VADANIA 300mm Standard Duty Locking Drawer Slides | 68kg Load | Full Extension Ball Bearing Side Mount Runners for Cabinets, Storage Units - 1 Pair #VD1551

Bought these to mount a genny in my van to save the old back. There work spot on and I’m sure they could take triple the weight easily.

I must admit I was quite sceptical about these runners, as I knew that I was taking a risk with relying on these to support some very expensive DJ equipment But upon taking them out of the packaging the robust quality of the runners gave me the confidence to use them The job fitting them was a difficult one because you have no room for inaccuracy when fitting them - there is no way to adjust them if you need to “give” a few millimetres like you can with, say, hinges on a cupboard. I was a couple of mm out in my measurements so I had to add a couple of metal shims in between the runner housing and the inside of the cupboard where the runner would be fixed. It worked out fine We attached the inner runner section to the platform for my vinyl decks and mixer. It was a little awkward sliding the two sections together and it was a two man job, but the platform was 140cm wide and fairly heavy so it was never going to be that simple. Once in, the platform moved back and forth smoothly and locks in both the open and closed position really well. Be careful when opening that you release the unlocking handle fairly quickly because if you keep it open when sliding out then you can easily slide the two pieces apart and that would be a disaster! The plywood platform I made was about 15kg, the two Technics decks and mixer were about 35kg in total and the runners still feel solid when fully extended and I feel confident that they can hold the weight easily. Very happy with these, I just hope they last in longitudinal use.

These things are super solid. I've had a few sets from them now for different projects and none have caused any issues. Great value for a sturdy product.

Came up with an idea which was on the backburner as I couldn't find what I wanted that was until I noticed this product on Amazon. The great thing was I didn't realise the supplier did the product in different sizes. The video was a great help and the product is well made of good material. Anyone thinking of purchasing this, no worries it's straight forward putting it together with the quick realise mechanism as the locking mechanism all in one. Ideal for camper vans, anyone who has a large heavy draw that needs to be easy to access to slide out. Hope this helps. 5* A1

Great sliders for the price. They do have a tendency to get stuck halfway, but just need to release the locks a second time. You need to be careful with fitting as they don't have much tolerance for left/right deviation of slides.

Super strong, smooth and easy to fit. Everything you need (aside from screws) to fit a super strong drawer system. The two parts separate during installation to make it sooo much easier to fit. They now hold the long and heavy kitchen drawer in my van.

Not very happy with the locking mechanism, fitted into my vehicle this week and the mechanism has failed and I now can’t open or close it, and I’m going to have to cut it out now

Nice and sturdy, but the position lock is a nuisance. You need two hands to close the drawer and, then it locks in two positions, so you have to unlock, push, unlock again.

An einer Schiene ist bereits jetzt, nach zwei Monaten der Mechanismus defekt. 12.08: Update. Verkäufer hat vorbildlich reagiert, Rezension deshalb auf 4Sterne gesetzt.

I bought these for my built in computer desk keyboard tray that my builder had put slides in that didn't lock. It has driven me crazy for 7 years that the drawer kept sliding in while typing. Then today we installed these 14" which got me 2" more of my tray out from under the desk and the locking part is awesome and the reason I chose these. Easier to install than I thought it would be. Very heavy duty and stay put. My daily life is changed. Not kidding!

These worked great for my purpose - a sliding shelf to mount a (heavy!) generator in an offroad trailer. Word of advice though - take special care when assembling your final product. I test fit mine and it worked flawlessly, then I had to break it all down for painting. During reassembly I accidentally swapped the outer rails around, much to my regret. (I didn't realize that they actually had a certain orientation they needed to be.) When sliding the shelf back in it wouldn't insert into the outer rails, and like a dope I forced it a little harder than I should have resulting in me having to force it back out again to see what the problem was. In the process I dislodged a pin mechanism in one of the inner rails. (Thankfully I saw the pin fall and didn't lose it.) The end result was me having to break it all down and reverse/flip the outer rails and then re-fit the pin into the inner rail. (Which wasn't very hard, but I was lucky because it could have broken.) So long story short, watch your slide orientation before final assembly. The finished product works like expected and is very solid/sturdy, locking in both the closed and extended positions.

Sehr zufrieden mit den Schwerlastschienen.

Le doy 5 estrellas por ser robustas pero no las he probado