ScotchBlue Original Multi-Surface Painters Tape, 2 Inch Wide (1.88 in. x 60 Yds), 1 Roll Blue Paint Tape Protects Surfaces & Removes Easily, Masking Tape for Indoor and Outdoor Use (2090-48NC)

High-quality blue tape, safe for painted surfaces. Can be reused multiple times. I've saved strips of tape to reuse over and over, and have to say this brand stays "sticky" for several uses. One of the reasons I continue to buy from them. Why not reuse the tape when you can?!

This ScotchBlue painter’s tape works exactly as expected and makes my projects so much easier. I’ve been using it for many years. It sticks well without peeling up while painting, but removes cleanly without damaging walls or leaving behind sticky residue. I’ve used it on trim, baseboards, and around windows, and it gives me clean paint lines every time. I’m currently using it on my banisters that I’m stripping and re-staining and as always, it’s working great. The 2-inch width is perfect for covering larger areas quickly, and the rolls last a long time with moderate use. This painters tape is definitely a reliable, high-quality tape that I’ll keep buying for future DIY projects. It may be a little pricier than other brands, but it’s well worth the higher cost. (Try using an off brand tape just once and you’ll most likely regret it). Highly recommend!

Great painters tape. When used right, leaves a nice clean edge with no tearing or pulling. Removes without effort and no marring. Can be used to mask off edges on a wall, or pieces of project you don't want painted so is very versatile.

This Scotch tape is exactly what I needed for everyday use around the house and office. It sticks well, tears easily, and holds papers, packages, and small projects securely without being frustrating to work with. The quality feels reliable and the dispenser makes it quick and convenient to use. Great value for the price and a product I’ll continue buying.

Used this for trim and edges on a paint job and it worked great. Lines came out clean, no bleeding under the tape. Peeled off easy afterward without pulling paint or leaving sticky residue behind, even after sitting for a couple days before I got around to removing it. 2 inch width was good for wider areas, made the job go a lil faster than the skinny tape. Only downside — didn't stick great on one rougher textured wall spot, had to double up the tape there.

This stuff is the real deal. It’s dependable, strong, and incredibly easy to work with, it tears cleanly, sticks well, and removes without taking paint with it. Exactly what you want from painter’s tape. The listing highlights its use on multiple surfaces (walls, trim, glass, metal), and it definitely lives up to that. It holds firmly during painting but still peels off smoothly without leaving residue or damaging the finish. Here’s how it stacks up across the key features: • Stickiness: Just right — strong enough to stay put, but not so aggressive that it pulls paint or leaves marks. • Thickness: Feels sturdy and substantial, not thin or flimsy like cheaper tapes. • Durability: Holds up well during long paint sessions and doesn’t curl or lift at the edges. • Value for money: A single 60‑yard roll goes a long way, and the reliability makes it worth the price. • Texture: Smooth, consistent surface that seals well and prevents paint bleed. • Design: The classic blue color is easy to see while working, and the 2‑inch width gives great coverage for clean, sharp lines. Overall, this is the painter’s tape you can trust - strong, predictable, and easy to remove without hassle.

Perfect tape. Great price. Sturdy and sticks.

Great product. Doesn’t leave residue. Safe on car paint to clean headlights.

Perfecta!!! Yo también la compré para utilizar con una impresora 3D y el resultado es excelente. Bien es cierto que es bastante mas cara que otras (las típicas de color amarillo), pero esta no se arruga como las otras, en caso de que utilice la cama caliente de la impresora. Las piezas se quedan muy bien adheridas mientras se están fabricando y una vez finalizada la impresión no cuesta excesivamente desprenderlas si se hace con un poco de cuidado. Además al ser el rollo de 50 metros, aunque sea caro, tienes para un montón de recambios de la cama de la impresora, ya que como digo, si extraes las piezas con cuidado, ni se rompe ni se resiente. Muy recomendada esta cinta. Yo compré el modelo de 48mm de ancho.

3Dプリンターで吸着力を上げるために使用。 ABSなどの反りやすく剥がれやすい素材でも吸着してくれます。 幅が広く手でちぎれるので貼り付けるのも楽。 接触面に軽い模様がつくが気になるほどではない。

Makes painting much easier. Take the time to cover door and window frames and flooring. Make sure you check price as it seems to vary a lot and recent purchases have been cheaper at local hardware store.

everything was great, i mean it's been recommended online a lot

Auch ich zweckentfremde dieses Klebeband für meinen 3D Drucker mit PETG Filament und bin begeistert. Nachdem ich sehr viele Oberflächen ausprobiert habe (Buildtak, Glas - mit und ohne Prittstift) bin ich nun bei ScotchBlue gelandet. Hier haften die Ausdrucke tatsächlich genau richtig. Auf dem Buildtak haben die Ausdrucke zu gut gehaftet, wodurch ich diese nur sehr, sehr schwer entfernen konnte. Letztendlich hat es mir dann diese teuere Oberfläche immer weiter zerlegt. Auf Spezial-Glas (Ender 3 mit Microbeschichtung) hat es nicht gut genug gehalten. Zwar sind kleine Drucke gut geworden, allerdings haben sich größere und komplizierte Objekte sehr gerne an den Rändern gehoben (Warping). Vor allem Objekte mit Hohlraum und Wänden waren danach kaum zu gebrauchen. Hier noch ein paar Tipps: - PETG Filament von AmazonBasiscs - PETG nicht auf das Bett quetschen sondern ~0,2mm Distanz lassen - 80 Grad Bett-Temperatur - 240 Grad Nozzle / Düse - Keinerlei Nachbearbeitung der Oberfläche (kein Abschmirgeln o.ä.) Bei Warping: - Ein Raft mit 2 Schichten und 0,2mm Objekt-Distanz wirkt WUNDER bei Warping-Problemen. Noch ein wichtiger Tipp zum Abschluss: Das Filament bleibt nicht ab der 1. Sekunde auf dem Bett haften und neigt dazu, sich nach oben an die Düse zu rollen. Da allerdings die 1. Schicht bekanntlich die wichtigste ist solltet ihr unbedingt sicher stellen, dass der Filament-Anfang nicht nach oben steht und sich bei der 2. Runde am Druckkopf "festhält". Schneidet dazu einfach kurz nach dem Druck-Start dieses hochstehende Ende mit einer Zange ab.