AV1000 Powerline Ethernet Adapter KIT - Gigabit Port, Nano Size

Simple solution between wifi and ethernet. Rather than running wires, you plug 1 unit into the wall and your router, then the other unit to your computer/console. Since these are single port units I'll explain this: 2 units will provide internet to 1 device, 3 units will provide for 2 devices. If you get a 2 port unit it WILL work with these. As for use, downloads will be slower, but the ping is faster. For example the game 'street fighter' runs better. But a larger game like battlefield you won't feel a difference, but the consistency of ping will be better.

I needed a reliable wired connection in a room too far from the router to run a long ethernet cable, and this handled it well. Setup was simple, plug one adapter into the outlet near your router and connect it with an ethernet cable, then plug the second adapter into an outlet in the other room and run a cable to your device. No pairing needed, it connected on its own within a minute. Once it was running, a speed test on the wired connection showed 26.3 Mbps download, 16.7 Mbps upload, and 26 ms latency, which matched what my internet plan allows. The only downside was the first outlet I tried was on a different circuit than the router, and it simply wouldn't connect until I moved it to an outlet on the same circuit. Once I did that, it worked without issue. Two things to know before buying. First, this is ethernet only, it will not boost or extend your wifi, so it's not the fix if weak wireless signal is your problem. Second, both adapters need to be plugged straight into the wall on the same electrical circuit, never into a power strip or surge protector, or they won't communicate properly. If you need a stable wired line for a TV, console, or work setup and don't want to run cable through your walls, this gets the job done.

Keep in mind that any powerline adapter is ETHERNET ONLY. You cannot use a powerline adapter to extend your wifi or mesh. This is really good for somebody who really really needs a wired Ethernet connection but is too far from the router and doesn’t want to run a 100 plus foot cable onto the wall/floor and around things with a possible signal loss due to cable length. Disclaimer: Our ISP is coaxial only. We can’t get fiber at our house and cable is the next best option. My review is based on that type of connection. Here’s how it worked for me: I also ordered a couple of cat8 Ethernet cables (overkill maybe but I want the best speed and latency possible at any given time no compromises and the cat8’s were about 5 bucks each so why not go all in?) and this system. They also came with their own Ethernet cables I had no idea they would but the stock ones I’m not using. I was surprised to find that it actually worked on its own without any paring needed. At first I had the router end plugged into the far corner of the living room on its own outlet but that one was too far and the speed was pretty low. I moved it to a busier outlet that was a bit closer to my room from the living room and still managed to get it plugged in on its own and the speed jumped right back up. The other end goes to my console, and while my in-game performance was doing pretty well over wifi, there would be occasional spikes. This seems to have eliminated that but at first when i had it on the far outlet the latency seemed much much worse than wifi. In game latency at first setup jumped from 32 (over wifi) to over 70-80 with this system but then after a few days it came back down. I also do remote play sometimes so this helps a little on the sending end with stability. The consoles NATIVE speed test now shows around 28-36ms ping (I was getting that over wifi too) and about 40 or so in game. Interesting enough my in-game used to stay around 30 or so but those spikes seem to be gone so the extra 8-10 loss in my game doesn’t feel too big for the better stability that I now have. I thought this might just be a server issue but I use the same server as I did before and it’s just a little higher not noticeably. Keep in mind you HAVE to plug both adapters directly into an outlet no matter what for these to be effective. Absolutely no surge protectors or extension cords or none of that. Overall this works good for me, it fixed most of what I needed it to, and provides a wired Ethernet connection without being close to the router as I’m unable to anyway. Speeds remain the same as before though no change.

The TP-Link AV1000 Powerline Ethernet Adapter KIT (TL-PA7017 KIT) is a solid option for extending wired internet without running long cables. I like the plug-and-play setup—you just connect one adapter to your router and the other to your device, and you’re online in seconds. The gigabit port gives fast speeds, perfect for streaming, gaming, or even powering network gear in places where WiFi isn’t stable. That said, the big catch is that it only works if both adapters are on the same electrical circuit. If they’re on separate breakers or panels, they won’t communicate. This limitation means it may not work in all homes or larger setups. ✅ Pros: Easy setup—plug, pair, and play Gigabit port for fast wired speeds Compact, unobtrusive design Energy-saving mode helps cut power use when idle ❌ Cons: Must be on the same electrical circuit to work Performance can vary depending on wiring quality Doesn’t replace running a dedicated Ethernet line in tricky cases 💡 Tips: Before buying multiple sets, test in your home to make sure the outlets are on the same circuit. Avoid plugging into power strips or surge protectors—plug directly into the wall for best performance. If you need coverage across multiple circuits, consider a mesh WiFi system instead. Bottom Line: If your outlets are on the same circuit, this kit delivers fast and stable Ethernet without the hassle of long cables. Just be mindful of the electrical wiring limitations.

Bought this to connect from my router in one room to my computer in the next room. Did not want to run a long cable around the wall, thru the door, and back to the computer. Also did not want to drill a hole through the wall. Seemed like it should work. Everything on the same network - in fact, two outlets on the opposite sides of the same wall. Hooked up, and it connected immediately. Problem is that I am getting 600Mb out of the router, but only 40 Mb out of the powerline and to my computer. I checked through their FAQ's and online docs, and they say I should get up to about 200Mb. Nothing remotely like the 1000 or 1GB numbers they show in their advertisements. Even when I plugged both powerlines into the same outlet I could only get a little over 200Mb. So, basically, it works, but not well enough to be useful. Sending it back.

Must have if you can’t run ethernet through your house. I get about 100 MBP/s with this. Easy to setup up as one end connects to your router and another into your computer or console. Speeds may not be the fastest but it provides stability

I had an older version of the TPlink that worked great. It was still functioning at the time of this review. It had older ethernet data port which capped the data rate at 100Mbps. Fiber service offered more speed than that older model could deliver. The newer AV1000 doubled my speed in comparison to the previous modules. I was up and running in under 10 minutes. One module in basement, one in the top of barn. Time is minimal if you have identified which outlets/circuits work as a pair. Tip***Try pairing both modules in the same room first. It's possible that the room may have multiple circuits that do not talk to each other. if they don't pair, move ONE module to another outlet and try to pair again. if not successful just repeat the pattern, different outlet, maybe different room. Due to the various ages of home and electrical wiring from old handymen to to Professionals following codes for wiring, your outcome may vary.

Disappointing but functional. I am getting 15 megabits over modern house wiring.