Smartphone / Tablet Cup Mount Holder Car Cradle Kit - Black (Cup mount arm length 5.5 inches)

For the money, this is one of the better ones out there. After going through several products in several years, I found this one the easiest to use and the most flexible for your car or truck. I have used it in both my old F150 and my wife's Impala. Works great. Holds both my Galaxy and my wife's S4 and daughter's iPhone. Also holds one of our small old Dell tablet. Adjusts well, fits all of the drink holders I've tried so far. Fits securely and holds tight! We have had very bad washboard roads due to the packed ice and snow this year and it has held over bumpy travel to/from work 60 miles a day. No problems.

I've used this for about a week now (even though I bought it a month ago), mostly for my iphone. I really like it. My rating should be 4.5 stars, because I think the mount should have a bottom bar to make extra sure my phone holds in place. With that said, the phone has NOT slipped at all yet, so it may not need the bottom bar, but I would just feel more comfortable with it. I tested to make sure my iPad (iPad 2) would fit in the table attachment, and it does, but I haven't tested it while the car was moving. I don't think it will be a problem. I recommend using the extension on it, so that your phone or tablet sit higher in the car. It seems really sturdy and adjusts nicely to fit different cup holder widths (this was beneficial as my cup holder is missing a piece, so adjusting the width really wide, keeps it sturdy). EDIT: Change my rating to 5 stars. Today I discovered why there is no bottom retention bar - so I can charge my phone while it's being held.

I've been looking for a secure way to hold my Note 4 in the car. This mount works pretty well. The arms for the phone are spring loaded and hold the Note 4 with a Spigen Air cushion bumper case securely. You can even put the phone in 1 handed once you get the hang of it. I haven't tried the tablet holder part yet, but it seems like it would hold pretty well too. I bought this for my phone (phablet?) The base can take either the phone holder head or the tablet holder head. Either head slides into the top part of the base on a rail with a plastic spring lock that's molded into the part. iKross also includes a small extension that allows you to offset the head from the base by about 3 inches, however in my use, I found that the offset extender caused the phone to bounce too much and that the press lock on the extension didn't engage properly with the base and the phone holder, so it had a tendency to slip out. I just use the phone holder/head with the base directly and have no phone bounce and it's locked in place. The tilt and rotation adjustments allow you to get the phone so it's legible and not crooked. It takes a bit of trial and error to get it right, so please don't do this while the car is moving! The base is interesting and works well in the cup holder. You need to be careful to avoid over expanding the base when you put it in the cup holder. This expansion is what keeps the holder stable, it's expands to keep the mount stationary. It has a collar that you twist to expand or contract the base. The base has 4 sections that expand from the center when you twist the collar, expanding the bottom half of the base in 4 pie shaped pieces. There's an edge (rim) around the expanding pieces that seems like it can sit flush with the top of a cup holder, or, in my case, can sit inside the body of the cup holder. I have the base all the way down in my cup holder (2013 VW Passat TDI SEL in the US) and the rim seems like it could be expanded enough to break the cup holder body if you weren't careful. You just need to take time to make it tight enough without going crazy and you should be ok. This design will only work with cup holders that are sturdy since this works by applying pressure to the inside of the cup holder. The cup holder that you put this mount in doesn't need to be a single continuously piece, but it will have some pressure put on it by the holder so it can't be a skeletal frame design like BMW used in the E39 (1997-2003 5 series) or some of the newer BMW holders that pop out from the dash board near the vents. I think Porsche uses this in the current 911 models. It should be good in most GM cars that I've seen.

It does work to some extent. I have an ipad 6 and it's pretty heavy and when in this device if I just go over any bump the unit will snap down a notch or two and I have to keep resetting it. I then noticed that the part that comes down if I put a hose clamp over it before putting on the holder then I can tighten the hose clamp so that the holder will not go down when going over a bump. Go to Home Depot or Lowes and get a 3/4 inch hose clamp and put on the device just above where you screw to tighten the device into the cup holder. They should have thought of this when designing it and put a screw type that would lock the holder into position.

I did not know what to expect because the product is made of plastic, but it works great. It holds both my iPhone and iPad-NOT simultaneously; and that is all right. I mostly use the iPhone holder, but installing the adapter for the iPad is easy. I would definitely recommend this product to anyone needing a neat gadget to hold her or his iPhone or iPad (I have the iPad2, by the way. The adjustable adapters appears able to hold the newest or latest iPhones or iPads. The iPad adapter is neat enough to where I fold it and keep it in my middle console below the radio-not even the largest console in the car. I really enjoy this holder!

You know how I know a mount is useless? When it fails not once, but TWICE as you're leaving your PARKING SPOT. That's right ladies and gentlemen, the tablet mount couldn't withstand the simple act of shifting out of 'park' and pressing the accelerator; it's not even as if I was trying to leave a tight spot on the street--I have a private parking spot. "Which tablet could he have possibly been using so as to render the mount useless?" you may be asking. It's not a 12.9" iPad Pro. It's not a 9.7" iPad. It's a Samsung Galaxy Tab A 8". You know, the flimsy plastic one. You're right once again ladies and gentlemen, the mount couldn't hold a plastic tablet. Once I stopped cursing at the top of my lungs, I mounted the tablet once again and tried to be on my merry way. One avenue later, I knew that it was a lost cause. Really. That's all it survived. The iKross does have one thing going for it; the cup holder part is pretty fantastic. The construction is very sturdy and once (if you have to) you expand it to fit your cup holder, it doesn't budge at all. It's a shame that you then need to ruin it by adding three plastic pieces in a silly K'Nex type of way in order to mount a tablet. With nothing but tiny notches to hold the pieces to each other, the mount is perfect for 2-3 sheets of looseleaf paper. Anything heavier than that and the mount will shake, rattle, roll and disassemble right before your very eyes. It is packed and ready to be returned to Amazon. Don't bother with this mount if you have a tablet.

Works great with both my Note 3 and Note 10.1. Lets be clear on a couple of things. Had a vent clip phone mount before, now the the cradle that holds the phone works in conjunction with this mount, so that's how I use my Note 3 phone. Now the holder for the tablet works great for both phone and tablet. Now with the tablet it took me a few minutes and a couple of tries to figure out a position so I could still shift my car in to gear without the tablet being the way. Once you take some time to do that you'll be very satisfied with this product

Purchased for my iPad Mini, I use it in my work truck ( 2013 E-450 ) fits great, hold the mini landscape just like I wanted it to. I use my iPad for everything including professionally and I use it often. This holder makes my pad convienant, accessible and easily removable which is a big ++ cause I take it in and out of places all the time. On another note: I use my iPad for navigation now due to it being in such a convienant place in the truck and I'm thinking "why did I not do this a long time ago...?" The iPad is a superior navigator over the Garmin nuvi I was using... Superior in every way and did I mention it's superior ? I use Google maps not the built in map app, boy what a difference! No wonder Garmin's, Tom-Tom's and other portable GPS's are getting so cheap. Once people find out their tablets are superior (sorry I won't use that word again) they will never go back. Jeez, I meant to leave a review about this tablet holder.... Anyway I'm very happy with it.

So far so good. Only started using this today, but very satisfactory first impressions. Real simple mechanism - simply twist to increase or decrease the diameter of the section which fit in the cup holder. This creates a tight fitting and very secure mount which you can then attach your phone or your tablet holder to the top of. I've only used it to hold an iPhone 6+ so far, it's ideal. Great value, well made, well packaged and I would recommend.

Ich habe mir das kurze und das längere iKross 2 bestellt, weil ich nicht wußte, wie sich das in der Höhe bei meinem neuen Auto ausgeht. Bin beim kurzen geblieben. Es läßt sich leicht, schnell und einfach montieren, der Spreizmechanismus hält sehr gut und kann auch mit etwas größeren Becherhaltern gut umgehen. Die Halterung vom iPad spannt sich mit einem Federzug und hält das iPad auch sehr gut in Position. Theoretisch kann man es auch leicht um 90° verdrehen, wobei es in mehreren Stufen einrastet. Ist aber für mich theoretisch, weil es in meinem Auto an der Stelle, an der es sitzt nicht genügend Platz hat, um auch hochkant zu stehen. Optional ist auch eine Handyhalterung dabei, die man wahlweise einhängen kann. Da ist aber auch schon der einzige Schwachpunkt, denn dieser Einhakpunkt hat ein bißchen ein Spiel, wodurch das iPad ein wenig wackeln würde. Da ich eh nicht zur Handyhalterung wechseln will, habe ich die iPadHalterung an dieser Stelle mit einem Tropfen Superkleber fixiert. Wackeln beseitig ! Alles in Allem ein gutes braubares Teil, zum kleinen Geld ! Bin sehr zufrieden. Die lange iKross (die ist ident zur kurzen, nur mit einem längeren Hals) werde ich mir auch behalten - hat ja nicht viel gekostet. Vielleicht kann ich die woanders nochmal gut gebrauchen.

muy bien

Très bonne tenue et positionnement pour fixer un smartphone.

Il prodotto è arrivato puntualmente, sembra ben costruito e resistente, si adatta perfettamente al portabicchiere sopracruscotto della mia auto e meno ingombrante di altri e ben fermo, perfetto direi.