D-C-Fix 346-0306 Decorative Self-Adhesive Film, Grey Marble, 17" X 78" Roll

Nice one, it was very easy to use, I used it to cover the ikea table to make it look a bit different . Very nice, definitely recommend !

Worked, a bit difficult to install

Super....Tres resistant...a acheter

I used this marble contact paper as part of a makeover on two ikea dressers. I was hopeful yet skeptical, so I was thrilled at the quality and the results! It looks amazingly real! Everyone who sees it has thought that it was real - I only know this because I proudly announce, "DUDEEEEEEE THIS IS CONTACT PAPER!" to anyone that sees them, whether they care to know or not. It's only a little bit of a pain in the butt to put on, which is ok because I expected it to be a large pain in the butt. Here are a few tips: 1) I think the most important thing is to unroll it slowly as you work so that you can hold the excess paper as tight and taut as possible while you smooth it on. I used a 6 inch plastic ruler to work out the air bubbles. Slow and steady wins the race when putting this on, but the results are worth it for the money! 2) I followed the suggestion of another reviewer and googled "how to do corners with contact paper" and found a lot of helpful suggestions. As usual, the internet makes everything look a little bit easier than it really is, but I was able to finagle a few ideas together and make them work for me. 3) The paper was just a little too narrow to cover the entire top of the dressers, so I had to use two strips. There's a seam where the two meet - this would be almost impossible to avoid as it's not an actual slab of marble and I am not some sort of contact paper whisperer. For my purposes, this is totally fine - I used as wide of a piece as possible and then used a smaller strip at the back of the dresser. Since the dressers are against a wall, and I have various tchotchkes on them, it's really not noticeable. If you are covering a large and/or highly visible surface, this something I would consider. It's hard to get the patterns to match up along a seam - and even if you did, it would likely mean wasting a lot of paper AND the seam would still be visible if you were looking at it from close up. If this is the type of thing that would drive you bonkers, it might not be the right fit for you. I also think curved surfaces/corners would be tough. Do-able for those folks out there that are pluckier and more patient than me, but I probably would have lost my marbles. 4) Have your tools laid out within arm's reach before you start - once you remove the backing from the adhesive, it's really all systems go time. Here are the things I found most helpful: • Plastic ruler to use for a "squeegee". Obviously it doesn't have to be plastic, or even a ruler, but you are going to want something rigid/strong for this. I found the advantage of the ruler to be that there's no handle - I did this project on my own, so I found myself contorted at odd angles for much of the time, and a squeegee handle would have been unwieldy to manage. • Scissors • X-acto knife - I used the scissors for making big cuts and the x-acto knife for cleaning up the edges and doing the corners. • Pencil - helpful to measure/mark the back of the paper for extra strips/pieces. All in all, for the price, it's a seriously awesome product for small projects. I ended up needing to buy two rolls for this project (two dressers), but have most of the second roll leftover for a rainy day DIY.

I covered the sad bathroom cabinet top in my new place with this contact. I did find it tricky to get flat without bubbles, but I went over it with a pin and smoothed them out. Loses a star because the smell is quite strong, I had a headache after installing, and I would love it to be more matte instead of glossy. I caulked around all the edges and this really made a difference to how it looked. Next time I’d buy a wider roll, but overall very happy!

Does not stick on walls at all, glue is not strong enough to hold the contact paper in place. Very disappointed

Used this to cover the ugly composite-stone windowsill in our apartment and I'm so glad I did. One roll was the perfect amt to do the entire 11.5' sill and it looks a lot cleaner and more modern. It's a $7 solution to fix a permanent eyesore. Some advice if you're new to contact paper: - I used magnets to attach one end to the fridge to hold it in place while I cut the entire roll in half to get started. - USE A HEAT GUN. Its $25 and so worth it. Ots especially helpful to create smooth edges and make sure everything stays stuck down until you want to remove it. - FRESH RAZOR KNIFE is KEY! Buy a new one or change out the blade on yours so you can cut edges and extra pieces off easily without having to pull or saw at the paper. It's crazy how big of a difference this makes in the ease of application and how easily its overlooked. - Buy a felt-edged smoothing tool. The tool also has a harder plastic edge - never use it. If you have a small piece of dirt/bump under your paper, it will rip it. - If you can, caulk around it with bright white caulking. It makes a huge difference in A) the staying power B) the overall look. One thing about this particular paper: - With this paper the overlap was more obvious (white over white = really bright white). I've only used a thicker, darker paper before which could overlap invisibly. I got around this by lining up the seam really carefully in the middle. - For that reason, try to use contiguous pieces as much as possible. I used two leftover pieces to cover a wood piece at the bottom of my door, and I'm not overly happy with how it looks because of the overlap in the middle.