Krylon K07020007 10.25-Ounce Easy Tack Repositionable Adhesive Spray

This worked great for me. Used it to Attach paper stencils cut on a MARSH stencil cutting machine a couple light passes left a sticky coating similar to a “post it note” or painters masking tape, made for a clean stencil job with no bleeding and easy to remove with little to no residue, any residue could easily be wiped away with warm soapy water. Wait 60 seconds after applying spray tack to stencil before placing stencil onto work piece. Stencil is easy to reposition and stays sticky for a long time I would buy this again and recommend it to anyone doing a stencil job (Masking tape in photo was used to prevent overspray)

I use this spray to restick my Cricut mats. I've heard mixed comments before and thought I'd try it. I'm here to say, it works great. I did not gum up my Cricut as some have said. And it worked far better than other brands I've tried which were too sticky so the paper couldn't be peeled away. This does just what it says, it allows you to stick and peel away and reposition - exactly what you need for my application. The only drawback is spraying a glue in my home...I don't want it all over, so I've taken to using a large cardboard box as a "spray booth" to avoid mess. Hope this helps someone out there.

The product works very well. There are a few caveats though. They spray leaves a small texture and that's about it. I bought it specifically for my cutting machine, Brother if you want the brand, after the cutting pad lost almost all adhesion. When this happens cuts no longer work well. So after cleaning the cutting board with soap and water I have it a quick spray. 5 minutes later I was back again. The spray is good enough to hold cardstock. Also not too strong for normal copy paper. Its perfect!

At first, I didn’t like this adhesive. I got it to spray on my Cricut mat because a blog I read said it was the best. However, after spraying my mat 2-3 times, paper still wasn’t sticking to it. Then I wiped all over it with alcohol, sprayed it three times again, and my mat is working great now!

We've used other spray adhesives over the years, some big brand names. I was surprised that there would be a noticeable difference in the spray evenness and consistency, i.e. no splattering, the spray does not blast out of the can on the first push of the button and dribble when you complete your sweep. Nice. My application: I had several projects all framing posters, photos, light objects in picture frames, shadow boxes, and non-picture glass. I had 15 frames to do, I sprayed them all at once one one side and proceeded to position each item on it's backboard one at a time. I repositioned as necessary to get a better visual effect or balance more pleasing to the eye. (not everything looks best centered). Two photos I needed a very secure bond, so I sprayed both surfaces, waited a few minutes for both to get tacky, pressed together - not really repositionable but a very secure and firm bondthat I know is not going to wrinkle over time.

In my woodworking, like to attach templates to the wood blank. This allows that and the template can be removed with ease. It also does not leave any residue.

This is the best stuff I think I have ever purchased. I am stenciling a slanted, highly textured ceiling with a huge stencil that is hard to handle and get stuck to the ceiling. Once I learned to put the can’s nozzle about 4 inches from the stencil and ensure to spray every spot AND spray it every single time I apply the stencil to the wall, the stencil sticks to the ceiling like magic. Even with the high texture of the ceiling, bleeds are rare. The difference between the areas I stenciled before I discovered this stuff and after are astonishing. I am going to repaint the areas where I did not use the Easy Tack and redo the stenciling with it. I can’t describe how wonderful this stuff is for stenciling. I used 1 can for every 24 square feet and took me 7 cans to finish the project, but worth every penny!

Didn’t hold up my stencil. It was definitely sticky so maybe just not enough for the size/quality stencil I had.

great

Great stuff

Used this spray adhesive to stick lace and ribbon on to glass jars to make wedding tea light jar decorations. Stuck well and looked great, but never fully dried (was always slightly tacky to touch). Wasn't an issue though.