AC Infinity Carbon Steel M6 Rack Screws, Nylon Washers, and Cage Nuts. | 50-Piece Set for Equipment Server Racks, Enclosures, and Cabinets

We ended up moving into a new facility and wouldn't you know it every rack uses a different screw size. I recognize this one right off the bat because I've seen this model before. Of course then the issue was how much is it going to cost to replace all the screws that the previous tenant stole. Well apparently not very much, this 50 piece set comes in a recyclable and highly attractive container and the screws themselves have nice little plastic washers on them to help prevent scratching. I had no problem with the threads on these screws they went in very smoothly and I never experienced any binding or stripping. Overall it's exactly what I needed in the price point was unbeatable. I'm glad I was able to just get all the screws we'll ever need for our facility in one low cost purchase and everyone's happy. I recommend these if you're in a spot and need this screw type for your rack, I had no problem with the quality of the threads and they're Phillips heads and worked just fine with normal bits with no skipping or other issues.

I've bought several sets of these in different sizes and these are now my "go to" rack screws. The packaging is great, the size is clearly labeled on the side, and I really like the incorporated washer. The end of the screw has a pilot making them easy to thread onto cage nuts or posts that are drilled for 12/24 screws. I'll definitely be ordering more of these to keep at each site I support.

So after dropping a sizable chunk of change on a new rack, after exhausting the local options for secondhand, along with a new managed PDU I wasn't keen to spend a ton on mounting hardware. The clean, snappy packaging caught my eye and to my surprise the price was about the same as the no-name unbranded rack screws so I promptly pulled the trigger.I can safely say that if you're in the market for 10/32 rack screws you probably aren't gonna do any better, especially for the cost, than these from AC Inifinty. Sadly, I was in the market for M5 or M6 w/racknuts for my MDF and accidentally ordered 10/32 while in a hurry one morning. I cannot however, fault the hardware here in any way. I genuinely wish I had something that took 10/32 screws, because upon inspection these are the product of careful thought and attention to detail.The semi-matte, satin finish is consistent throughout, the washers are all evenly sized, no plastic slag or variation, visual inspect of the screws themselves shows very clean, well machined threading with the guide tips to ease awkward install positions. And the little cylinder/tub container is likely to last as a misc rack hardware tin that sits inside the rack to hold the loose ends of various activity in the rack.All around, something as mundane as rack mounting hardware can apparently be more polished and "premium" in both presentation and execution than I knew. Well done. Now I just need an A/V rack or whatever variety of mounting frame(s) make use of these 10/32 screws...

I use these in my home lab.. makes things a easier cause of the nice simple case they come in. Work great!!

Solid af. Love it tbh. Got em for a server rack.

Great rack screws and they won't strip out. Bought 3 jars so far.

Decent hardware. Hand tighten or screwdriver with a clutch is a good idea

Rack screws are in general just rack screws. And when you buy them you usually just get a bag. And the bag can spill everywhere when you tear it open. These screws work well and they come in a nicely labeled container. So I can easily say the best thing about picking this brand over the ones where you just buy a bag is that you get a container that you can dump all those other bags of screws into as well.The screws also come with the washers already on them, which saves you a step when you are reaching for a screw and a washer. It may not seem like much, but it adds five or ten seconds when you have to find a washer to go with the screw and slide it on. And, of course, drop one or two. A silly little detail, but they took care of it nicely.

Kurz und knapp: genau die richtige Schraube für die SKB Racks und Cases. Tipp: die Schrauben haben bereits kleine Unterlegscheiben. Wer die Geräte optimal vor Kratzern schützen will nimmt zusätzliche Unterlegscheiben M6 mit 12mm Durchmesser, z.B. https://www.amazon.de/dp/B0DSBBGH73?ref=ppx_yo2ov_dt_b_fed_asin_title

classic proの4Uラックに使用するために購入。音響機材のマウントに使用。(ラックマウント用ねじでもM5ねじなどと間違えないように注意)ねじの引っ掛かりなどもなく、ねじも重量感がありしっかりしたもの。初めてのラックマウント用のねじ購入だったがよいものだった。

Excelente producto!

This AC Infinity screw set is my default choice for all server and AV racks. The carbon-steel screws feel solid, threads are clean, and the black finish looks sharp. The included nylon washers prevent panel scratches and give a nice snug fit.I’ve used several of these kits and every piece has been consistent — no stripped threads or weak cage nuts. For anyone who racks gear regularly, these are reliable, professional-grade fasteners that just work every time.

Muy bien. Roscan perfectamente en racks integrados en muebles de studio Omnirax.