YESWELDER TIG Welding Torch WP-20F Flexible Head Water-Cooled 250Amp Welding Torch 25ft Cable

Amazing product Amazing price Amazing quality Amazing delivery

my old hose was leaking at the torch. i bought a new hose from the weld shop an it still leaked. i decided to give this a try. it was easy to install. mounted it to my miller dynasty in 15 minutes. i ran a test weld a 170 amp. it works great. i think i will buy another one for my miller syncro 250.

I have gone through 2 wp17 series torchs so far, they always end up cracking and leaking mad argon from me constantly pushing the rates 150 amp output right to and past that level. The welder has no issues running at 200 amps on 220v at nearly 100% duty cycle so of course something has to give, it's the air cooled 17 torch every time. Wanted to go with a roto flex setup but really wanted the 25' hose length so I can ground to a table and easily walk all around it. Next is to get a longer ground but for now that's on the wish list. Just having the torch hose length is amazing and let me tell you even running the ghetto rigged with a 5 gallon bucket and a 100psi surflo diaphragm pump (there is a small air leak on the intake side so it prevents it from ever hitting full pressure or in sure I would blow the lines off or just pop holes in them but with the slightly undersized threads for the adapter on the intake side it allows a tiny bit of air to enter and keeps anything from over pressurizing on me. The torch stays cool to the touch even after running at 170 amps welding aluminum for a good 15 min straight. The cup on the other hand is stupid hot but the torch body and even the head is cool enough to touch. I need to add a radiator to help cool off the water or maybe a emersive cooler to cool it off, make sure you add some sort of coolant to prevent corrosion and or any sort of anodic erosion due to not all metals being the exact same, I have brass and stainless steel metal in the loop and in sure a radiator will add copper which will definitely encourage erosion short of a zinc sacrificial rod in the tank. Anyhow a lil water wetter or some of that orange anti freeze has anti corrosive properties for aluminum which is the one you gotta watch the most. So far so good, I had the pump otherwise that would have been about 120 but the bucket was free and the 6mm quick connect fittings were under 20 for the full set and don't leak even a lil bit, need to get longer intake and outlet hoses but for now it works and I can't believe it took me this long to go water cooled. My mistake should have done it years ago so should you and for the price you can't go wrong. Just use your arc stinger to attach the power and use some quick connect fittings to hook up to the argon outlet and even the in and out water lines. Done deal, I wrapped my adapter in electrical tape to keep it from accidentally shorting or zapping me.

“ Magic Tape “? It’s Velcro , My mistake for even ordering. Ordered a different one with a zipper .

Great quality, hoses and torch for the money. I was expecting some cheap piece of crap, but was pleasantly surprised.

just what I needed

eveything was as advertised. Shipping was prompt. all good here. we will prob use you again!

Nice unit, works well

Las mangueras no son de la mejor calidad, pero en general la antorcha se siente muy bien por el precio que tiene. Si la recomiendo.

As good as any and cant beat the price. I own a big welding shop and the knuckle draggers will cut them up no matter how much you spend and this worked perfect. Save some money and buy this.

works good, fittings seal, I needed a small tip to get into a tight area to weld, welding 1/4 inch steel plate. Works as good as my $400. one.

I was overheating my air cooled TIG torch big time and needed something liquid cooled that wouldn't cost a fortune. I've been using this for a few months now with a homemade water cooler and I'm quite impressed. The torch itself is very compact but can take all the heat I need without issue. The handle never gets hot at all. The only issue I have with the torch is that it doesn't fit regular sized accessories but thats quite minor.

This torch is almost a good deal. Loved the hose shroud. Unfortunately when my showed up it had a blockage in the water lines. I could blow air through the inlet and hear just a little air hissing out from the return. Upon blowing air into the return it would clog up again. Bounced back and forth between the return and sending line trying to clear the obstruction but no luck. Went to go an disassemble the torch to figure out the culprit and found the lines don't have proper crimped fittings to screw onto the torch. Instead the manufacturer just put the hoses onto to the male threads and hose clamped them so theres no popping those off without messing up the hose and clamps. Exposed threads will cut through the hose and it WILL leak either gas or water. I was relieved I didn't get the chance to hook it up and flood a fuel tank with water while I'm big trying to weld it. See big d's pics if you want to know what the torch looks like under the handle. Trying to return it, I was flabbergasted that I was offered the option for tech support to call me to help service an un-serviceable torch. I expect it to work out of the box when it's new. If I wanted to fix up a torch I'd buy a used one from FB market place. Now I'm in a spot trying to get 250a torch asap to finish the job. Would have spent another 30$ for this torch if it had the proper 3 fittings on the hoses for the handle and a quality check before it left the factory.