2 PCS FEP Release Film, 200 x 140 mm 0.15-0.2 mm Thick Transparent Separator Sheet for Photon Resin UV LCD 3D Printer or SLA DLP 3D Printer Accessory

Description

Parameter: Material: high quality plastic. Color: transparent. Size: 200 mm * 140 mm (7.88*5.51 inch) Thickness: 0.15 mm-0.2 mm (0.006-0.008 inch). Light Transmittance: 95% Fit for: SLA/DLP 3D Printer Applicable Models: ANYCUBIC PHOTON/ EZ3DX X-5 X-6/ KLD-LCD1268-A1/ makex m-jewelry m-one/ MICROMAKE/ MINIQ/ MouldX/ nova3d/ SPARKMAKER/ Uniz Slash/ X-CUBE/ XMAKE/ WanHao Duplicator 7 Installqtion steps: 1. Remove 8 screws to detach the steel rings from the resin vat. 2. Remove the 24 screws to seperate the steel rings and change the FEP film. 3. Put the new FEP film in-between the two steel rings and install those 24 screws back. You may need to force the screw in. 4. Install the steel rings back to the resin vat and ensure the FEP film is clean and tensioned properly. Package list: 2 x FEP Release Film Review: Pretty decent film - Decent quality FEP film, used in my case on a PhotonS. Size and flexibility of the sheets is ideal for the resin vat and as long as you take care to avoid denting it it lasts reasonably well in the printer. Personally I think this lasts slightly fewer prints than the 'official' film, but I could be wrong (or it could be the complexity of some prints), but overall it's good value for money