AIRPLATE S3, Quiet Cooling Fan System 6" with Speed Control, for Home Theater AV Cabinets

Great fan, very quiet and perfect retrofit for my cabinet.

Muy silencioso, excelente calidad, es posible conectar múltiples kits a un solo puerto USB, además de incluir eliminador en caso de requerirse. El tamaño con todo y placa es de 15 CM y cerca de 4 cm de profundidad

This fan works GREAT and QUIET. I have this fan installed in an enclosed TOP Back blowing air out of an enclosed cabinet. The BOTTOM back of the enclosed cabinet has about a 5 inch round hole. The fan can easily change the flow of air based on your situation. I also purchased the AIRCOM S9 and that is also PERFECT. This is a good set-up for my situation based on my opinion and probably will not fit your configuration. I have a ROTEL AMP and then the AIRCOM S9 sits on that blowing air up and a ROTEL PRE-AMP sits on the AIRCOMS9. So, the AIRCOM is in the middle of the AIRCOM. My previous fan was so loud, it seemed there was an airplane taking off in my family room. Oh, the AIRCOMS9 is set for 3/4 on as that seems to be a good setting for me based on moving air and noise. Other reviewer have also set it at this setting.... I used an accurate temperature gauge 6-inches from the open gaps of the Rotel and it was registering 150+ degrees plus WITHOUT the fans. The fans bought the cabinet temperature to 10-12 degrees plus the temperature in the house (ie house temp is 75 then the cabinet would be around 85 degrees 6 inches above the rotel opening). THIS IS FANTASTIC. The product looks GREAT and it is QUIET!!!! It looks PROFESSIONAL.... Oh, I have a power strip so there is no reason for me to buy the remote option. I don't want power constantly going to the Rotels as our electric flickers too much!!! But, I do like remotes. Oh, the fan comes with a cut out for easy installation!!! What a GREAT product.

I was frankly surprised by the quality. Nicely brushed anodized aluminum mounting plate so that one may have it on a visible side if one wished. Decent installation instructions were included along with a plastic template. I bought an additional fan with the temperature controller and plugged this into that and it all works together nicely. Someone else mentioned that there was some vibration -- but while that may be true, it's minimal and unnoticeable in my application since our console has a hardwood backing of some density and strength. I suspect the other reviewers backing (an Ikea product) may not have had the same ability to dampen vibration. Which points to something that should be taken into consideration -- if your application and contemplated placement is too thin then you could consider a visible side as the mounting plate is quite attractive and wouldn't be a eyesore by any stretch. So, on the low setting the fan runs very quietly and undoubtedly will last a good many years.

I have this installed in a small cabinet that houses some computer equipment, (router, switches, NAS and some power bricks). With the door closed I could tell it was getting warm inside. Installed this - easy. Cut a 4in square hole (template provided) and slip in. Packaging and instructions - you could just tell that extra care was put into that, not that packaging is important but it gives you a better feeling on the overall product. Works great, very quiet, no louder than the equipment it is trying to keep cooler. I have it on low and does not look out of place when you look at the grill plate from the outside.