5M LED TV Backlight USB Bias Lighting with 16 Colors and 4 Dynamic Mode for 65 to 75 Inch HDTV,PC Monitor,Led Light Strip

Arrived in 24 hours with prime. Packaged well and small enough to fit through a letterbox if you're out.For others information initially the four LED strips are joined together in one roll but they seperate easily.I started by plugging in the USB cable to the TV which has an AC/DC cable at the other end then attached the main LED strip which is where the AC/DC pin attaches into then placed the final three LED strips around the TV. For informative purposes my TV is 49" and the LED strips were adequate size wise. I cannot confirm for other sizes perhaps other reviews can help with that.Strips are nice and thin on a white backing strip. Adhesion so far seems fine. However from past experience the heating up of the rear of the TV can cause the adhesive to become less effective but for now, day one no issues.LED's are nice and bright absolutely no complaints there. The glow coming from them reflected on the wall behind is very soothing and not overwhelming.The remote is nice one of the nicer ones I have and I have quite a collection gathering now. It's very responsive and works well. None of the available functions aren't working or responding. It should be noted that brightness control only works when you have picked one static colour and it works well. Brightness cannot be increased or decreased when on smooth, fade, strobe or flash unfortunately.This is a far better set than the previous set I bought which developed not one but two faults eights months into use and are now fit for the bin as neither the seller or Amazon are willing to enforce the one year guarantee offered with them and this is why I purchased this set. I wish I'd purchased these in the first place everything about them is much better. I appreciate it's just day one but I'm happy and hopeful. I certainly give my seal of approval and I'm a very fussy consumer.

I looked at several of these on Amazon. This one was much cheaper than some but thought I would have a punt and get this.Arrived next day on Prime and installed the same day. It comes with a dinky remote with lots of coloured buttons, all of which are easily read and understood. You can change the colours with the remote quite easily. You have to position part of it just slightly hanging out from under the TV to get a good signal for the remote.Colours are remembered when you switch the TV back on. I bought the 2 metre one for a 47 inch TV and it's a perfect fit, top and sides. You would need a longer one if you want to do the bottom too.I thought my wife woud think it was tacky but she says it does seem to make a difference. On my TV which is a bout 10 years old it has a visible bezzle so the only downside is that it makes the bezel stand out more.I love this kit, it seems good quality, comes with connectors for going round corners and lots of sticky pads to stick it all onto the TV.All in all, I've given it 5 stars which is rare for me. I can't find any fault with it. A great purchase.Fitted to the TV in literally 5 minutes.I first thought that it didn't switch off when you switch the TV off so I used the remote to switch it off but later realised that it obviously uses up the residual power in it for about 30 seconds after turning the TV off, and then switches off.

This product is easy to install and operate and adds a nice ambiance to wherever it's used. I bought these for my previous tv to backlight it taking a gamble (they're $10, so it's not big loss if you don't like it) and I love it. It adds a great enhancement and it's not distracting at all. That set recently went out and after getting a new one it drove me crazy for the week or so I didn't have the backlights.Installation is quick and easy. I'd recommend plugging in the USB and then applying the light strip so you don't get too far away from the port. The light strips are applied via 3M tape and it is sticky enough to fit and lift and center a time or two before pressing it down all the way. Good part of installing these though, at least in seemingly most cases and mine, is it's going on the back of or is hidden so it doesn't need to be perfectly straight to get quality light output.These strips are able to be shortened or extended in approximate 12" sections with pin/plug sections and connected to additional strips for longer applications. The kits come with 3" extension connectors for use in turning your strips down a tight corner, i.e. going from the side to top of a tv on a right angle.The remotes included are universal to any kit of these lights. I ordered two as I got a larger tv and both operate it as well as the old kit remote does. It includes 4 different lighting modes, dimmer/brightener, an array of color selection and custom colors.The only reason for my 4-star rating is that unless you unplug the USB, when the power source is off (unless that itself is unplugged too) the lights will sporadically flicker on and off. Not a big deal but it's distracting on occasion. I'd honestly give these a 4.8.

Still going strong years on. Great quality. Easy to use. Comes with a remote control but nice setting it on rotating colours. Does not reflect what is on the TV just random colours.

I love this product. It works perfectly, power being supplied from the USB on the rear of the TV. Comes on with the TV and goes off with it if you leave it on via the remote. Colours are great but depending on your wall colour will depend which you choose. I tend to pick one and leave it alone. Take some time to get it fitted equally over the back and sides. If you don't, the light will produce patches and not look great. Two things with regards to the remote sensor. Firstly, placing it so it's not under tension with the power cable is required. Just get it so it naturally sits flat on the rear of the TV. If not, the adhesive let's go after a few hours on this part, the rest remains fine though. If you set it so it sits flat, it stays stuck. Secondly, you don't have to have the sensor showing below the TV. I tested this before I fitted it. I thought it would look naff with that showing but I need not have worried, it works fine with the remote. The colour is not adaptive. You set a colour and it says that colour. It does not change with the TV picture like some standard features of some TVs. I know it may be obvious but just to confirm that.

I bought these to light up a corner display cabinet as I thought it looked dark inside and needed lighting. I decided on these as they would be more interesting than plain white. Super easy to install and bright. The sensor to turn on/off/change colours is infrared, so you need to be able to see it when using the remote, expected this. 16 colours available including plain white or 4 different flash/fade effects. On a static colour the brightness can be changed, very useful and they are overall excellent quality. The lights are equally bright on every setting and colour and don't flicker. They come with an installation guide and further tape if the stuff already stuck to it isn't good enough. Both weren't necessary for me. The lead is a little short, but the right size for its intended purpose, but this was easily rectified with the usb extension I ordered with it. Excellent quality and an excellent price, getting another.

Where to start? I don't know. It seems okay? I think the title is misleading. I thought the USB was 2 metres long, not the lights.There's too much stuff in the box. It's almost overwhelming. For some reason the English instructions are German (Didn't need them, just wanted to check just in case I was gonna screw it up).When I was pealing the sticker off the adhesive, it pealed off the print, not the sticker, the thing that preserves the adhesive sticky anyway. So as a result, it took a long time to separate the adhesive from the sticker. I gave up on one of the strips because it just wasn't coming off. The adhesive is strong, but too strong perhaps. Because you can't bloody peel it off. It makes it almost pointless. You're better off using sellotape.When it sticks, it sticks.There is a slight problem with making a turn where you have to awkwardly bend the connectors (That are provided in another packet in the box).The LED's themselves are nice and bright. I did however get two because I was unsure I'd have enough. Turns out, it is enough. Something that also came as a surprised to me, is the fact they both turn on with the same remote. Though the outputs are close together which might explain it.The USB cable is roughly 40 cm, not very long at all, so you may need an input to output USB cable depending on what TV/Monitor you have. Note: The strips may be too big for a computer monitor.

My tv is 55” & is wall mounted. I put these lights behind it very easily. The sticky back isn’t that sticky but it’s ok. The little clips aren’t that sticky either but I have double sided sticky pads so I used them to mount the clips. Very easy to install. They only light up when the tv is on as they’re plugged into the USB at the back of the tv. Looks amazing in the dark. Doesn’t affect you watching tv either. Really nice lights. I love them.EDIT*****I bought a second set of lights for my new bedroom tv. Again 55”, again they look perfect

Finde diese led Lichter toll ein Fernseher in der Wohnung fehlt noch aber wird auch bald bestellt

Ganz ok

Super einfach hinterm Fernseher an zu bringen und gemütlich beim Fernsehen schauen

Hab das komplett angeklebt am TV angesteckt und jetzt funktioniert die Empfängereinheit nicht. Kann ich auch abgerollt und angeklebt schlecht zurücksenden.

Gefallen hat mir die Helligkeit und das einfache anbringen an den TV. Wasser aber garnicht funktioniert hat ist das umschalten aus der Ferne mit der Fernbedienung. Der Empfänger ist hinterm tv und es kommt einfach kein Signal an außer wenn ich mich 20cm davor stelle, aber das bringt mir nichts wenn ich fürs umschalten immer wieder aufstehen muss.