CORSAIR VENGEANCE RGB PRO DDR4 RAM 64GB (2x32GB) 3600MHz CL18-22-22-42 1.35V Intel AMD Desktop Computer Memory - Black (CMW64GX4M2D3600C18)

This is a great upgrade, especially since the advent of local AI's consuming all of your systems VRAM and DRAM.My system was upgraded from 4 x 8GB (32GB) ram to two of these (64GB); I then continued to use two of my 8GB to bring my total system memory to 80GB of DRAM. Despite the RAM (potential) mismatch, everything is fine even under the highest loads.These are clearly high quality memory modules, and a step up from the random low-cost stuff; so go ahead and spend perhaps very slightly more when moving your system memory above 32GB. They came well packaged and well protected against drop/vibration and ESD.And the fancy colors dont hurt! (Their default colors are OK with me, but software is avaialble for you to tune the colors to just about anything).When my memory needs increase further (they likely will), I'll immediately and without hesitation purchase another 64GB kit.Highly recommended.

Memoria de Estilo muy Atractivo y De Calidad como los Productos que Siempre Otorga Corsair, Muy Buena compra y Recomendado.

I already have but wanted more 128 gb i will not buy any others because theses are my # 1 of choice in every way

Tried and tested, very fast and high capacity RAM

Good, very very good :thumbsup:

I was a bit nervous with all the people saying that it’s hard to find memory that works with Alienware computers and i am happy to report this memory works great.First thing i did before opening the case was upgrading the bios to current 1.1.1, then i went in and set XMP to disabled.Pictures show my original memory 2x8GB sticks running at 2660 and their timings. This was with XMP disabled. (for reference it was at 3200MHz with XMP profile 2 selected)When i installed this new memory (2x32GB 3600MHZ) it took a scary long time and then the display showed me the page that tells me the memory amount changed. I then went into BIOS to take a look and it all looked OK. before i exited i went to see what XMP options i had and it already selected XMP 1 Profile. I though i would just go with it and see what happens.The computer then booted normally and when i checked the memory stats i was surprised to see that this is now running at the full speed of 3458MHz (max for the dell Alienware motherboard). This is a 30% increase in speed over the Non XMP profile of the original memory.I have tried several applications so far and all seems to be working great.If you have an R12 then this is great. I also removed the old memory completely because i didn’t want to mix and match chips so this was a complete swap. If you try to add this to your existing memory then your results may vary. My computer is working great so I’m not going to see what happens if i add in the old memory.

Este producto es de buena calidad, es como se describe en la pagina.

These DIMMs were plug and play. BIOS immediately recognized them and XMP profile was correctly identified as 3600. Been running rock solid in Windows with no issues since installation. Color customization options in iCUE are decent and the LEDs are pretty bright.