Bike Spoke Adjustment Wrench Bicycle Rim Truing Tool Set of 2

Our four bikes have had a number of spills over the years and I decided to tune the wheels to remove some of the wobbles. If you are going to get rid of minor wobbles, or half remove some larger wobbles, this spoke wrench will do the trick. While you can buy or set up a jig and completely remove tires and tubes to do this like processionals do, for moderate straightening you can use this inexpensive wrench with bike simply turned over and using brake to detect wobbles and straighten them most of the way. I just flip over the bike and spin wheel while slowly pushing one brake pad and watching for place where rim bumps out a bit. I then use a pencil to mark the spot of furthest outward movement. Then I adjust about five or six spokes, loosening three and tightening three on the opposite rim side. I will say that you should be careful if the bike is old/has a lot of exposure to elements. Two bad things can happen due to rust. Firstly the spokes can snap. In the case of observable I would take off tire and tube, and spray the threaded parts of spokes and also the threaded parts of nuts or "spoke caps" with wd 40. Also if the top of the spoke cap is rusted, turning it can blow your tube, so you want the tube off while you turn. I can not speak to the specifics of the hardness of the alloy/s used in this tool, but I adjusted about 50 spokes on four bikes using this wrench and it did not fail or strip out.

Good tools for adjusting spoke tightness. Good value. Easy to use and small to fit in tool pouch

I saw the price for these and thought ; All right ! Great price for 2 spoke wrenches . On with the red loop around it fit perfectly on my spoke nipples . #14 size ! So I thought the number #14 on the multi size would fit as well . It wouldn’t fit on either side . I looked closely at the inside of the square section and could see little raised spots of chrome plating and I took a small file and cleaned up the inside and took the burrs off and now it fits perfectly on the spoke nipples . I marked both ends of the wrench so I could easily use the right section and get the job done . If I need the other sizes later on I will check them for proper fitting also . Works well and I would recommend them for a cheap option for adjusting your spokes . E-Bikes and Bicycles , not sure about motorcycles but you can try it .

Good product I have to order these every time I get ready to use one to tighten the smoke up on my bicycle E bike wheels so I am glad they are inexpensive and very thankful. Be nice to have a place where I can keep them. I’m gonna try to hold onto this one no problem with shipment received order Everything in package as described.

I had a crackling noise coming from my rear wheel on my E-bike and YT University said it was the spokes loose, and sure enough I tried it, tensioned the spokes and the noise is gone. The round tool is what worked, the red one didn't fit.

The red handle doesn't fit 12-gauge spokes, it's too small. The round wrench is nice because it fits several different sizes.

Very nice fit on the spoke nipples, was exactly as described

Good

Seen this for 6 dollars and thought oh that's not going to be good. Read the reviews and said "it can't be that bad". Took the gamble DnD ordered it anyway as I needed it and couldn't justify paying 30 for a "good" one. It arrived very fast like 3 days and I live in a remote spot.. It worked perfectly. I took my time (as I was scared from the reviews) and it worked beautifully I'm sure the 30 ones are better some how. I'm also sure for 6 dollars your not wasting your money. It worked perfect for me and it's now part of my kit. Don't be jabby Mark the slot that works best for you Don't try to over tighten.

Excelnte producto muy util y sencillo de utilizar

Justo la herramienta que necesitaba para balancear la llanta de la bici de mi hijo. Muy buena compra

Everything ok.

Bonne qualité