be quiet! Silent Base 802 Window white

What I did not really like: The feet/leg design looks unique, but I think a traditional rubber feet design (like on the Dark Base Pro 901) would have been more practical. The case was quite expensive, yet rubber covers for top I/O ports were not included. Three black coloured fans were included with the white case. For such an expensive case, the fans should be white or clear to match the case. Also, they are not PWM or Silent wing 3 fans. The colour of metal parts does not quite match plastic ABS parts. Black side mesh can get dusty, and will be hard to clean. When inverted with a glass side panel, there is gap between the panel and the back of case. Below and in front of the hard drive cage, there is space for an optical drive (at the bottom like on the Dark Base Pro 901). However, a piece of metal at the front prevents this space from being useful (other than for liquid cooling) on the Silent Base 802. Would have been nice if they made the metal piece removeable. Pros: Easy PSU installation. Large size makes it easy to accommodate cables, drives and etc. Can be inverted Quiet Good air flow Great dampening

Recently purchased one of these cases to refresh my build, which was getting rather cramped after getting a 7900xt. Chose this case because it can be inverted for the left side of a desk, and for the looks. Inverting was a relatively straightforward process that took about 2 hours, with distractions. Construction is very high quality, and the included 3 140mm fans provide ample intake air. Strangely, I cant get the included fan hub to work with pwm control on my motherboard, and it just puts all fans to 100% speed. At this speed the front intakes are completely deafened by the top intake fans that spin twice as fast. In fact, the front intake fans may never get above an audible level because they top out at 1000rpm. Other features of the case included a removable radiator/fan bracket in the top of the case, I put 3 120mm argb fans up here for case illumination. The fans in this position also case a nice glow through the top of the case, onto wall next to it, another win for the rgb gang. I did not run comparative temperature tests vs non-inverted, but my 5800x3d tops out at 80c, and the gpu hovers around 70c during gaming with a 90c hot spot. I populated the psu shroud with an additional 140mm fan, to add airflow for the cpu cooler. Pros: Thick glass side panel with simple push button removal, no tools required. The other side panel has thick sound dampening foam, for all those noisy cables. Same push button removal. Integrated dust filter in the front of the case, and a magnetic one is included for the top. Included sound dampening front panel and airflow front panel, I went with airflow. Ample interior space for water cooling, several HDDs, large GPUs, etc. Cons: It is very heavy, and awkward to move around with body panels attached. Cable management is good, but not great. Sleeved power cables barely fit through the provided hole in the bottom of the case in inverted mode. Integrated fan hub does not worth with my motherboard's pwm control for some reason.

C'est un très beau boîtier de type grande tour,modulable, prêt pour installer un watercooling,il respire la qualité .Trois ventilateurs de la marque sont fournis avec,ainsi qu'un rack pour disque dur.La baie vitrée est du plus bel effet,on a la possibilité d'installer la carte graphique à la verticale suite à un emplacement dédié,made in Germany,je recommande vivement.... .

came with a dent in a corner, which interfered with one of the sections. still waiting on a refund after a month.

My second build since 2020. Was on hunt for a nice "white" case. I already own NZXT H710i and did not want to get another one of the same case. I needed enough room for 3090 FE card which is HUGE. All new GPUs are massive in size. This case has ample room for the largest GPUs to fit in. Secondly, the build quality of this case and every single component is top notch. I cannot describe every small piece, but no compromise was done for any portion in the case. The love the covers and PSU shroud which offer flexibility to cover up and not expose any wiring. It leaves a beautiful clean build with no wires. The additional front plate and top plate are welcome to use airflow vs, noise dampening. The back panel has a thick noise dampening material (1 cm or so). I would happily buy another one of this case if I were to make another build for someone. Yes, its a little on expensive side, but worth it since you use it and look at it every single day. The amount of space to put two 360mm rads easily in push-pull configuration. The top rad can be put on the frame and then slid in anytime. very useful if you need to reach the top of the motherboard for anything after the build is complete. I also used the additional slot for 140mm fan at the bottom and this gives the FE GPU fantastic airflow. I also added one additional 120mm fan that I had laying around on the front. The whole case is modular and for advanced users, you can flip the whole side from left to right or build the system upside down if you want. Wish list - If there is anything I would want in future, I would love to get a tinted window instead of fully clear window - just for my taste. I am the new Bequiet fan and looking forward to more advanced cases in future ! I highly highly recommend this case to anybody whose budget can afford this case. You wont be disappointed one bit !