Yakamoz 3Pcs 1/4" Shank Bowl Tray Template Router Bit Set with Ball Bearing

Very good set of bit and at a great price. They worked very well in my CNC router and produced the results that I was wanting.

They work well for rounding corners and making grooves

For entry level these work great. My only complaint is you have to make sure the screw on the black piece is tight. I have lost 1 screw. I am still able to use them, just have to make sure the piece doesn’t slip off

Did about 10 linear feet at about 1/4" depth with the 1/4" bit. No scorching - nice cut

great bits, well designed.

I have a palm router & wanted to try to make a tray. Went to a specialty store & found a deal on some 15/16" African Black Limba I glued 2 pieces together that were approximately 7" X 7" sq. I had a design in mind that I had drawn on top & used my drill press with different sized forstner bits to "hog out" the bulk of wood (inside the design of the tray). I used the 3 new router bits to smooth out the walls and round out/down the corners & where the walls meet the bottom. So everything now looked & felt smoother more fluid, not edgey. Then I take a basic 1/4" round over bit and go over the outside edges of the tray, top side and the bottom side, just to knock off the rough edges.

These router bits worked as described. I made my own pattern for the bowl I wanted to make. There was a bit of a learning curve, but was overall pleased with their performance. Having three different diameters was helpful as I had to switch out to different sizes to finish my bowl.

Used them to route 8-4” round “cups”. The Allen screw that secures the bearing came out on the 3rd cup and is lost. Not happy about that. Yes, I checked it before I used it. The cutting edge got a bit dull about the 5th cup and had some tear out. Not bad, so I can fix it. But I would’ve expected it to last longer than that. Not sure they’re worth the risk. But you get what you pay for and these were cheap.