OVERTURE 2KG Bundle PLA Plus (PLA+) 3D Printer Filament 1.75mm

I always look for quick sources for PLA to use on my X1C printer other than wait for a shipment from BBL. Prices on this are currently comparable to a large quantity buy from BBL. Support structures break away easily, and seems to be less brittle than most standard PLA. Available in many colors, although I typically paint my models so black, white and gray are my most often used. Love the four packs as well. I have noticed some warping in the cardboard spools but I can usually straighten them with my fingers and then hit them with a little super glue to stiffen. Great overall at current price.

Good general filament. Prints well. Feeds well. Good price.

Great quality Filament. Printed a lot better than the unbranded Filament. Good price and no tangles while printing. I purchased the black and Gray colors and did not have any problem clogging. I ran on the bambu lab mini

works fine with P1S. I use this filament in the AMS by removing the sides of the spools and then placing the core into an extra spool. in my experience glue on the plate is more important with this filament. very happy with how the filament melts together to produce a nice finish. seems harder and tougher than standard PLA. This is now my standard go to filament, works great, easy to get from az.

Tried the recommended setting for this PLA+ and it under extruded after the first few layers. Tried again with slightly higher temp settings, and got the same result. It was so bad that I could just crush the print into a ball with my hand. Switched to a spool of eSun pla+ at the same settings and got a nearly perfect print. This stuff is junk.

Had a lot of print quality issues to begin with. Also had build plate adhesion problems and feed problems. Once i got my Heat set correctly and first layer setting good It is amazingly good. in my opinion it is way better than regular pla and more durable. I'm am somewhat new to 3d printing but after many YouTube videos and many articles I thought myself how to set the temps correctly. So these are my settings with the Lotmaxx Shark. First Layer Print speed is 25 No cooling 57c for build plate and 230 starting temp. Then I go to 220 for the rest of the print and leave my build plat at 57c with 70% cooling print speed at 50.If I'm doing a lot of bridging than i go to 100% cooling. The only problem at the high temps is that you need to pay attention to your joint tolerance as it may stick together. If you do a print in place with super tight tolerances. best I've got to work at these temps on a tolerance test is .25. If i run my nozzle any cooler than 220 than i have feed issues unless I slow the print speed down. Most print in place things are completely fine. I also have starting print on glass and seems to do just fine.

-The "2kg 2 pack" is not two 2kg spools. It's two 1kg spools- Other than the slightly confusing listing, I'm always super happy with the Overture Professional PLA. Its my all around favorite to use. The print quality and accuracy is excellent. Performance is excellent. Very strong and plenty tough. Overture filament was the first filament I bought, years and years ago, when I was still on my Ender. Even after trying out dozens of other brands, I still go to overture for their PLA and ASA.

I’ve used many PLA brands, but this spool from Overture has serious winding problems. The filament is wound extremely tight, and there are clear signs of internal cross-overs and tangles inside the spool. When feeding directly into the printer, it barely works, but once used in a Bambu Lab AMS, it becomes a nightmare. The spool does not unwind smoothly at all — it pulls for a moment and then suddenly jams, causing under-extrusion, failed first layers, and random blobs of filament. I even tried loosening the spool manually before printing, but the internal tangles remain, and the AMS simply cannot pull it reliably. I eventually had to re-spool the entire filament onto another empty spool just to make it usable. If you are using a Bambu AMS, I do not recommend this filament. The winding quality is poor enough to cause constant print failures. Choose a brand with better spool quality or a proper plastic spool instead.

This PLA gives consistent results. It sticks to the bed without falling off while printing and still releases easy enough when done printing.