LEIMO KPARTS GX120 Carburetor with Ignition Coil and Air Filter for Honda GX120 GX140 GX160 GX168 GX200 Small Engine Replaces# 16100-ZH8-W61

All parts fit and worked perfectly. My gas air compressor hadn’t been used in 10 years and although I drain the float bowl when putting it up the carb still got clogged up. I pulled it off, removed the bowl and shot cleaner into everything including the main jet which def was plugged but I must have missed a passage way somewhere because while I got it to idle after doing a static governor adjustment it would die when the throttle was opened. Installed this carb and all is well. I finally found a screwdriver that could reach the jet to remove the old one and there might have been a little gunk around the orifice but it was not blocked. I pulled the plastic passageway plug under the pilot screw and blasted everything again and again with cleaner and then did it again. I’m leaving things as they are and this time when I put the unit up for the season I’ll swap the old (dry) carb back on and drain this new one completely. Maybe both will work next time but if not this 3rd party one should go back on and work fine.

Got my Honda gx200 running like a dream. Started right up no problem. Used the whole kit. Even took the gas tank off, drained it and cleaned. The whole system was full of dirt.

I'm glad that i purchased this kit for my sons mini bike. His bike needed a new carb and instead of cleaning it, the smarter thing to do is to buy a tune up kit instead. This kit is worth every penny. You get everything you need to get your engine running like new again. Old carb was not running right because old gaskets were sucking in air somewhere and the motor just wouldn't idle right. Don't be lazy, use everything in this kit to make your motor run like new again. Turns out i needed more than just a carb. Fuel line cracked as i removed my old carb, glad it was included in the kit. Also I've replaced the spark plug and ignition coil because my old plug was fouled up and ignition coil had cracks from California summer heat. Now the most important part of the whole tune up is the gasket placement. Be sure to install them the right way because if you don't than your motor will not run right. Once everything is installed, let your motor run for a while then adjust the idle screw on the back of the carb if needed. Take your time and do the job right, you'll thank me later. Good luck with your installation and happy trails.

The quality and functionality is good I did have problems getting the engine to keep running After taken the bowl off , the float was not adjusted right , made the adjustments and now the engine runs like new

I let my Troy Built rototiller set to long this time and the carburetor need cleaned and rebuilt. When I looked for a carb kit I saw the GX160 GX200 Carburetor with 17210-ZE1-517 Air Filter Tune Up Kit for Honda GX120 GX140 GX 160 GX168 GX20. The price was so good I had to try it. The carburetor worked great, mounting gaskets, fuel tank screen and line was enough to make it run like new again. I installed the new air filter and spark plug because it came with the kit and now it should last another 10 years. I also have spare coil, choke lever and ignition switch that came in the kit for future use. I was able to put the little motor in top shape in about 30 minutes. I would have spent more time than that just cleaning the old carburetor. If you think you need a carb kit, buy this instead. You'll come out way ahead.