Automotive High Heat Spray

As long as you follow proper baking procedures works great. The color is VERY matte! Be aware. But also nice. Held up well so far after 1 month.

Used it to paint my Jeep wrangler borla exhaust mufflers and tips. Followed the instruction and cycled the heat treatment. It is holding very well so far and looks factory finish.

The colour is black met It's dry fast You can make many layers easily

Used this to repaint my rusty grill and the end result was a satisfying matte look

very good product

ممتاز

سيئ

As described

Best ever product. Very good for rusted exhaust pipe and exhaust muffler. Just clean whole exhaust unit and apply one coat first. After 20 minutes apply second coat. Definetly valve for money product.

Have a 20+ years slow combustion stove, with time the finish degrade and start to look real bad. Was previously using a product specially made to restore wood stove finish. Unfortunately, when using the stove after applying the product, the smell was bad enough that I needed to open a window to get rid of the smell. This paint smell a little on application but no odor wen using the stove and no need to do it every year. Now stove look like new and no smell.

المنتج جيد 👍

As someone who builds "Alpha/Romeo 14+1 pew pews" (IYKYK) I wanted something scratch resistant and rust proof to protect my yeet tubes. Cold bluing is ok, but leaves the steel still vulnerable to moisture and surface rusting. Since the yeet tubes will be subjected to a ton of heat, I chose this particular product. Couldn't be happier. 3 coats went on super smooth, dried evenly somewhere in the ballpark of semi-satin (?) ...less than satin, but not quite dead flat. Zero runs, dries fast, and way better than a lot of other brands I've tried. I think I'll be using this product on all of my boomstock yeet tubes from now on. Couldn't be happier! Professional look, finish, and texture at a fraction of professional smithing costs!! I even recommended this to a bunch of my outdoor enthusiast buddies and vet friends! Now they plan to do the same! Pros: even coverage, smooth finish, near-flat like I wanted, zero runs, cheap and easy, dries fast, easy application, durable and more scratch,/rust resistance than cold bluing Cons: -(/) Just do it if you're a 2A supporter who enjoys slinging lead.

First of all i got the paint with a broken seal cap, although not a big deal because the paint seemed to be intact and fine Now i have a bike whose exhaust heats a lot and it had to be painted due to scuff marks and scratches , i prepped the surface with some sand paper (400 grit) and cleaned with rubbing alcohol, i sprayed the paint as instructed and tried to bake , the paint bubbled due to high heat but i switched the bike off and let it sit and cleaned the bubbled paint immediately, i let the paint sit overnight and fired up my motorcycle again in the morning, again it bubbled but now from some places , as this was my 1st paint DIY so i am sure that this bubbling is on my part and not on the paint part, i probably made some mistakes in the prepping and spraying of paint , the surface where it was nicely prepped and primed are looking awesome , go for the paint but get the prep done correctly and go for primer before paint , don't buy from here just go to local market and ask a automotive painter to prep and prime the exhaust before you paint