BORA Centipede Workbench Table Top For Bora Centipede Work Stand Saw Horses - 24" x 48" - Includes Wood Top with 20mm Dog Holes + 6 Quick-Twist Lock Handles for Portable Work Bench, CK22TM Brown

So happy with this. Versatile, compact and with the extenders, makes it a back saver. Bench dog holes are 20mm, all my bench dog accessories work great. Spend the time and paste wax it. Saves it from glue sticking and ruining the mdf.

Big fan on the Bora products and the space saving and portability of the Centipede. The table top is solid and easy to move around. I now have 3 which work great with my 4x6 Centipede.

The 20mm holes aren't - they are only 19.75mm so any 20mm accessories you hope to use with this won't fit. The one I received isn't a 3/4" hole board in the wrong box - the holes are much to sloppy for any 3/4" accessories to work. Anther disappointing feature would be that the edges of the holes aren't beveled so if you were able to stick your dogs or clamps or other accessories in them, the edges of the holes would quickly chip and become an ugly mess. I really don't know how a company could produce something as wrong as this. I contacted BORA about it and received an email asking for pictures with no way to respond. So, here's your picture.

When I bought this I didn't read the reviews enough to discover the twist lock clamps holding the table top to the Bora Centipede was a problem. I could only get one twist clock clamp clamp with enough depth to actually work. Some people modified the twist lock. An easier solution is to use one of the twist locks to un-screw the metal insert from the top of the table top, and then use a 1" forsner bit to reduce the depth by around a 1/16 of an inch, then screw the metal insert back in. If you have diffuculties removing the metal insert, use a Cresent Wrench on the twist lock clamps. From the top it's lefty loosey, righty tighty. NOTE: Use the twist lock clamp from the top, insert the end about 1/2 way into the metal insert to remove/install. I know this shouldn't be an issue but if you want to use the twist lock clamps this method solved my problem of the twist lock clamps.

Very well engineered. The 20mm holes are perfectly aligned. Works with parf dogs and other MFT accessories. A less expensive alternative to other MFT tops. Folds and unfolds easily. I waxed the table for a bit of spill protection and starting using my track saw on it. It will take years to wear this one out, but I will order this top again when that time comes.

Just what I was looking for to make my first multi-function table. Paired it with a track saw hinge i bought on Etsy. From what I understand, actually pairing it with the Bora Centipede is not awesome due to the lack of weight and heft of the legs. Other options such as a full size mft table top, or even the professional jig to make your own, are several times more expensive. This top has sufficient accuracy for most uses.

I can't recommend this. 1. The first top I received wouldn't remotely fit any of my bench dogs... it appeared to be the 3/4" imperial measure top, rather than the 20mm metric top that was ordered and indicated on the box. But with no distinguishing marks on the actual board, who's to say for sure. Cuz, leave it to Bora to incentivize bad behavior: If you charge $15 more for the top with 20mm than the top with 3/4" (19mm) holes, then bad actors are going to buy both, switch the packaging and return the more expensive box with the cheaper 3/4" holed-top to slog off on the next unsuspecting buyer. Thanks a lot Bora! And you can't blame it all on HUMIDITY-- It's July... in California... the hills are brown and dry this time of year. So I returned the unusable top and took a risk asking for a replacement top... hoping it wasn't a problem with Bora's manufacturing, but just their pricing policy and a bad actor. The 2nd top arrived promptly. The top did appear to be the correct version this time, but, geez, ALL of the holes are still way too tight. None of my bench dogs would fit properly. Only one part of one of my Bessey clamps could I POUND into place. Ugh. But rather than return the board (which I should have), I decided to order the UJK Combined Chamfer & Reamer Tool from TSO products for $47.95 + tax and shipping in order to ream out the holes and add a chamfer top portion. But even that is proving difficult. My old trusty heavy duty Dewalt dc988 18v xrp HAMMER DRILL is struggling... cuz these holes are just sooo dang tight. I'm going to end up burning out the motor trying to make these holes usable. I've managed two so far... having to let the bit and motor cool down after each single hole... only 68 more to go! What a headache. Spend the $$, and buy a better version of a MFT top... this one is not it. The only good part about the Bora Centipede system, is the centipede stand. It IS light weight, strong, and sturdy, which is what I wanted... But the top sucks. So buyer beware! In the attached photos, the two upper holes in the far left column are the ones I already reamed out/chamfered. You can see how after doing that, the bench dogs now fit... but all the other holes, none of the dogs fit.

Sehr gut verarbeitet. Gut zu nutzen und zu verstauen. Stabil und sinnvoll.

should be useful for any wood worker.

Yes

Molto utile e ben fatto

Very expensive for what it actually is, it didn't even come pre-rounded. For a piece of MDF that's just drilled, it's quite expensive. I don't need to buy the next ones, I'll make them myself!