LEADTOPS LED Daytime Running light Turn Signal Bulb 24In Switchback Sequential Headlight DRL Strip Flexible Tube Dual Color White Amber/Yellow Angle Eye Neon for Car Motorcyle 2-Pack

DRL looks great on Peugeot 206, had to cut them a bit and seal the ends as well to prevent water going in. To all the people who says they draw additional power, it means they wired them incorrectly and maybe straight to the battery. I recommend putting glue(hot glue gun) on a control box as well just to have a peace of mind. the easiest way to wire them is to buy fuse piggybacks, and wire it up to an unused fuse or to a fuse which only activates when the ignition is on. I wired mine to the fuse that controls inside lighting in the car adding a 5amps fuse to the circuit. the draw from my calculation is 1.3 amps. If you have a PY21W bulb for the turn signal you will have to leave it, without them the car is going to thinks it doesn't have a bulb, and the strip does not provide enough resistance to operate normally so, the turn signal is going to blink really fast like there is no bulb in there. Overall great product and looks good. For the additional improvement I recommend switching the whole headlight to all LED setup.

Looks and works great nice and bright no issues installing. Wirering nice and easy if you use a fuse piggy back with a 5amp fuse.

Love the product. A bit of a trial and error with the installation only because I did it without it a tester. But hell yeah works great.

Bought thees there look strong and it was a good prise to not put them on the car yet but I am over the moon with them better than the last ones I bought

Well, the first point is adhesion. Even though the headlights were cleaned IPA solvent, they don't stick. Luckily for me the gap between the top of the headlights and the hood when closed is perfect for keeping them in place. The second issue I have is with the light output. It appears the white light is brighter on one side of the tape and the orange on the other. I had to choose which was more important and put this side towards the headlights as the other side is more hidden by the hood. So not perfect but I'm still glad I installed them.

Unable to use as the sticky side of tape is on the wrong side of light totally wasted my time and my mancanic time with a crap put together by people who just don't look at what they are making. Had to binned it cheers

Had to add more adhesive even though the area had been cleaned with strong alcohol wipes.

Easy to fit great look on Rav4

Fades after a few months. Seams like the product lifetime is limited

Acquistato il prodotto per la mia Citroen C3 del 2004. Facile il montaggio e buona luminosità

Excelente funcionan muy biem, todo en tiempo y forma. Muy recomendable

Ser ut bra men inte testat än

I ordered these to upgrade the current LED setup I already had in my headlights. Very nice and bright lights. The driver looks like it is nicely done circuit board. The LED strip itself is nice quality too. I read Eli's review and it's a bit over the top on criticism. First off yes the lights have a delay between switchback. The amber is fast but slow back to white. That is not a uncommon situation when you are using capacitors to make the delay. And really it is hard to properly judge the exact amount of microfarad you would need to work unless every strip was the same length and the same voltage on all vehicles. Yes the driver is not sealed very well. Just seal it with some hot glue and be aware of where you will mount it. I stuffed mine inside the headlight housing after sealing it. I didn't care for the sequence feature so I did rewire the output side of the driver so they will just flash. If you look at the board you can see they have multiple wires outputting for amber, one for white, and one ground. Just cut amber positive wires except for one. Then join all amber positive wires to the one positive wire for amber. Now you don't have sequence. It's that simple. I have only ren them for a couple days consistently so time will tell how they tolerate weather and such. I am very impressed for the price