iSANMATE 3D Printer Filament, PLA Filament Glow in The Dark, 1.75mm Dimensional Accuracy +/- 0.03 mm, 1 kg Spool

Make sure you dehydrate your filament.This stuff prints easy if you dry the filament, though I did have some breaks. That said, it is quite brittle compared to normal pla, but the finished product is beautiful. For best effect, use a LED light on it for a bit to "charge" it up, then turn off the lights and it will shine bright

The color was great through and through. Nice and bright. They fit well on my AMS lite which I'm learning that most spools this size do not. No tangles, which is definitely a bonus

With my very first 3D printer, I could only print with ABS. At that time, I frequently printed in a Glow ABS. Kids just seem to be really intrigued by Glow-in-the-Dark items and it was a big seller back then. I have looked for PLA in a glow for quite some time and the only items I found were way to over priced for my tastes. Then I stumbled across ISANMATE's Glow in the Dark Filament and decided to give it a go. When the box arrived and I opened it, I saw the same quality packaging that I always see in ISANMATE's filaments, solid box with a nicely vacuum packaged roll of filament. Removing it from the package only took a few minutes and it was set to print. I really appreciate the quality of the spooling of the filament. Nice even rows of filament shows that ISANMATE takes the time to get it right the first time. I normally do a test print, without running a Temp Tower, just to see hoe the filament prints with "Standard Settings" The Benchy printed beautifully on my MK3s. Once the print was done, I let the print sit in the bed and cool and soak in the light. Then I turned off the lights to see how well the glow would show. Some filament I have tried in the past, had a very low glow and it was difficult to take photos without adding some additional light. Not so for this filament, these photos are straight from my phone. There is a little bit of stringing visible but a few extra degrees of heat will fix that and then these will be perfect. The last image is what 3D printing is all about. Our old Christmas tree star died and we had to buy a new one. The star came with a terrible mount that looked like it was made from the top of a milk carton. as tall as our tree id, the star would never fit on top with that stupid mount. I took the mount from the old star and testid it. The "Chip Clip" design is great and allows the star to be mounted lower on the tree and that way it clears the ceiling. The mount had a green tube on top that fit the old star but didn't fit the new one, it was bigger. After 15 minutes of time in the modeling software and 30 minutes of print time and the new star was on the tree. The glow filament isn't as white/white as the star but buried in the tree, you'll never notice.All in all, I have come to like ISANMATE's filament and the price is very hard to beat. If you need to GLOW, give this filament a try!!

Decided to give this stuff a try. I had heard of CF-PLA having adhesion issues. I would say it doesn't stick as good as regular PLA, but stuck well enough to print a Benchy without a brim or raft directly on my PEI Plate heated to 60 degrees. I ran a couple temp towers with it and found that it does not like to bridge well. However, your results may vary, I tried it with a stock Tenlog TL-D3 Pro, which only has 1 sided cooling. Its possible that more cooling could benefit. I did notice it like to curl on steep overhangs, again, maybe something that could be fixed with more tweaking. I plan to keep testing different fan settings and see if I can get it fixed. If I do, I will update my review with my finding. Surface texture was great, love the matte finish. Prints felt very rigid and strong. I was able to put a lot of force on the temp tower before it snapped at a layer line. Filament itself is very brittle. It snaps very easily. I recommend using a direct drive system to help eliminate any snapping issues. This was not due to moisture as some may think. I took it directly out of the vacuum bag and started my tests. Overall, I think this is a good filament, just maybe not for the beginner with a bone stock Ender 3.

I'm very pleased with the quality of this filament. I didn't have high hopes going into it because I have never heard of the brand before, but all my prints have been amazing! Would definitely buy this brand again. The matte finish looks great too, it almost hides the layer lines!!

The media could not be loaded.  El filamento creo que es de muy buena calidad, no tuvo ningún problema al imprimir, su.color cumple con las imágenes que se están mostrando.Creo que por el precio es un buen filamento

The quality of the PLA itself if horrendous, it's not multicolor it's just translucid white and it barely glows in the dark.

Awful product. Does not glow in the dark what so ever. Totally miss sold this item and very let down. Avoid at all costs

Produit impeccable et parfait pour l'impression

this is just amazing it prints so cleanly without any problem at all prob 1 of the best i have used and the gradient is lovely too