Waterdrop Spin Down Sediment Filter, Backwash Whole House Water Filter System for Well Water, 40-50 Micron, 1" MNPT + 3/4" FNPT + 3/4" MNPT, Traps Sand, BPA Free, WD-RPFK

I recently purchased the Waterdrop WD-RPFK and I must say, it's a standout product in its category! From the moment I unboxed it, the quality was evident. Every component feels sturdy and well-crafted, assuring me that it's built to last. What really sets this installation kit apart is its versatility. The kit comes fully equipped with an array of options that cater to various installation needs. Whether you're a novice DIYer or a seasoned handyman, the instructions are clear and the variety of fittings ensure that it fits seamlessly with different plumbing systems. Installation was a breeze. The kit includes all the necessary tools, and the components fit together perfectly without any hassle. It’s clear that Waterdrop has put a lot of thought into making the setup as straightforward as possible. In use, the system performs exceptionally well. Water quality has noticeably improved, with a significant reduction in contaminants. It's reassuring to know that what we're drinking is clean and safe. Overall, I highly recommend the Waterdrop WD-RPFK to anyone in the market for a reliable and high-quality installation kit. It's not just a purchase but an investment in quality and health. Five stars!

I had a previous lower quality unit that blew out the seals and I could not repair it. This unit is so much better quality. Took me no time to install with the included shark bite connectors. No leaks and didn’t have to redo any of my work. I did swap the filter screen to the included 500 micron filter. I have well water and use this filter for my outside faucets and sprinkler system only.

Placed this on one of our yard hydrants so that sand from our well doesn't keep clogging up our sprinklers. Works great and is super easy to clear out sediment with valve on the bottom. Very well built with solid, heavy parts.

The small hose to let the filter water come out was small and very short. We had to buy a longer hose so we could drain the water to the outside. Other than that, the system is fine.

This product works as it should and is easy to install. Its been in for six months and no issues yet.

This is a quality product and I suspected it was a soon as I picked up the box. I guess I’m kind of old-school when it comes to plumbing products, if it feels heavy enough to be exhibit A in a murder trial, it’s probably OK. The primary housing is a quality piece of cast brass expertly machined to appropriate standards. It comes with fittings, allowing you to convert it from 1 inch to three-quarter inch and as an extra bonus it comes with two shark bite, three-quarter inch adapters. These easy to use push connectors cost $10 apiece if you go to buy them separately. The ball cock on the bottom serves as an easy clean function, and also will release the pressure on the system in case you want to take it apart to give the filter a more detailed cleaning. The filter is a permanent one made of stainless steel or some closely related alloy. Things you should know; first it’s a clear housing in a high impact quality plastic. This allows you to visually inspect the filter to see if it needs a flushing. However, if it’s in direct sunlight, it can turn into kind of a terrarium, and you’ll get algae growth. You can solve that by draping an old towel over it. The other thing you should know is it’s not really a filter it’s a pre-filter. It is a 50 µm built-in system. It will handle dirt, fine sediment, bits of sand even rust, but it’s not going to take out absolutely everything. Depending on your situation and the quality of water, it might be fine by itself or you might want to follow it with a different system down stream with a 1 or 5 µm filter to really do the job. This prefilter will greatly extend the life of your filtration system. Make those expensive replacement filters last longer.

Would give it 5 Stars for functionality and build, but does not seem to follow standard plumbing and will LEAK. They have a unions, these unions allow you to remove product easily without removing fittings etc. Mainly for Service. However the Gaskets for the union. Half Dallor size Rigid plastic do not seal. Most unions use a rubber or moldable rubber, these are plastic. They leak. Read instructions again, they expect the sealant to be the UNION Threads. It says 10 wraps of teflon around the union threads. I had to remove, added silicon grease to both sides of the white PLASTIC washers, and also teflon, and TFE paste. This fixed my leakes. However, for such a quality device, they unions should have rubber gaskets. I would suggest not using the unions, get nipples, use the inner threads, and put your own 3/4" unions on the inlet and outlet of the unit. I am sure many others have had similar issues with sealing.

nice filter and work really good

fit well, easy to us over all was easily installed

I installed this on my water line after my pressure tank from my surface well to catch sediments. After a year of use, It still in good quality and work's well. You can see if sand is trap's in the bottom so you just open the drain valve and the spring push the separator down and clear the deposit. I fitted a hose in the bottom so the water flow directly to my drain. My plumber who worked on my house said it was well made and good quality

Value for money.

Nicely machined, high quality unit

Purchased product as a support to finer filter system. It catches larger contaminates before the reach the finer filter, however after a short time the o'ring became worn and united started to leak, upon contacting the supplier about a new o'ring their representative, Carina sent me a whole new unit!! The gesture was very much appreciated and will allow me to fix the leaking issue. Definitely a well supported product that I would recommend to anyone needing such a system