Glorich DR-E18 DC Coupler Dummy Battery ACK-E18 AC Power Supply Adapter Kit for Canon EOS Rebel SL2 SL3 T6i T6s T7i T8i 77D RP R8 R10 R50 200D 750D 760D 800D 850D DSLR Cameras, with Fully-decoded chip

I couldn't seem to find a single non-Canon AC power adapter that didn't included reports of mic noise/buzz/hum - presumably because they don't include ferrite beads. This adapter cable does include the ferrite beads filter on the coupler just as the official version does, and I'm happy to report that I have not detected any sort of hum in the video recordings when in use. Additionally, my 250D (SL3) seems happy with the adapter and shows 100% charge with no warnings whatsoever. Build quality seems good too. I'm happy with my decision and recommend this to anyone with a compatible Rebel series camera. It's cheap, effective, and gets the job done for anyone who uses their Canon DSLR for studio or long session shoots.

Remember to read the instructions on how to close the battery compartment. This will not work with the SL3 unless you close the battery compartment. It is the lowest priced unit currently on Amazon. A solid buy. Thanks. 1. Plug in power brick. Green light comes on indicating power. So far so good. 2. Plug the battery sized adapter to the power brick. 3. Insert the battery sized adapter to the Canon SL3. Perfect fit. Correct orientation. 4. Turn on camera - nothing. No power. Multiple inserts etc - no availe. 5. Insert battery in camera - instant on. Indicating that camera works. So 1 star rating for this buyer. This is unfortunate as I need to do an extended webcast on Friday.

This is a must-have if you shoot any video at all in a studio or at home. This can be used with several Canon cameras using the LP-E17, but not all so check for compatibility first. I use this with the EOS RP when shooting product reviews and it takes away the biggest frustration for me, which is always swapping the batteries out for fresh ones. No errors, the camera sees it as normal. So if you find yourself on YT shooting in your in-home studio with any of the compatible cameras, don’t think—BUY.

I wanted a power adapter to use with my EOS 80D as we webcam. This Glorich ACK-E18 is indeed fully decoded. I did not receive any warnings when powering my camera up with it and I was also able to register it in Battery Settings. The power transformer and battery standin are both a very lightweight plastic. I'm unsure of how they will hold up to abuse, but in my setup they are unlikely to move often. It might take an extra second to power the camera on vs using a regular battery, but that's nothing to bother me. I've had it powering my EOS 80D in webcam mode for a couple hours without a hitch.

I bought this for streaming, my Canon sl3 won't even turn on with it in. This is the fourth dummy battery I've tried, I wish they'd stop listing camera models that don't work with them, it's a huge money drain and very frustrating.

This is a great alternative to failing batteries! Good price. Camera-side cable is a little thick and a little short but works just fine.

I frequently need more power than the stock and aftermarket batteries can provide. Yes, I have many batteries charged and ready to swap at any time. However, swapping batteries is not always an option when recording video (which is what I use the SL2 for mostly). The Glorich ACK-E18 power adapter kit solves my power problems. The "battery" fits in the camera without issue, the cables are long enough (for me) to plug into power, and it gives me power for as long as I need it. I no longer have to stop shooting, swap out batteries, and start shooting. Now I set the kit up, power up the camera, and shoot until the shoot is over. I am no longer a slave to battery power.

With the need for more Zoom meetings for work and general social needs (also, distanced Dungeons and Dragons) and the recent lack of good webcams, I needed a long lasting solution to using a DSLR and the Canon Webcam Utility. This gets the job done. I can go several hours and not have to worry about battery life. I was worried about it's build quality, but haven't had any issues yet.

Gostei

Funny thing when you've never tried running a cord out of your camera's battery compartment - you never notice little things that are hidden in plain sight. LOL When I unboxed this adapter for my Canon SL2, I was trying to figure out how to run the cord out of the battery door - because the camera won't power up if that door isn't snapped closed. Canon apparently thought of AC adapters when they designed it, and there's a little rubber flap that I'd never noticed before ... you just pop that open and the cord fits it perfectly. Once I discovered that, the camera powered up on AC power with zero issues. Battery indicator on the screen showed full bars and everything worked fine. While MOST of the time I'm fine on battery power, it's great to have this option for long-duration use - or when you're using Canon's webcam drivers for the sharpest webcam on your lengthy Zoom meetings. It's not a must have for general photography - unless you do a lot of indoor studio work - but really handy for times when you need your camera powered up for long periods of time. Great bit of kit!

Increíblemente útil en mi Cámara Canon T7i sin necesidad de preocuparse por que la cámara en algun momento se llegara a apagar. Hasta el momento me a resultado util.

Nunca me enviaron mi paquete y no responden cuando se les intenta contactar. Pésimo servicio, no compren o perderán su dinero

The only thing I'm unhappy about is how long it took to arrive. I ordered the item on May 9th, and it arrived on June 12th more than a month later, which was a real pain because I needed it urgently. Aside from the ridiculously slow delivery time the product itself works great. Just be careful when you insert the coupler, there's a small cap that has to be removed to make room for the cable to exit the battery compartment so the battery door can be closed. If this door isn't closed properly the camera won't function. Make sure the cable is pushed flush against the top of the compartment exit space so you can properly close the battery door without damaging it.