Dual Cure Polyester Gloss

I first saw Solarez on a you tube video. You paint it on your project and put it under U.V. light, I took it outside into the sun. It cures crystal clear and rock hard very quickly (we're talking less than 15 minutes). It works great as a finish over your wood projects and can be used it to make various repairs on things that need to stay clear.

Very clear and easy to use for clear coating pool cues

The resin is cloudy and has a green tint out of the bottle. Cloudy when cured too. Someone at the company tried telling me that it “clearly says on the bottle that it needs to be mixed”. It doesn’t say that anywhere and mixing didn’t help. It’s cloudy and green throughout, even if you try to sand and polish it. Either the product was defective or it is just disappointing, but customer service wasn’t much of a help

Probably the best company for this type of product. Very good product, as always.

Very clear and cured very well but to thick to use on wood for finish

Very good clear coat using it to coat turquoise we found here in New Mexico

In the never-ending hurt for something that works better/faster, I ignored some of the bad reviews and gave Solarez a try. After only a few projects, I have a hard time understanding what could have gone wrong for those that had problems with this product. I have not attempted the dual cure option or direct sunlight either, my application cure has been strictly via UV lights that I also bought on Amazon. As with any epoxy coating, it is nearly impossible to get perfectly smooth; therefore, if you need a perfectly smooth surface, some sanding is required. Additionally, since sanding is required, a few coats are needed to ensure one doesn't sand through the coating. Prior to Solarez, my epoxy coatings would require at least 24 hours between coatings and 48 to 72 hours before sanding. With Solarez, I can apply 3 coats and start sand within an hour. Of course, bringing the final finish to a high gloss shine still takes the same amount of effort starting with 320 grit sandpaper and working towards 2000 grit before wet sanding with micromesh. You can contact me [email protected] for Amazon UV light information or more about my Solarez application information.

Picture of item appears like its a gallon size