Amico 12 Pack 6 Inch LED Recessed Lighting, Canless Wafer Downlight, White | 5CCT 2700K-5000K, 5%-100% Dimmable, Ultra-thin, Metal housing, 1050LM 12W 120V, IC & Damp Rated, ETL & FCC, 50000h Life Span

These recessed LED lights exceeded our expectations. Installation was quick and easy, the selectable color temperatures are a great feature, and they provide bright, even lighting. The ultra-thin design fits perfectly in tight spaces and gives the room a clean, modern look. Excellent quality for the price, and I would definitely purchase them again.

I've installed a lot of lighting like this, so I'm definitely not new to the product nor the procedure. I've got to say that I'm a bit impressed with the quality of these -- they're comparable to what you might buy at the big-box home improvement chains in every way, but at a fraction of the cost. They were packaged very well, and not a single problem with any of them -- no crumpled gaskets, no twisted wires, no bent housings, no missing or broken parts. The installation experience was identical for each one, no troubles at all. More importantly, their performance is outstanding. The light throw is very thorough and even with absolutely no hot spots or shadows. And I am a bit impressed with their light output -- they're BRIGHT! And what I mean by that is they make more than enough light for their size, so it won't take many to evenly light a given space or room. The only complaint I have is on the diameter. They're Ø6.7", and they recommend cutting a 6.25" hole, leaving less than 1/4" of a lip for the light to hold onto. That leaves virtually no room for error, so if you plan to cut the hole by hand, be very, very, VERY careful that you undercut (and use a utility knife with a fresh blade rather than a keyhole saw). If you use a hole saw, the ones designed for 6" recessed lighting are usually 6-3/8", so you're in dangerous waters if you use one of those. In any case for drywall, if you somehow crumble or tear the edge of your hole, it WILL be visible when the light is installed. I used an adjustable hole saw (a Klein 53710), which could be adjusted in 1/4" increments, so I was able to cut the recommend size hole without any error, but it took a little effort to line up the light in the hole to make sure there were no visible gaps. Overall, this is an excellent buy. i can't speak on the longevity, of course, but given the overall quality and performance, I expect that these will last for many years.

⭐️⭐️⭐️⭐️⭐️ Excellent Quality, Easy Installation, and Great Brightness! I recently installed the Amico 12 Pack 6" Ultra-Thin LED Recessed Ceiling Lights, and I couldn’t be happier with the results. The lights are incredibly slim, making them perfect for areas where traditional cans won’t fit. Installation was straightforward thanks to the included junction boxes, and the build quality feels solid and reliable. The 5CCT selectable color temperatures are a huge bonus—being able to choose the perfect warmth or coolness for each room makes a noticeable difference. At 1050 lumens, each light is impressively bright while still only using 12W, so it's energy-efficient without sacrificing performance. They dim smoothly with no flicker, and the ETL & FCC certifications give extra peace of mind regarding safety and quality. Overall, these lights transformed my space and look fantastic. Excellent value for the price—highly recommended!

So far, so good. Bought these because the electrician said to get these to replace (FINALLY) the old fluorescent lights in the basement. Excellent price and easy for him to install. One light replaced one fluorescent monster and is equal to a 75 watt bulb. Bright enough that we’re putting dimmer switches in. Simple design that sits flush in ceiling tiles. 4th picture is with 2 lights on and 5th picture is with 4 lights to show brightness. Only drawback, electrician says the driver (ballast) will need replacing before the lights burn out, but that will be far in the future.

I have submitted a review on this same brand name with very high ratings. The product I reviewed earlier features a night light mode. You can find that review somewhere near this one. This version does NOT have night light mode, but I bought these for my garage/shop and didn't think that the romantic, mood lighting was all that necessary. (I mean, who could resist, "Hey, baby wanna see my table saw?") All the very positive things I had to say about the other version apply equally here. These are wonderful lights. I installed eight of them in my shop to augment the existing single LED, and I am able to work out there quite comfortably. It is VERY bright. It took a couple of hours to put in all eight and hook them up. I even added a separate switch for these so I could use the garage overhead light alone when I didn't need the extra foot-candles. Set the color temperature to 5000K and put on your shades!!

For $59.99, no complaints...but 1 recommendation if you buy: When you trace the template onto your ceiling, cut inside of the line by a few millimeters. You will risk having holes that are too big even cutting on your line or just inside of the line. Err on the side of too small, test fit it, then remove more if needed. You will be a sad camper if you don't test fit until after cutting all of your holes only to discover you have gaps around your lights. The lights work well. See included pic (ignore ongoing remodel work). Being able to select the brightness and whiteness of the light was critical for me. I was able to match the tone with the smaller lights I put in front of the wall of books. Issues to be aware of: 1. Cut a few mm to the inside of the template 2. The metal box is a thinner gauge than other wafer lights I've used. Probably not an issue unless you snap in your fittings like a gorilla. 3. The gasket sucks. If you need to use the gasket, look elsewhere. I'm not using it but initially I tested it out. Like the template, this item is sloppy. 4. The wire gauge is on the smaller side. Smaller than I'd like but I'm sure it's fine for the draw of power these LEDs require.

Arrrived quickly and packaged well. The products were VERY easy to install. I used an inexpensive circle cutter for wood/drywall. The wiring was super easy given the included connectors which worked well with 12-2 romex. There lights do not flicker AT ALL, not even under super dimming. Very pleased with this product and may purchase more for kitchen and hallway.

We put these all over our house and I absolutely love them. My husband is an electrician so it but he said even a novice could figure it out they are super easy to install and because they’re adjustable and he Britney’s was perfect. I prefer white lighting and my husband prefers warm so we went with warm in the bedrooms and white in the living spaces. The color adjustment were perfect. I liked the dimmable brightness and they have been super reliable so far. We put them in a year ago.