RCHT8612WF T5 Plus Wi-Fi Touchscreen Smart Thermostat with 7 Day Flexible Programming and Geofencing Technology Black

This's 2 Stage cooling for Compressor and 2 Stage Heating , Reversing Valve or electrical heater. one speed fan ( Auto/On/Circulate ). mostly use for package unit Electrical Ratings Terminal Voltage (50Hz/60Hz) Running Current W Heating 20 Vac - 30 Vac 0.02 A - 1.0 A W2 (Aux) Heating 20 Vac - 30 Vac 0.02 A - 1.0 A E Emergency Heat 20 Vac - 30 Vac 0.02 A - 0.5 A Y Compressor Stage 1 20 Vac - 30 Vac 0.02 A - 1.0 A Y2 Compressor Stage 2 20 Vac - 30 Vac 0.02 A - 1.0 A G Fan 20 Vac - 30 Vac 0.02 A - 0.5 A O/B Changeover 20 Vac - 30 Vac 0.02 A - 0.5 A L/A Input 20 Vac - 30 Vac 0.02 A - 0.5 A U Unused

Bought it, fairly simple to install. The problem is that once it runs for about three or four hours it stops cooling. Tried to reset doesn’t work. Tried to re-wire. Doesn’t work. Perhaps a faulty thermostat. Also only one fan speed. Buy a different product on the market. Won't go with Honeywell again. Update guys: bought a new Ecobee and it is a massive difference in between these two. Yes location does not work in Dubai, but the thermostat actually works. This confirms that the Honeywell did not last that long.

Works great, Lyric app clean and simple, absolutely love geofencing capability. Have older furnace (no C-wire), Googled my furnace wiring diagram; repurposed the G-wire - reviewed YouTube: Honeywell DIY Wi-Fi Thermostat Substitute G-Wire for C-Wire-- US and Canada | Training | Honeywell; install was a breeze; confirmed A/C and furnace worked as they should. 2.4G WiFi required. Fahrenheit only choice at setup, after a period of time device will download an update upgrading capabilities including Celsius. Setup geofencing on two phones; if one outside boundary, unit follows "Home" schedule; if both outside boundary, unit switches to "Away" settings. Works with Apple HomeKit.

Excelente producto, funciona muy bien e increíble relación calidad-precio, tiene muchas funcionalidades como uso con Siri, que otros productos (incluso de la misma marca) no tienen. La instalación es super fácil, si ya tienes cableado con otro termostato hay que asegurarse que tenga el cable C. Yo instale el termostato desde la calefacción y solo necesite comprar cable eléctrico que tenía 6 cables de colores dentro. Muy muy fácil de instalar. La programación también es muy fácil. Si eres de México hay que poner en país a EUA para que te permita configurarlo pero al terminar la configuración, cambiar el país a México y ya te permite poner tu dirección para que veas la temperatura exterior. Excelente compra.

We needed to hire a professional to install it. We love how easy it is to read and to use.

This product is rubbish. The wifi constantly disconnects making the device disappear from the app and from homekit. The worst problem is that the device will not accept wifi keys with special characters in it. Difficult to set up, unreliable networking. Keep clear of this guys!

This thermostat is a very good value. I had little to no problems with the install. I read alot of reviews and figured out everything I needed to do before the item arrived. I would say that HVAC systems can be wired in a number of ways and the generic instructions provided did not match what I was seeing in my HVAC. I did not have a control panel in the air controller where all the wires were connected to. I did notice four wires coming out of the air controller which were labeled W, C, R, and G. I saw 4 wires, W, G, R, and Y, connected to my old thermostat and the blue (c) wire not connected. I also saw that the blue wire on the other end at the HVAC was also not connected to anything. I saw three of the wires W, G, R connected to their corresponding labels coming out of the air controller via wire nuts. I saw the yellow wire connected to another wire going somewhere else, which I correctly deduced was the AC compressor. (I found online that the yellow wire is to tell the AC when to come on) Also going to the AC compressor was a black wire connected to the C wire coming out of the air controller. All of that is to just show the generic directions were no good to me. I am not an HVAC installer and did not know the purpose of the wires before this. I actually found a diagram online which showed me the installation I was dealing with. I decided that all that was needed for me to do was to strip both ends of the blue wire (C) and connect it to the air controller's c-wire, along with with the AC compressor's c wire. When my thermostat arrived, I connected the thermostat to the wires per the instructions. I did overlook pushing up the switch for the jumper RH RC so at first it did not work. After I pushed that switch up, I had power. After reading about putting the phone into airplane mode, I did this to start with and followed the prompts on the thermostat and phone. It connected quickly and seeminglessly. The geofencing has worked well so far. There is limited scheduling ability along with geofencing and it works for me. I have set a temperature for when I am asleep, when I am home, and when I am away. (this is pretty much all that is available when you are using geofencing) There is also a vacation setting which I will be using on my next vacation. I like that I can communicate with the thermostat outside of my home. For instance, when I am on vacation and the temperatures are very high or low, depending on the time of the year, I can turn on the air hours before I get home. It does have the auto change over setting whereby it will change from AC to Heat automatically. It works pretty good because there are two sepereate temperature settings for cool or heat. I have my heat set to 68 and cool set to 76. This prevents the ac from running in the winter and the heater from running in the summer. Of course, if you really want to waste electricty, you could set the two settings temperature close to each other and then the heat would turn on in the summer and the ac would turn on in the winter. (I thought the purpose of these things are to save electricity?) I dont have an ECHO ecosystem, I am a Google home person. I have successfully intergreted the thermostat into my google home. I am able to turn on the air or heat. The only complaint I have is that the thermostat has seperate cool and heat temperture settings but when I tell google to turn my heat, or air to a certain temperture, it turns both settings to the same temperature no matter what the verbage I use. I bought my thermostat through Amazon Warehouse so it is even more of a value buy. Many people do not realize that most of what Amazon warehouse sells is open box products. (brand new products that were sent back). It was not used at all. I always get the ones that says packaging is damaged but the product is new...