FDW Lift Top Coffee Table with Hidden Compartment and Storage Shelf Wooden Lift Tabletop for Home Living Room Reception Room Office,39.4",Brown

I got this coffee table for my couch at a very understandable price, it's nice and stable, even when you open the top it's solid. It isn't loose, it sits nicely in place. I use it to the point of eating on it when the top is up higher for date nights with my husband watching TV its so stable i even put candles on it out of trust (dont leave them unoccupied though because i have animals). Inside I have all my craft things and I keep my envelopes in there for writing letters, I just moved to a new town where I got married last week and they don't really have any stores but a couple family owned food ones, so I practically ordered every house appliance on Amazon. It's a 2 hour drive to the nearest Walmart and I JUST got a new car, this little table is perfect for food, computers, and storing things you need to. It's very cute too. Very happy with my purchase!! Would definitely buy again if needed :)

For the money, this is a knockout product. It's fairly sturdy, it looks nice, and the functionality is great! My roommate and I have been looking for a coffee table for a while and we are definitely satisfied with our choice! One issue I have with this is that building it was a huge hassle. The directions were not very clear, and the figures were very small regarding the pieces and how the screws were intended to fit together. Also, it isn't technically required to use a power tool to build this but if you don't have a drill, be prepared to get a SERIOUS arm/forearm workout as you will be screwing screws into the wood. The holes are started for you but they are not pre-cut, you will have to drive the screws into un-penetrated wood. Also, the angles at which you need to do this are a but ridiculous. It's possible but VERY BLOODY DIFFICULT. Also, the tool that they provide for this is almost a joke. Like a serious "HAHAHAHA" joke. You would need hurculean strength to construct this coffee table using that little thing. Word to the wise, use a drill, even if it is a cheap one, it will be super helpful. Other than that, this product is a solid "bang-for-your-buck" purchase.

This table was a pain in my butt LOL One of the holes wasn't even but I'm the doofus that took too long to figure it out. I had to get a drill bit and problem solved. I love it though and for the price it's not a bad little table. I was afraid the color was going to be too dark because I had ordered a microwave stand before in espresso and it looks almost black This table is pretty sturdy as well. I seen a couple of reviews where people said it was scratched up on the corners that they should have protected it better but mine was packed very well

Summary: This is a do-it-yourself assembled table having clear instructions, with all pieces & hardware packages numbered. It was packaged well, with table pieces having no dings, scratches, or dents, as the cosmetic sides face inward in the carton to protect from any damage on the carton. Table pieces are well-made, all fastening hardware supplied, and Allen-wrench with Phillips-head screwdriver at one end is included. You will want to use a powered screwdriver to make the assembly go faster & be easier on your wrists. The finished table looks nice & lid raises & lowers nicely, staying secure in the raised position regardless of weight on it until you push the lid forward to lower it. Cosmetic quality is A-. Overall fit of pieces after assembly: B+. I am pleased with the purchase. -Detail- Materials: Table is made of white subtle wood-grain laminate over composite wood. Supplied Hardware: Pre-packaged screws, screws with capture-posts, capture-clamps, lid bumpers, leg floor-slides, and the two pneumatic assemblies was supplied & satisfactory. My packet of wood screws for the lid-raising pneumatic assembly was missing 2 screws out of 16 needed; it is a minor issue as 7 screws appears to be sufficient per side, though may add my own. Round wood-grained stickers are also supplied to cover the exposed nickel-sized hex-head and capture-clamp screw-heads, but those heads are only visible inside the compartment when the lid is raised or when looking under the table. Pre-made construction: The applied laminate was well done, though at one end of the lid and inside the compartment's bottom there is a slight glue excess along one edge, barely visible. All holes have been fully pre-drilled except for the lid-securing holes, which has pre-drilled starter holes. Do-it-yourself assembly: All table parts are numbered, and picture assembly guide is very good. -Allow 30 minutes for unpacking, separating & organizing the several numbered hardware packages, & for placing the table pieces aside on a carpeted floor/area where you can see the piece numbers (stickers). -If you have a powered screwdriver, this will take about 1 hour and 10 minutes to assemble. Without a powered screwdriver this will probably take 2 hours, & you will be tired. -The pneumatic assembly hardware is the last thing to go on, starting with the lid. Putting the screws in will be awkward under the secured pneumatic rods. I unscrewed one end of the rod-end to get more access, then re-attached it after finishing; since the rod is under a mild compression when installed, it takes a little effort to re-compress it to re-attach it. Operation: The secure top needs to be raised & lowered with reasonable strength of two hands using equal force or one hand in the very middle, otherwise the lid goes off-center & binds-up.

Could have better hardware. Half of the plastic locking clips don't lock and line up correctly. If you use the smallest amount of force when screwing they will break off. I broke like 3, luckily this product comes with spares. It doesn't hold. Once you put the main long metal screws in it becomes more solid. Next when installing the top part that raises up 2 of the pre tapped holes in the wood ended up getting stripped out when using the provided self drilling screws. If it wasn't for the 3 other screws to hold it in it wouldn't have worked.

Love this coffee table! Easy to assemble, the perfect size! Definitely worth the money! Fast shipping! Plenty of storage room!

I’ve been using this coffee table for a year, and it’s still in great condition. The hydraulic lift works perfectly, and it’s really handy for storing documents or items you need within reach.

Installing the upper part of the table is a bit tricky and requires two people - one to hold it up when the hydraulic arms are open while the other one screws it.

Amazing coffee table but please read the instructions, don't skip steps as it could get confusing.

I bought this coffee table because of lifting top With the coupon I paid $99.99 CAD before taxes. I am furnishing an area to use as an office space with functionality and cost effectiveness in mind. All of the items in this area were purchased on Amazon with the exception of the treadmill, office chair and electronics. Amazon item list: bistro table & chairs, sofa, coffee table, tall and short basket dressers, 2 desks, floor (happy) lamp and desk lamp for an approximate total of $1200.00 CAD

Practical and looks good but the top came with damage. A replacement was requested and sent but was in worse condition than the original. Followed up a second time which I was told a replacement would be sent, but it never came. Followed up a third time and still no solution.

Great after you are able to successfully assemble. Takes a few hours to assemble. Heavy and durable.