench is better because it doesn't slip off and has the same leverage / speed. If you're doing home runs or panel work then these make light / quick work of making holes when company hydraulic knockouts aren't nearby. I keep the case and the larger knockouts in my car because I don't frequently use them. If I had known about how much better this makes life, I would have just bought the knockouts sooner. An old man on site users an impact and a 1" socket to twist these in boxes. I'm not that brave, but it seems to still be sharp years later and still takes it. This is a high quality / durable tool, and is known from the guys in the trades. That's why I went with this over Klein or Harbor Freight.

I've been using a hand greenly knockout kit for the longest time this has saved so much time and my knuckles on smaller boxes and allows me to punch then metal that's behind wire mode boxes to enlarge the half inch holes to 3/4 without the forming the plate

This is my second Greenlee knockout kit. The first one was purchased probably a decade ago, and is still going strong. It was the smaller set that stops at 1-1/4. I needed a larger set, so I ordered this one. The ratcheting handle beats my old method of a ratchet and socket, as it sits closer to the work and rolls off less. These are far better made than the Chinese knock-offs, like the ones HFT sells. If you only need a hole or two, buy the cheap ones. If you want something that will last years through countless holes, go with Greenlee.

Great product

Great will buy again

Great product, good value for money. Only issue I had with the set was that when it arrived, the dies had a piece of cardboard above the pointed ends, and they had torn into it, leaving an immense amount of cardboard fibers all over the inside of the case, mixed into all the threads and pre-oiled pieces. It was an absolute mess. Because the fibers stuck to the oil, I had to take everything out and use brake cleaner to get everything cleaned up and then oil it all over again. Other than that issue, I would recommend this set to anyone with similar needs. Ratchet is much cheaper than the pneumatic versions, and honestly not a big deal if you're not doing a lot of holes. I do a lot of service work and getting a new panel to fit an old service entrance can be tricky, but it's much easier with this.

producto llego de acuerdo a lo especificado

Good product but the new carrying case is poorly designed, as every time you pick the thing up all the dies go everywhere, had to fabricate something on the inside so once you latched the cover it presses down on the dies so nothing moves when picked up and carried.

Exente equipo

Works great and the price is way lower than any retailer or wholesaler.

Great buy for work. Was tired of using old beat up Kits at work with missing pieces. Bought this and although initially a little steep you can individually replace anything you need to when needed. Great set from greenlee. Sharp, clean cuts and a sturdy case to store the set in. Impressed