TAPTES Charger Wall Holder Mount

Really easy install and definitely worth the price. It’s lightweight, surprisingly durable, and made my garage more manageable.

This is an excellent cable organizer...I used this to replace my generic garage wall hook, which functioned fine, but didn't look the best. Everything was well packaged, with simple instructions (but they aren't really needed, just need to mount the wall bracket, then slide down the organizer over the bracket), and the hardware to mount to your wall. Mine came with two sets of wall anchors and screws, which is nice in case you mess up. The organizer itself has a very nice smooth finish. Time will tell if it will get scratched up, but I don't expect it to be an issue. The Tesla charging handle fits into the 'holder' portion very well. I don't have any concerns with the handle falling out onto the floor. I would definitely recommend this product to keep the "charging corner" of your garage looking clean and professional.

For several years we’ve been using a Velcro cable wrap hung on a wall to keep our Tesla home charger cable off the garage floor. It worked okay for awhile, but eventually the Velcro wore out and couldn’t hold it any more. This unit we installed on the wall in less than 10 minutes. I read some of the reviews that indicated sliding the front piece over the mount was really difficult. So I avoided that issue by rubbing some Johnson Paste Wax on the plastic grooves and they slid together easily. We’ve been using it now for a few weeks and are really happy with the purchase. It is a solid piece of plastic and has ample space to wrap the cord around it. Definitely recommended.

First, I like that this is a bigger hook and has room to hold several loops rather than having long loops that can get under foot. The hook is beefy and looks solid, the plug holder works fine (although I wonder why so many of these do not have the plug held vertically instead of sticking out where someone can accidently run into it). The plug holder has a little latch that prevents it from slipping out and its easy to use, you just lift the plug up and it comes right out. Now here is were we run into the 2 issues that ruined this for me. Issue #1: The mounting system is easy to use with a wall mount piece that you install and the main body that slides over it, that is all good. However, once you mount the holder onto the wall it locks into place and its very, very, very hard to separate the base from the wall mount (once it snaps into place). I tried this out before mounting and even tried to put some Teflon spray to see if that could make it easier, but no help. Now I will say, this is on securely but if I ever want to remove it from the wall that will be a problem as its one locked together piece after snapping together. Issue #2: The included screws are too short. This is clearly designed to be used with the drywall anchors (which are included), but why would anyone do that when they can screw it into a stud. Especially for something that will be used daily, it will pull out of the drywall in no time. The included screws are at least 1/4 inch too short and could even be a half inch longer. Now, no big deal unless you don't have all types of screws sitting around. 8/25 - Update The seller reached out to me immediately to discuss my feedback. I greatly appreciated their quick response and attention to my comments. They offered me a refund and let me know that the way the two pieces lock together is by design for stability (which I had mentioned above, it does). So I have increased my rating to 4 as my only issue appears to be a design decision and not a flaw, I can see that. It may not be to my preference and as long as it works for you, this should not be a problem. We have been using this everyday and it works great for us.

Easy installation. Works perfectly! Plenty of hardware supplied to get it installed properly. Nice looking product at an excellent price point.

I really liked the soft-touch plastic this is made of. I snapped one of the screws while drilling it into a stud but I ended up just moving the wall bracket down a tiny bit. The slot feels loose enough that it doesn't seem to be able to have the plug get "stuck" in the slot.

Surprisingly great for the price. I was wondering if it was so cheap because there was something wrong with it but it's great! Easy to install, and my charger fits right into the charger holder. the holder itself has a notch that prevents the charger from falling. very convenient and I highly recommend

Handy for hanging the charging cord, but there’s nothing special about that. It won’t hold the Tesla charging adapter in the hanger like it’s supposed to, so I just have to leave it hanging. The holder slides on to a second piece that is screwed to the wall. The fit was so tight, I could not get it to fully seat without lightly lubricating with silicone first. I would not purchase it again.

was easy to install - well constructed - however the charge plug doesnt fit the front slot as the charge plug on the 2021 Tesla model 3 is bigger than the slot on the dock

This product is just what I needed. I installed a simple wall hook to hold the charging cable, but the charging head just hangs down. Not only does this hold the cable loops, but is also holds the charger head inside the housing, making for a more professional installation. The bracket is well made and appears quite durable. Well worth the price.

Perfect, exactly as advertised

This may be the first time I opened a package and went OMG this is awesome! It has a beautiful mat finish and feel really nice in my hand. It is executed very well. I am so glad I did not order a 3D printed one from another site. For us in Canada they are more expensive as well once delivered. I assembled it in my hand first. Initially I thought the wall screws part was too big. I figured out however on the wall it will be much easier to make it fit because pushing the holder into onto the screw part and then pulling down is much easier. Can it be removed? There are two tabs that click into place. I don’t see a way to release them. So make sure you get it right the first time. For other reasons I’m mounting it on plywood so I can get it of the wall.

It doesn't fit the type 2 charger as seen on advertising photo, not happy, I have wasted my $$,