SINGER Iron-On Mending Fabric – Black – 7in x 16in

I used this to mend a shred in a filmy dress of my granddaughter's (new puppy). It was very easy to use. The instructions are clear. It turned out really well. It is white so you will have to put it behind but I arranged the shredded pieces over the top and the soft flower pattern causes it to disappear. It has not been washed yet but it looks pretty sturdy. I am sure I will use it again.

Update: It’s been 5 months and I’ve washed the blouse at least once a week (a few weeks up to three times), the patch is still perfect! It is the same white color; no yellowing! The corners and edges are still adhered to the garment; no rolling! The cuts that I made on the patch have not frayed either! I’m very impressed with the value I’ve gotten out of these patches! I highly recommend this product! I have put another patch on a garment with a scratchy tag that was sewed into the seam so you can’t cut it out. Covering the tag with this patch has been wonderful! I did cutoff as much of the tag as I could so that I could iron on and have it adhere to the garment as much as possible. This has worked as well and it’s been washed for about 3 months and still no issues! It’s nice to know products can still be made with quality and not everything is junk! ———original——- So I used this for the first time and ironed on a patch where a blouse got ripped at the collar from a hanger that had a nail or staple sticking out of it at a hotel (this why I like the plastic hangers). So I cut out a patch 3 times the size of the tear and ironed it on from the inside and then a small patch on the outside to just cover the tear. It looks good and it is completely covered by the collar. I like how thin these are and once ironed on they are a bit translucent so you can see the blouses pattern through it and it seems to move with the cloth instead of being rigid like most patches. With its ability to be on the inside and the thinness of the patch, I really cannot feel it on my neck. So I’m extremely happy with this solution! The big test is how will it hold up in the washer and dryer! Most patches will start curling and losing their adhesive after a couple of washes so we shall see! But for now I’m very happy!

Iron needs to be HOT but not TOO hot - very hard to regulate! They do work ! Be careful or they will mess up your iron by melting on it. I was able to scrape the patch material off, while iron was hot.

I used this fabric patch to repair a sizeable hole my dog clawed into the dog bed. I cut it down to the size I needed using regular scissors. Following the instructions, it went on pretty quickly and is adhering well. It's fairly inexpensive; would be nice if it came in multiple colors instead of white only. Since, I've just applied it, I'll return to update the review after it's been on for several weeks. Well, it took longer than two weeks for me to get back to this review. (17 months). The patch is now really no longer “patching”, but it did last for a good long while; almost a year. Then it started to peel and looks like it does now (see pic). It was a good investment to avoid having to buy a new bed. I guess I could patch it again, but I think I’ll just buy a new bed at this point.

If you are looking for a heavy duty patch material which will be under relatively heavy stress, this is not what you want. This is a relatively light patch material which is perfect for those small holes in clothing. Just cut out a patch, then iron it on. Just ironing it on should give you a good bond, but you can also sew it along the edge just to make sure. Unlike some patching material, you can sew through this with no problems. You can also mend longer tears and cuts but match the material composition to the patch and you may want to sew it. My most recent patching job was to a pair of brand new uniform pants I was given. The material was quite a bit heavier than that of my usual patching efforts, but it all still worked well. Of course the sewing made sure that the patch material would hold. My problem was that the former owner had cut the legs to fit his somewhat shorter height so there was barely enough material for a 3/8 inch hem. I cut two long strip of this material 1.5 inches wide, then folded them in half, hot-iron bonded them to each leg and, finally, sewed them to each leg all of which lengthened the legs and will keep them from fraying. Then I sewed the hem as it would usually be done. The lengthening does not show because it is inside the pant legs and the pant legs are now long enough. In the past I have usually purchased this material in much smaller squares so it was nice to have this much larger piece. I have used the material to patch all sorts of things. Getting three pieces for just slightly more than the price of one was a great deal. If you are mending something like a shirt, cut the patch out with a pinking shears which will help the patch blend into the material and the outline will be less likely to show through the material. Experiment a bit to see what heat is best with your iron.

It got the job done, but I don't think I would buy it again. It's good in a pinch, but I don't see this being my go to item to mend clothing.

This is great to patch up a small rip, tear or hole in your clothing. From personal experience it has held up during washes and in the dryer. To ensure iron patch works correctly I would suggest you wait at least 24 hours before using or washing your clothing to keep the patch from peeling off.

I bought this iron-on fabric not to fix a hole in something but to make 2 of my kiddo's shirts more comfortable for her to wear. Late last year I bought her 2 long-sleeve tops with super cute sequined animals on the chest... she loved both of them... but when she tried to wear one we found that the tops were not made very well... the back of the sequin appliques was not covered and was not at all soft or comfortable. I will be sure to check that in the future when buying. The poke-y stitching just scraped back and forth over her and it was not long before she had to change. She really likes the tops and as we head into colder weather again she wants to wear them. I found this iron-on fabric and decided to try this to cover the scratchy part inside the tops so she could comfortably wear them... and it worked perfectly! These iron-ons are pretty soft and feel fine while she is wearing the tops. We are both super happy that we dont have to dump those shirts. Super easy to use. Adhered great. Feels decent.