2.5m/8.2ft Carbon Fiber Front Lip Spoiler, Auto Parts Bumper and Side Skirt, 100% Waterproof Protection (Carbon Black)

هو ليس كما في الصوره ..

سرعة الشحن

So look in the pics and see that this is the correct way of installing this. First off I cut relief spaces around 4 inches apart. I used like 50+ nuts and bolts w/ red loctite. Once lined up (pretty much just eye balled it) on the bumper drilled one hole at a time and dropped a screw in without a nut. Once I made it all the way around i pulled off the rubber and made sure everything was clean and smooth. Once cleaned all was left was to pull the backing off the tape and put on the bumper making sure the bolts lined up with the holes going 3 sections at a time. Then this is the most rewarding part....Must have a heat gun ! Break out the ol heat gun and start warming up the rubber making sure ya don't cook it. Just get it to where you see it start to move a lil with the heat on it swiping back and forth in foot sections. All those imperfections are now gone (wavy notes on the rubber due to curves and what not). When the rubber cools down it will get more stiffer again so don't worry if it feels soft. All your looking for is crisp even lines. You'll understand when you get it out the box and pieces look like " how the hell is that gonna even out". The 3m tape pretty much is garbage and I knew that from jump street so I could have gone with rivets or bolts. I went with the latter just in case i need to replace it one day. Looks at the pics I have a 2014 Hyundai Sonata and it pops now with this on there !!!

色が白っぽくカーボン調と言うより2Dの安いプリント模様。折り畳まれた状態でくるので、外で日光に当てて伸ばしたが、軽く波打っている状態。ヒートガンで加熱をしたが最後まで真っ直ぐにならなかった。3Mと表示されている両面テープが貼られているが、こんなに粘着力の無い3Mテープは無い。剥がして本物の3Mテープを使用しました。カーブのところで三角形をいくつも作り曲げていきますが、材質の硬さのせいか曲げた後が突っ張って浮いてしまう。養生テープでガッチリ固定し対応。出来上がりは、カーボン調にも程遠い。艶も無くいかにもプリントしたシルバーぽいものがバンパー下に付いた感じ。パッと見ても安っぽさがすぐわかる。何のために付けたか聞かれたら、リップスポイラーのプロテクター。と、言って自分を納得させるしかない。金銭的にも負担になったが時間と手間を費やした事に頭にくる。購入を考えてある方、クオリティが低いのでやめた方が良いです。

It was easy to install but the adhesive is not the greatest thing so it is good that they gave you screws to use

I live in Ohio. I read the guys review from Ohio saying how well it stuck without the screws and he had no issues. Sold! Well lol, he is either the dude who sells this or is a paid spokesman. Mine stayed on for 3 days. That's it. And I even used the included screws for reassurance and good thing or it would have been off and on the road by now. PS, 4 screws is not going to cut it if it don't stick. 8 maybe but not 4. And most people don't have self tapping small screws just lying around. It stayed on the straight front parts but failed on both corners. I feel like I should have gotten paid for how crappy my car looked on the ride home when this happened btw. Stuff just hanging off the bumper....so I learned that yeah it looked good when attached correctly and that one great OHIO review should not sell you when there are 50 other bad reviews saying it does not stick and that there are not enough screws. They are correct. Man though, that guy had me pumped with the updates and everything. Like if it made it here it can make it anywhere aditude. And I'm from OH too so everyone else just don't know how to properly install. That's what the issue is! Lol nope no it isn't. And if that guy isn't payed you should btw. He is the reason your selling any at this point.