ZINUS Arnav 26 cm Metal Bed Frame | Wood Slat Support | Easy Assembly | Double | Black

I don’t write reviews.. I have had a bed frame exactly like this from a name brand in the UK, they all broke in the middle as the legs are too frail & the slats are so weak!!! This bed frame CHANGED MY SLEEP! It’s low to the ground, doesn’t move if you sit down on it (had this issue), thick slats and the frame is impeccable. It’s so solid and works amazing No missing parts, simple instructions, super supportive & theres storage space underneath if you need it! 10/10 I would recommend this.

Perfect height frame for a deep mattress. Can still fit storage boxes underneath, (maximum height 17cm) Really good value for such a sturdy bed frame, easy to assemble and completely squeak-free.

I have a young adult daughter so wanted something trendy and space saving. I opted for the low bed because she likes 2 Mattresses on her bed . We previously had a very pretty but noisy ikea bed . This is fantastic so much stronger. It’s fool proof to put together . Only one bolt was fiddly to line up the side bar needed a little forcing with an extra pair of hands . Other than that it was brilliant. The slats are strong and Velcro into place so no slipping about . The Velcro is very strong ! It’s been up a week , not a single squeak and it’s by far the most solid bed I have ever purchased and we’ve had lots over the years !!! It arrived early and I really can’t fault it . We have laminate floors and it’s not moved . I would definitely recommend this company. I will be buying one for my heavy handed teenage grandson soon

In my small bedroom I couldn't fit in a standard chunky bed. So I made a headboard with a few pieces of wood leftover from a futon and I can walk around it now. The only thing is the velcro stuff holding the wood onto the metal frame that doesn't really stay firm. It is only about 10 inches or 25 ISH cm from the floor so little storage space under but I got the risers perfect for it and got the space. It is sturdy, good function, looks great and very easy to assemble with numbered labels on corners for help

This is such a great product, well priced and great quality. Even the ratchet was a nice surprise. Frame arrived quickly and 20min later was all assembled by my self. Very sturdy, no flex and very quiet (so far).

Very sturdy and easy to assemble

I’ve built tons of bases from this brand. They’re all pretty straightforward and fast to assemble. I chose this base because I needed a much lower one and sturdier than the other that seem to squeak no matter what I tried. This was my best purchase from them by far! Assembly was super easy and quick - I love that they have a sticky side to cling onto the mattress so it doesn’t slide around like my others did. I have always had a king sized so it’s a big deal to keep it stable and in place for me. No noise detected while moving and love the bases rubberized bottoms so it doesn’t sound like it’s scratching the wood floors! Overall best value for money and super simple base for a super king bed! I’ll be moving in a few months so takedown will be easy (although nothing beats the foldable base ones) and set up will be a breeze again!

My old bed had its day and this is a fantastic replacement solid and compact just what I wanted.

Pros: Well packackaged with no scratches but not a ton of waste. Good quality materials. Well designed - easy to assemble and (almost) everything fits as it should. The parts are organized and well labeled. There are even some spare nuts and bolts (labeled so you don't just think you screwed up...but also extras in the regular spot so I did wonder if I missed something?) which is a nice touch. Most similar companies scrimp on these details. The instructions are clear and simple. They took some care with the product - there are some cute little notecards to use as a bonus. Cutesy but not just plea for a good review. Feels sturdy and should be good mattress support but I'll update if anything goes wrong over the next few months. Cons- one crossbeam us a little warped to one of four bolts won't fit. Not worth return but will definitely shorten the life of the bed. Pretty good experience so far! Will have to see if the one crossbeam holds up.

I bought this bed frame for a new 14" memory foam mattress. I must say that I am very happy with the purchase and I am extremely impressed with the quality of the product. The delivery was a few days faster than original estimate - it's like receiving an unexpected gift! The box seemed to be opened previously as evidenced by the extra packing tape around the edges and upon opening the box, I found that the tie wraps that bind the slats together were cut at one end (there are two bundles of slats and both tie wraps were cut). This originally worried me a bit. However, upon inspecting the rest of the contents, I got convinced all was still well. There was nothing missing, every part was individually wrapped, the hardware was present and still in original packaging without damage and even the padding around the metal parts were in place. The instructions say it's a two person job but I was able to finish the whole task in less than 30 mins, including the unpacking, and the assembly. {Tip to one-person DIY'ers} The box is heavy (good because it's a sturdy unit) so don't try to lift or move on your own. I cut the packing tape with a box cutter along the long edge and both ends. This allowed me to remove each metal bar one by one and set up in my living room for easy assembly. The pieces went together very easily. I was impressed how everything fit well without any forcing, every one of the bolt holes lined up perfectly which allowed manual insertion and tightening of bolts. {Tip to one-person DIY'ers} The end pieces with the legs are free-standing after assembly, so once you stand them upright, attaching the side long bars by myself was very easy. There were some nice touches too: The bolts had all the washers and split washers already installed, they even provided a mini ratchet for the hex bolts. All the parts had numbers on them and each joint had the same number so matching parts to one another was super simple. The wood slats were in two bundles and attached to each other with velcro which made placing them evenly on the frame very easy - no guess work or measurement required. They even included a sticky tape on two of the slats (already installed) to prevent the mattress from slipping. Final nice touch was that there are bolt slots for the end pieces at one end. The holes lined up perfectly with the holes on my existing headboard. I found a couple of long bolts in my tool box. I am extremely happy with this purchase and very impressed with the quality of the product. I like it better than the slightly cheaper model from the same brand which has bars at the bottom too. This design with the legs makes it look more elegant and makes it easy to clean underneath with vacuum or sweeper.

Great sturdy bed and easy to assemble

the frame is wonderful. low to ground, easy to assemble and on top of everything they give you a pretty neat wrench to put everything together, i was able to put everything together in 20 mins give or take. i have a hybrid mattress which is pretty heavy on its own. on top of that it carries the weight of two people easily. At first the wooden panels were not my favorite, there is room for improvement as a slightly stronger adhesive or partial wooden panels on each side from the middle might be better. However once the mattress is on top and you give it a day or two it is perfect. the mattress doesn't slide thanks to the adhesive on two of the panels. overall very happy with the purchase.

The Bad (not that bad): The hex key that came with it was cheap and deformed. I imagine it could have made it through assembling the thing but my quality one (metric 5) with a rounded head made life a lot easier so I would have used that anyway. Similarly, some of the bolts are really close to the frame so it would be annoying to use the supplied hex but that's kind of anything you buy these days. Lastly, it said you have 7 inches off the ground but it's more like 6.5. Only a problem to me because I have keyboard cases that are 6.75 inch tall so that little difference means I have to lift the bed and frame, but it's not heavy. Lastly, my box spring slides on it but I am not sure that is a fair complaint as it's not supposed to have one. The Good: Took me maybe 20 minutes to assemble and most of that time was unpacking. It is super straight forward. All the stickers with the marking are on the inside of the frame so you don't have to take them off, making future disassembly and res assembly easy. I am typically an instruction reader but after the first piece I didn't need it, the thing is so simple to put together. It is also very compact so this is a bed frame that would not be hard to move, probably would fit in my Accord Coupe without putting the back seats down. At first, I was weary about the slats, they are held down with Velcro. However, once I put them on, they do not seem like they are going to move. If they do, so many ways to make it work, and I probably don't even need them with my box spring, but I can't imagine them moving. Seems ultra sturdy, time will tell, but even a high end IKEA bed moves a bit. This is solid as can be. No adult activities yet, but I did bounce around, no squeaks. All the hardware was better quality than I thought, minus the hex key. The frame is very simple, so if you like modern, it's simple and understated. The materials lead me to believe this will outlive my bed, maybe myself, but I have no concerns about longevity. The metal (not sure what type as it is powder coated) seems very strong, and the coating is attractive. Box was compact, packaged well, so even though it looked like it had a rough shipping process, no scratches or anything. I will update this review if things change. I can tell that any issue, unless a weld fails, would be super easily solved with a simple DIY fix that anyone could do but I will update if I am wrong.