BAMF 3-Way Coax Cable Splitter Bi-Directional MoCA 5-2300MHz

Used these to split a MoCA coax feed to several boxes. We have a Comcast router+modem, and so we have this splitting the street and 2 Hitron MoCA boxes to the MoCA-enabled router. It worked phenomenal and gives us gig-speed speeds over the Moca line and feeds our router at the same time. Advice with this product: - If you do a similar setup remember THE ROUTER CABLE MUST BE ON THE INPUT PORT, NOT YOUR STREET CABLE. When i did this wrong, the router did not connect to the internet. - P.S- Don't forget the line filter to stop the signal from reaching your neighbor's houses.

This magical device saved my marriage and made my child love me again! A few days ago, we suddenly and unexpectedly had no TV signal right at the end of Dancing with the Stars. I was happily reading my book when wife and daughter came to me near tears! The TV wasn't working! I found this to be really strange as our TV antenna had been pulling in broadcasts without interruption for over two years since we got rid of cable. I checked everything along the way, and all seemed to be in working order, but I looked at the old coax splitter that was between my wonderful antenna on the roof and the TV. This thing came with the house and has gone through multiple satellite providers and cable TV connects and disconnects. Scattered on the ground were it's discarded brethren, left to rust in the weather after being replaced by uncaring contractors or an uncaring service provider. Hoping for an easy fix, I dutifully drove to Target in pouring rain in search of a replacement splitter. Alas, one was not to be found, so home to Amazon where I found this splitter's little brother (only a two way splitter) marked as "Amazon's Choice." Hope filled me, and I searched for a 3-Way splitter made by BAMF Manufacturing, and to my delight they made one! One order and paitiently waiting for Prime shipping, and absolute success! The old splitter and it's fallen brethren have been tossed into the rubbish bin, and we have TV signal again. In fact, according to the revered TiVo's signal meter, we have a significantly stronger signal than we had before! Thank you BAMF Manufacturing! If your device could exist on a pedestal next to our TiVo we would display it there with pride!

Works great. Very stable. I’m satisfied

At first glance the case seems to be made of pot metal. That's fine, it works. DirecTV installed a 4 way splitter with only 3 jacks connected. I figured the additional split and open connection would cause a lower signal at each outlet. We have experienced intermittent problems with the spot beam local channels, which are always the weakest signal. This 3 way splitter did not make a big difference, perhaps a 2 db gain, which I expected. What seems to have helped more is a quality surge protector with EMI/RFI filtering. Between those two fixes, our local channels are now stable. I also noticed DireTV's splitter was rated to 2.1 GHz, while this says 2.3 GHz. No, I did not connect a scope and signal generator to test this claim. DirecTV's splitter is also made of aluminum. Overall, this is a fine balanced splitter. ***Update*** We still have intermittent problems with the local channels on one TV. However, the frequency and severity has decreased. The other two TV's are just about perfect. The problem is a tree blocking the signal. This quality splitter gave that extra one or 2 db we needed to maintain a perfect picture. I highly recommend BAMF, and will definitely purchase this brand again and again!

One of my TVs still had some pixelation even after installing a filter. I found this splitter that had lower resistance hoping it would help. I also replaced the cable with a larger diameter cable. Problem solved.

I installed this on my hub outside of my house and at first I didn't think it was working because my Moca Adapters weren't linking. I had comcast techs come out three times to check the wiring and make sure there wasn't an oddball amplifier or something throwing it off. The last tech actually removed the splitter and told me it wouldn't work with comcast. After the final tech came out, I was about ready to give up and return everything until I decided to change out all of the coax cables. Turns out I just had a bad coax cable the whole time. It's a shame comcast techs don't know what they're doing. That or they feign ignorance to sell more crappy products. Long story short, the splitter works perfect.

Bought this splitter to go with in conjunction with my Arris Surfboard modem. I was installing Comcast internet in my home and after seeing all the good reviews on this splitter I decided to buy one. This splitter is heavy and very well made. I was offered 75up/10down internet speeds from Comcast and after I got everything installed and tested, I'm pulling a rock solid 90up/12down speeds with zero packet loss!!! I can't say for certain how much this splitter is helping with this but it is part of the system I have in place so it deserves credit. As a hardcore gamer, I'm a happy customer. I highly recommend

This is my third splitter with this company I feel it is a good product some are less expensive, but I know the picture quality is good, so I have stayed with them. However this last order I ran into a bit of a problem with the unit. When I tried to secure the ground wire the hole for the screw was either to small or the screw was to large? Fortunately I found a screw in my own hardware that I was able to use.

Je l'utilise pour la transmission de mon Ethernet dans les câbles coaxial de la tv, il est important d'avoir les haute fréquences au dessus de 1200 Mhz, et il fonctionne jusqu'à 2300 Mhz. Il faudrait ajouter dans la description de l'appareil qu'il est compatible avec le protocole Moca 1, Moca 2 et Moca 2.5 ! J'ai testé les vitesses jusqu'à 1 gb, mon pc n'ayant pas encore sa carte 2.5 gb très stable à 947.28 Mbps down et 878.74 Mbps en up